Jim

Technic General Discussion

Recommended Posts

If you look around, it seems most other themes are largely sold out as well.  (I'm also in the USA.) Maybe they are focusing all manufacturing capacity on the 2021 sets?

Share this post


Link to post
Share on other sites

I prefer to to shop @lego website due to collecting VIP points and free lego gifts and last year I was able to shop a few weeks before but it did take a month later to received my back orders  but the corvid is the reason but no back order options ..hummm  The prices @ amazon are ok but i wouldnt be surprised in the next few days they will go up..  Is this issue only at America?  Just curious 

Edited by sirslayer

Share this post


Link to post
Share on other sites

It's not just Technic. Pretty much every theme is mostly sold out on the U.S. shop. People being stuck at home has dramatically increased demand this year (especially online) even as supply has been impacted by intermittent factory shutdowns.

If you need to get a set before Christmas and can do so safely, I'd recommend checking out physical stores (either a Lego Brand store or a store like Target or Walmart), since they might be slightly more likely to have what you're looking for.

Share this post


Link to post
Share on other sites

Not even a back order option is driving me crazy!!   I wonder how long this will last and when the 2021 models come out, I wouldn't be surprised they will get sold out in the first week!! Crazy!!

Share this post


Link to post
Share on other sites

Number and percent of licensed sets over the years:

2011: 1/10. 10% (Mercedes-Benz)
2012: 0/9. 0%
2013: 0/12. 0%
2014: 1/11. 9% (Volvo)
2015: 1/13. 7% (Mercedes-Benz)
2016: 3/12. 25% (Porsche, Volvo, Claas)
2017: 1/13. 7% (BMW)
2018: 3/14. 21% (Bugatti, Volvo, Mack)
2019: 4/14. 28% (Liebherr, Porsche, Land Rover, Corvette)
2020: 7/14. 50% (Lamborghini, Volvo, Bell-Boeing, Dodge Charger, Ducatti, Top Gear, Claas)
2021: 8/15. 53% (Ferrari, McLaren, Jeep, Monster Jam x2, Caterpillar, Mercedes-Benz, unknown IP for 42126)

 

Numbers of sets with no B model through the years:

2011: 0/10
2012: 0/9
2013: 0/12
2014: 0/11
2015: 0/13
2016: 1/12. 8%. (42056)
2017: 0/13
2018: 1/14. 7%. (42083)
2019: 4/14. 28% (42056, 42099, 42100, 42110)
2020: 8/14. 57% (42107, 42108, 42109, 42111, 42112, 42113, 42114, 42115)

 

Numbers of car and racer sets through the years. SUVs are counted. Off-roaders aren't counted.

2011: 2/10. 20%. (8070, 8081)
2012: 0/9. 
2013: 3/12. 25%. (42000, 42010, 42011)
2014: 3/11. 27%. (42022, 42026, 42027)
2015: 2/13. 15%  (42039, 42033)
2016: 5/12. 41%. (42046, 42047, 42048, 42050, 42056)
2017: 0/13.
2018: 4/14. 28%. (42072, 42073, 42077, 42083)
2019: 5/14. 35% (42090, 42091, 42093, 42096, 42110)
2020: 6/14. 57% (42101, 42103, 42104, 42109, 42111)
2021: 4/14. 28% (42122, 42123, 42124, 42125). Assuming 42126 isn't a car.

Edited by Ngoc Nguyen

Share this post


Link to post
Share on other sites

I'm actually quite happy that the number of licensed sets are increasing. However, I'm not okay the fact that many sets doesn't have B-models...

Share this post


Link to post
Share on other sites

While looking for some interesting MOC to build today, I suddenly remembered the discussion of a white Mobile Crane by a Chinese brand before the release of the 42108 Mobile Crane last year. As far as I recalled some members seemed to be fond of this model and regarded it to be preferable to the 42108 set. 

6934177707001.jpg

 

I managed to find some speed build videos of this model on Youtube, so I plan to recreate it in Stud.io and share the part list and instruction. 

Anyone interested?

@Jim Does my plan violate community standards of any sort? As far as I understand the model is no different from a MOC.

 

 

 

Share this post


Link to post
Share on other sites

...is that a metal Hook? 

I will hunt that set only for that hook

Edited by Dylan M

Share this post


Link to post
Share on other sites
3 hours ago, Ngoc Nguyen said:

Anyone interested?

Absolutely! I've wanted to build it for ages but couldn't find instructions anywhere

Share this post


Link to post
Share on other sites
On 3/30/2021 at 8:39 AM, Ngoc Nguyen said:

@Jim Does my plan violate community standards of any sort? As far as I understand the model is no different from a MOC.

Proceed! Looks like a nifty little crane.

Share this post


Link to post
Share on other sites

I've been looking at that crane a while ago, but couldn't find instructions so I let it go. If you manage to build it in Studi.io I would be happy to add it to my building queue.

Share this post


Link to post
Share on other sites

It is well-established that heavier-than-air, pure Technic models cannot fly, and also that all Technic parts are heavier than air. However, a while ago I had the idea that it could be fun to make a light-as-air flying machine using helium balloons. The operating principle would be very similar to that of the Technic submarines that show up now and then, with the weight of the model carefully adjusted to counteract the lift of the helium balloons. Ideally, it would be tuned to the point that it would have almost the exact same density as air, causing it to remain at the same altitude it is placed in in the air, somewhat like a rather flat helium balloon. Once this equilibrium was set up, the model could be controlled using fans allowing control in X, Y, and Z axes, again, just like Lego submarines.

Of course, this is not at all a true Technic flying machine, but I think it could be quite interesting to see. The only thing that prevented me from trying it originally was cost. My calculations suggested that a bare minimum of twenty balloons would be required to lift the model, and at $1 a piece, I was simply unwilling to throw that kind of money at an uncertain project, that wouldn't even last long until the balloons had leaked past the point of usability. Honestly, I'm really posting it in hopes that one of the more profligate of you users will give this idea a shot to see if it works!

Anyways, that is my idea.

Share this post


Link to post
Share on other sites

Something like that? :-)

Although, it's still powered by non-lego motors, as it seems.... But he also used rather heavy system bricks for a high level of detail. With weight-optimized building, this surely is possible to make it airborne with a much smaller balloon.

 

 

Share this post


Link to post
Share on other sites

Yeah, that is the basic idea.

That's quite a cool model, though it seems a shame that they had to resort to non-Lego electronics!

Share this post


Link to post
Share on other sites
7 hours ago, 2GodBDGlory said:

Yeah, that is the basic idea.

That's quite a cool model, though it seems a shame that they had to resort to non-Lego electronics!

Most likely weight was too much and/or power was too low.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.