makoy

[REVIEW] 75290 Mos Eisley Cantina

The Star Wars forum poll is broken...   

3 members have voted

  1. 1. So please tell us what score you will give this set (1 lowest, 5 being the highest)

    • Comment below instead...
      1
    • ... Thanks!
      3


Recommended Posts

gallery_6705_157_22742.png

Mos Eisley spaceport. You will never find a more wretched hive of scum and villainy. - Obi Wan Kenobi.


 

50339962013_52e9689c1a_h.jpg

 

 

So what is so wretched about this place anyway? Let's find out in my 33rd RA review, 75290 Mos Eisley Cantina.
 

Overview

Name: 75290 - Mos Eisley Cantina
Theme: Star Wars / Master Builder Series
Year: 2020 (2H)
Pieces: 3187
Minifigures: 21
Price: USD 349.99 / EUR 349.99 / GBP 319.99 

 

Introduction

Cantina in Spanish literally means canteen but in modern days it is widely referring to a type of bar with wine, alcohol and appetisers which makes sense because etymologically, it is  derived from the same Italian word for cellar.
50340007828_2f12d7bb92_o.jpg

If you have been following Star Wars, you are probably familiar that there are similar bar scenes in other Star Wars trilogy that tried to recapture the same magic from this scene. But why is the original so special? Undoubtedly, it is the equivalent of a wild west bar or fantasy tavern, but instead of cowboys or elves, there are aliens. The array of aliens alone is the first exposure of the audience in the Star Wars universe, and personally, that is the reason why I think people love the scene so much. There are also many accounts that this scene was penned in the original script and is one of the few scenes in the initial plans that stayed in the final script. To alot of people, the funky music in the cantina stays in their head. One's inability to dislodge this tune is also a wonder of its own, and if you’re one of them, perhaps you are already humming the music in your head. To avid Star Wars fans, the inspiration for the backstory of these patrons are limitless. You might have also heard that in Star Wars, every minor character has a backstory, and this adds to the appeal of the cantina with over 60 characters within the vicinity.

So with that primer, let us dive deep in the Star Wars Master Builder Series - Mos Eisley Cantina.

Once again, big thanks to TLG and the awesome staff of Eurobricks in making this review possible. All opinion about this set is my own.  

 

Front Box Panel

First of all, the right corner really looks like that. It is not black -- it has the binary sunset golden hour background on that right corner only.  

50339859438_fb7d96d233_b.jpg

At 3187 pieces, this is the largest version of Cantina that got released. The first one is a measly 171 parts back in 2004. 


Back Box Panel

50339859408_0b259aab3c_b.jpg

The back shows the typical scenario you would like to set up, but feel free to make your imagination run wild.

 

50339859368_ffd901db55_b.jpg


The side of the box showcases the 21 minifigures that you are getting from this set. 

 

What’s inside the box?
 

Right out of the box, we have numbered plastic bags 10 to 18... so how about the bags labelled 1 to 9?

50339859203_96b6fb33a4_b.jpg

 

Answer:  it is in another smaller white box inside the main box.

50340547706_5fe909ec07_b.jpg

 

After dumping all the contents inside the white box, here's what it looks like:

50340547666_9e239cc24e_b.jpg

 

There are also loose items such as the unbuilt Dewback without its jaw, plastic without number, as well as the instruction book with sticker sheet inside.

 

50339859028_75a6ec40c2_c.jpg

 

Instruction Booklet

Yes, there is a small sticker sheet in this set.

50339859013_7ffc6bef16_b.jpg

Since I have seen the trailer for this set, I already expected there are stickers for the speeders. However, looking at the sticker sheet, the only graphics that I wish the designers insisted to be printed on LEGO element is the droid detector. 

The aurebesh script reads "Cantina" if it wasn't that obvious. The rest of the graphics are not necessary to complete the set. At least, that is how I treat most of these stickers, so I am not going to apply them in my build.

50339858968_2ae4834957.jpg

 

 

The instruction booklet is a brick and a tile tall only.

I wish to use the digital instruction similar to what I have done with big sets that I have build recently. However, as the instructions or PDF is not available at the time of this review, I had no choice but to use the book.

50339858913_d4bb10d98e_b.jpg

 

Now, let's fast forward to the minifigures.

 

Minifigures

Let’s start first with the minifigures because I know a lot of the people are excited about the new aliens introduced in this set. I will summarise my thoughts about the minifigure line up after I ramble about each one of them. So for now, just follow along In my list below I will include the name of the minifigure followed by the race in parenthesis, e.g. Chewbacca (Wookie).

 

50339863558_b5191e83b2_c.jpg

Ponda Baba (Aqualish) is a thug who smuggles spice for Jabba the Hutt alongside his partner in crime, Dr. Evazan. The minifigure sports a new head mould, which many minifigure customisers had dreamt of in years. It is a face only a mother could love -- but look how awesome it is in minifigure form! The designers seriously had balls to put the pinkish bulbous fangs more prominently than it should be. I don’t think they don’t mind if it becomes the butt of all jokes.

50339866193_2fbbab95de.jpg

As you can see from the picture above, the aqualish jaw or the "balls" are too big to even allow movement of the minifigure head. The orange jacket looks nice, with front and back printing. Sadly, no side printing or leg print. 

"Negola dewaghi wool dugger?" - Ponda Baba
"He doesn't like you." - Dr. Evazan

 

50340707287_108547b86d_b.jpg

Dr. Cornelius Evazan (Human) from plant Alsakan famously boasted about having death sentences in 12 systems while picking a fight with Luke and we know it didn't go well after that. This talented cosmetic surgeon got his mind corrupted and went cuckoo to perform “creative surgery” leaving his patients disfigured. Needless to say, his hideous crimes had put bounty on his head. His uneasy partnership with Ponda Baba started after the aqualish thug saved him from a bounty hunter encounter which left his face scarred. 

50340706212_7702104029_c.jpg

Since minifigures generally don’t have noses, this criminal doctor doesn’t look as ugly as he should be. I guess it is fine. The new slightly tattered clothes printing gives him that ragged wanderer vibe. No side or leg printing.

If you recall in Rogue One history lesson, Jyn and Cassian bumped into criminal duo Ponda Baba and Dr. Cornelius Evazan, too. During this time, the duo has already adopted the alias Roofoo and Sawkee respectively.


 

50340552281_61507b73af_h.jpg

Kardue'sai'Malloc (Devaronian) was a cruel army captain from Devaron who fled to Tatooine and hid under the alias Labria. Devaronians skin colour could be brown, purple, red or anything in between.  Being red with pointed horns and awkward grin on his face, he could possibly be the devil himself. Just look. The minifigure looks “cute” but it can get creepier the more you look at it. If you don't like the grin, thankfully there is a second face print that looks disappointed.

50340709727_41400780a2.jpg

The headgear with horns and ears is new. The torso print is also new. Too bad there is no leg print (this is going to be common remark in other minifigures, so get ready...) 

 

50340707012_7055f35e13_c.jpg
Hrchek Kal Fas (Saurin) hailed from planet Durkteel. They look a lot like Trandoshians (remember Bossk?) because they share the same ancestors. Notable difference is that Saurin has a different skin colour and they have 5 fingers instead of 3. Obviously, that won’t matter in minifigure form but at least Hrchek colour is dark tan instead of sand green. I always welcome diversity, so this is awesome. 

In the film, this reptilian droid trader followed C-3PO and R2-D2 outside the cantina, likely thinking how to profit on them, but immediately lost track of the droids in the streets of Mos Eisley. In Star Wars legends, he was also accompanied by another Saurin named Sai'torr Kal Fas who was reported to be his female cousin and bodyguard, too. Sadly, she did not join Hrcheck in this set.

50340554391_417e203933_z.jpg

The head sculpt is the same as Bossk. I like the olive green arms on tan torso part. Although not accurate to the forest green colour, this is better than getting a regular green or dark green,  in my humble opinion. Again, no leg printing. Hrcheck would have benefited from dual moulding because he wears a boot... Unfortunately, we don't get dual moulded legs either.

 

50339863228_83179a6f14_c.jpg

Unlike most patrons in the cantina, Momaw Nadon (Ithorian) is not a criminal or a person of interest. Nicknamed “Hammerhead” in classic Kenner action figures, he was only exiled to Tatooine for revealing the agricultural secrets of his homeworld Itor to the Galactic Empire. He is likely chilling out in the cantina after a day’s work on his secret garden in the southern mountains of Mos Eisley spaceport.

This isn’t the first time Star Wars released an Ithorian minifigure. The first was the Ithorian Jedi Master in set 75051 back in 2014. Oh boy, that was 6 years ago! Hard to believe this is only the second time we are getting another Ithorian minifigure. It is an interesting alien race because they love peace and philosophy, so I reckon we should have more of these in Star Wars. 

50340709777_171e20a59a_z.jpg

This minifigure is one of the few ones that has legs printing. The torso print, front and back, looks appropriate for a farmer alien. 

 

50339863463_ffc14d6fce_c.jpg

Don’t be fooled by this cutesy appearance. Kabe (Chadra-Fan) rhymes with babe, and yes she’s a girl and not a chad, even if Chadra-Fan’s homeworld is called Chad. In the film, she annoys the bartender into giving her blue milk using her high pitch squeak. While not begging for milk, she scams and pickpockets  alongside her buddy Muftak (Talz) which is regrettably not included in this set. If you want to get her a buddy, your only hope is getting the Talz minifigure in set  8085 which was released over 10 years ago.

Indeed, she’s a girl in a cantina. So what is a girl doing in a cantina filled with filthy hoodlums? Based on the canon story "The Kloo Horn Cantina Caper" in the book From a Certain Point of View, she was entangled in a mess that led her life at risk, involving all the aliens in the same cantina booth seen here. Eventually, Han ended the kerfuffle by killing Greedo, which then freed her and Muftak from the messy situation.

50340554356_41e7b0669d_c.jpg

For the minifigure itself, the head is using bat ears, which makes sense because the Chadra-Fan species are rodent-like creatures with bat faces. She has short legs, but I think they should have given her with a clothe skirt to complete the look. No one is going to figure out she's a girl unless they've already dug the deep rabbit hole, which is reading about every cantina patron's backstory. 

 

 

50340552011_4ee401d287_h.jpg

Garindan (Kubaz) is not a patron of Chalmun’s Cantina but he roamed around the streets of Mos Eisley as a spy. Considered to be the greatest  and greediest imperial informant in Mos Eisley, he located the missing droids that the empire is looking for, and passed information to the Sandtroopers which enabled them to catch up with the protagonists before they could even board the Millennium Falcon.

50339865903_420ef1176d_c.jpg

This minifigure torso looks familiar because it looks like an imperial officer uniform, even if it's not. More importantly, many people got interested in this minifigure because of the long snoot nose that is protruding on its head. As seen in the picture, this is achieved by attaching a neck accessory instead of a completely new head mould.

I think TLG should make more aliens with this approach. 

 

So, those are 7 new named Star Wars minifigures in the set. That is equivalent to 5 new alien species, too. 

At this point, I feel like we could have gotten more than 5 new alien species, but more on that later.

 

 

Below are the minifigures that we are more familiar of..

 

Sandtrooper Squad Leader

50340551851_8ef40c85e0_b.jpg

The orange pauldron reveals the rank of this Sandtrooper as Squad Leader. Look beneath the headgear and you'll see a non-Angry Clone Trooper face!

This is good progress.

 

Sandtrooper

50340707122_ffa7ac58c8_b.jpg

The only difference between this and the squad leader is the pauldron. This one got black. It also has a different face print than the squad leader.

TLG, you're spoiling us here! 

In all seriousness, sincere thanks on behalf of all AFOLs who are sick and tired of the Angry Clone Trooper heads.

 

Wuher (Human)

50340551791_118b46a8de_c.jpg

You got to have the bartender if you're running a bar. This is the same one from year 2018.

 

Jawa
50340551621_b0fc4b1a9e_c.jpg

Adding Jawa in this set makes sense. But then, why make it generic? This could have been one of the named Jawa patron inside the cantina... but it's probably too much to ask for a unique torso print. It does not help that many people probably got several (probably even dozen) Jawas from Tatooine Battle Pack back in 2018 that this could have been easily replaced by a different named character or totally new alien species.

 

 

Bith Musician (x3)

Now, the Bith Musicians. Perhaps a little disappointing that none of them ever got named, but I get it. None of them got official names in the previous sets either, so why change now?

In Star Wars canon, there are 8 known band members. Namely:

"Fiery" Figrin D'an (front man) - Kloo Horn
Doikk Na'ts - Dorenian Beshniquel (Fizzz)
Tedn Dahai - fanfar
Tech Mo'r - Ommni box
Ickabel G'ont - Double Jocimer
Nalan Cheel - bandfill
Sun'il Ei'de - drums
Lirin Car'n - backup Kloo Horn

50339863168_002e9f0623_h.jpg

I'd wager that the Bith Musicians included here are the first 3 in that list because Figrin has a silver Kloo Horn, Tedn has gold fanfar and Doikk has black Fizzz.

The LEGO instruction manual recognises all the band members officially but as they all look alike, it makes sense that they are all simply called Bith musicians.  

Fun fact: Do you know what the music genre Figrin D'an and the Model Nodes perform?

It’s called Jizz. Yup, not jazz. It’s called jizz. It is the same genre Max Rebo band plays in the prequels.

 

Greedo (Rodian)

50340551711_3d05d34d9e_c.jpg

Hello Greedo. I don't understand why you don't get side printing when it has been done before in a much cheaper set. Is it because Han shot first? This variant also came in set  75205 back in 2018..

Leg printing is good, but I kinda prefer the leg printing from set 75052 (2014) because it also got printing on hips.

Maybe next time, we won't get any leg printing if TLG follows this trend. Hopefully not, please! 

 

Han Solo (Human)

50339863433_8a373f89d8_b.jpg

Solo, because he isn't many, quite literally, as the origin story implied from that self titled movie that is now canon.

This is the exact same minifigure that appeared in 2 other sets, 75159 and 75205. 

 

Chewbacca (Wookie)
50340707217_963250ae8a_c.jpg

This minifigure is very common now, I can't believe this appeared in 12 other sets. This marks Mos Eisley Cantina as this variant 's 13th appearance.

It's great that we get leg printing here, but as common as this minifigure is, it is already expected.

 

Obi Wan Kenobi / Uncle Ben (Human)

50340551896_a06c58852e_b.jpg


50340709502_3034e8f1c0_z.jpg

The minifigure is exactly the same as the one found in set 75246 (2019).

 

Luke (Human)

50340551821_02739689d3_c.jpg

This variant is considered common too because it appeared in more than 5 sets, including the Star Wars Advent Calendar 2020, set # 75279.

 

C-3PO 

50339863393_738bcd8c64_c.jpg

My copy of C-3PO has a little defect on head printing. If you look at it, C-3PO seems to be looking on his left (your right). It looks funny but I don't know how often this kind of printing error occurs. 

As for the minifigure itself, it is very common too, appearing in 10 sets since first appearance in 2016.

 

R2-D2

50340551676_0df64cc8cf_b.jpg

This variant of R2-D2 appears to be the latest version with "large receptors" (those blue rectangles in front of the dome).

However, the amount of R2-D2 appearances is staggering. Even if this minifigure is relatively new, it is already appearing in 3 other sets, besides this Mos Eisley Cantina set.

 

So that is all about the minifigures included in the set. It is really great that we have 7 new named characters. That is groundbreaking alone. I can't remember this ever happened in any Star Wars set before.

 

With all the minifigures all done, we can proceed on the build details.


 

Build

The moment of truth... we're back on paper again.

50339858893_5b891f92a4_b.jpg

 


 

Bag 1 out of 18
50339858828_1e6e56d657_b.jpg

These parts are meant for the V-35 Landspeeder.  We also get a teal brick separator. 

In this bag, the minifigure included is Luke.

 

Bag #1 progress - some kind of speeder or something

50339858708_f9c80c7f1b_z.jpg

 

I can't remember the last Luke's Landspeeder that I built because I skipped all the recent ones.


 

Bag 2 out of 18

 

50340701782_baa023e1a7_b.jpg

 

Continuing the build for the V-35 Landspeeder, we get all the parts to finish this vehicle. Hrcheck is included in this bag.

 

Bag #2 Progress -  Finally, a different landspeeder !

50340702737_974693b2a7_c.jpg

In between building steps, I took a picture of the reverse stud technique as seen at the tailend of the landspeeder.

Simple and clever way to attach the while windshield part that serves as the support for the 3 thrust turbines.

50340702702_fb1904dd37_c.jpg

 

Quick Comparison: old Luke's Landspeeder vs new V-35 Landspeeder

50339861353_6da9012952_b.jpg

 

NOTE: Luke's Landspeeder is not included in set 75290. It is just added here for comparison

50340705097_a8b46d0baa_b.jpg

I am very relieved that we are not getting yet another Luke's Landspeeder because this V-35 Landspeeder looks awesome. We LEGO Star Wars fans often complain about the umpteenth version of Luke's Landspeeder.

Now that we finally got a new vehicle, this is a big win for the fans as there are less things to complain and bicker about.   

 

 

Bag 3 out of 18 

50340547171_ff0f6b7a7e_b.jpg

Now, here comes the start of the actual Cantina build. The minifigure included in this bag is Wuher, the Cantina bartender who disdains droids.

 

 

Bag #3 Progress - here goes the watering hole 

50340547126_39d4e30415_b.jpg

Basically, bag #3 is the centre counter and beverage dispenser. 

We are on the right track.
 

Bag 4 out of 18
50339858588_9f510bfdfc_b.jpg

We now see more tan and dark tan as we prepare the parts for the booths. Obi Wan Kenobi is included in this bag.

 

Bag #4 Progress - Booths
50340547056_3006803f98_b.jpg

This looks plain right now but it has to be the most refined booth lounge design TLG has designed so far.

 

Bag 5 out of 18
50339858443_073003f108_c.jpg

Step by step, we build up the walls of the cantina. In this bag, Kabe is included.

 

Bag #5 Progress - still working on booths
50340546931_361ec2a26c_b.jpg

Even at the early build progress, it is already looking posh.

 

 

Bag 6 out of 18

50339858373_8363eebeb0_c.jpg

More wall needed for the part. R2-D2 is here.

 

Bag #6 Progress - booths... booths...
50340702352_2348cc80bb_b.jpg

As the wall gets taller, it reminds me how much improvement the Cantina got after several iterations.

 

Bag 7 out of 18
50339858248_f8d2e2c718_c.jpg

More wall needed for the part. C-3PO is here.

 

Bag #7 Progress - booths... booths... booths.
50339858188_6c64d0fe68_b.jpg

With 2 arches almost done, and 3 booths almost complete, we are switching shortly to the lobby after this.


 

Bag 8 out of 18
50340546661_cda9f9c536_b.jpg

Here goes the lobby parts, and one of the Sandtroopers is included here.

 

Progress

50339858028_00e61a78a6_b.jpg

This is not the best angle of the lobby. The angle of the entrance door as well as the construction of the swipe up door is oddly satisfying.

 

Bag 9 out of 18 - Roofs
50340702112_7d68543e82_b.jpg

Parts included here are meant for the dome as well as the arch  of the lobby. Nothing ground-breaking there.

What's groundbreaking is the inclusion of 2 minifigures here - Ponda Baba and Dr. Evazan.

Another new addition in this cantina design are the roofs.  

 

50340702022_5a076c69f0_b.jpg

With the roofs on, there are less light entering the booths. 

When I did my MOC for Chalmun's Cantina many years ago, I remember adding spaces for the walls and tables for LED lights because the original set is very dark that it begs to be lit.

Obviously, this set does not come with any LED lights, but one way or another, people will find ways to light this scene up. I am already thinking about it as I review this set right now. 

 

Bag 10 out of 18

50340546541_b983985baf_b.jpg

What is Cantina without the music. In this bag, we have parts for the other side of the room, including the bandstand where Figrin D'an and the Modal Nodes perform. 

Most appropriately, the Bith musicians are included in this bag.

 

 

Bag #10 Progress - another booth, and stage
50339857883_4f9c8dda7a_b.jpg

This is the other side of the cantina, detached from the rest of the building.

 

 

50340546346_a9f683c940_b.jpg

 

When attached, this is how it looks so far without the walls on the other side.

I am taking a moment to highlight the play feature here that ejects the sitting patron on chair. This is obviously meant for Han Solo and Greedo -- but it is located at the wrong side of the cantina. The concept is not new as similar play feature had been added in set 75205. What's new in this version is that you just need to tap the technic part 6536 to decide who goes down in the laser gun shooting. 

Before I proceed, understand that there are so many layout that exists in the internet that depicts which booth Han and Greedo met for the last time -- it's always been the side nearer to the Dewback. Even with the earliest cantina set, this has always been the case. However, for this set, the booth where you can recreate the Han vs. Greedo scene is on the other side. One could argue it is totally inaccurate -- but I get it, ok? The play feature is added there because the Dewback pen already occupied the space needed for the eject mechanism on the original spot.

I guess this is better than nothing. It does not take away the play feature and only the most critical Star Wars fan will nitpick about this detail anyway. 

 

Bag 11 out of 18
50340701852_3c750c01a5_b.jpg

Bag 11 includes more parts for the far side of the cantina. Momaw is included in this bag.

 

 

Bag #11 Progress - Stage
50339857568_2291160c11_b.jpg

You have to wonder why the bandstand has to look this way. The designers had to take liberty on their design here because it appears more interesting that it should, compared to the film set.

 

Bag 12 out of 18

50340705082_7d4cdfb207_b.jpg
More arches on the way, and Han appears in this bag randomly.(Not so random if you buy the idea that the ejector seats awhile ago could be located anywhere in the cantina)

 

Bag #12 Progress - walls and arches

50339861238_527e7f13f6_b.jpg

The far side of the cantina appears more complete, but we are 4 bags away from completion, so stay with me.

 

Bag 13 out of 18

50340549751_a043ca0185_b.jpg

This bag includes parts for the angled corner of the cantina as well the parts for the other speeder parked outside, the 9000 Z001 landspeeder. In the early blueprints, it is labelled as Ubrickian Landspeeder 9000 Z001, an obvious reference to Kubrick's 2001: A Space Odyssey.

And then, there's Greedo. 

It is suggested in this set that Greedo drives the speeder, but I cannot find references that confirms or denies this. No one really knows who owns this speeder in the movie.  

 

Quick comparison: Old versus New
50340705252_bdec8fcee6_b.jpg

The one on the left is the old model with transparent dishes and grey part 99206. The internals are pretty much the same to the new one except some colour swaps.

I prefer the new one because the clear dishes don't work with me. All you can see is the dark bluish grey bar 1L with tow ball behind them. At least the black dish creates an illusion that those are darkly tinted windows.

 

 

Bag #13 Progress - More arches

50339861053_8bed1e5946_b.jpg

 

Now that the other side of the cantina is fully built, we can connect them together.

50339861018_e7faec0642_b.jpg

 

Bag 14 out of 18

I need to get this out of my chest before I proceed.... I think 2 plastic bags with the same number is fine. But then  3 plastic bags? What is going on here? It does not help that the biggest plastic bag has 2 small plastic bags inside, so there are 4 or 5 plastic bags just for bag(s) # 14.

50340704727_1cb1aa08c1_b.jpg

For the actual contents, these are the parts for more roofs, and storage room at the back.

50340704692_4cd67835e4_b.jpg

 

Bag #14 Progress - more roofs and storage room
50340704242_4a392a4735_b.jpg

 

As mentioned in the instruction manual, the back of the cantina is never seen in any of the films, concept art, animated series or even graphic novel. Therefore, the addition of the storage room at the back is based on creative liberties given to the LEGO designers.

 

Bag 15 out of 18
50339860888_c09264a9b2_b.jpg

Inside are parts needed for the moisture vaporator.

Chewbacca minifigure is also included in this bag, because... why not? 

 

Bag #15 Progress - complex machinery and odd shapes


50340704497_96cae93bec_b.jpg

As far I know, this is the most detailed attempt to create the GX-8 water vaporator. All other previous designs pale in comparison.

The roof that "covers" the rest of the cantina looks odd but I think the gaps are really intentional to allow some light. Frankly, if the designers decided to cover the cantina completely, I won't mind as long as the exterior look presentable.


50340704542_d35131cb56_b.jpg

The moisture vaporator connects to the main building with clips. 

Notice the grey crate box here with the empire symbol on it.

There are 3 of these parts included in the set and they are scattered throughout the build. The aurebesh script reads as "cargo".
50347054333_fb39c77885_m.jpg

 

Bag 16 out of 18

50340549461_2b13ecd33e_b.jpg

Bag #16 includes the part for the Dewback's pen as well as parts to complete the Dewback too (it's jaw and backside)

 

Bag #16 Progress - Do the dew ... back
50339860713_b42a15aaa2_b.jpg

Here, we get another moisture vaporator but not as big as the previous one. 

The pen connects at the side of the cantina also where the Dewback can enjoy it's meal for the day, before hauling cargo and moving Sandtroopers from point A to point B again.

 

 

Bag 17 out of 18
50340549251_9443c09f3d_b.jpg

This is the penultimate bag which includes parts for 1 of the 2 extra buildings modelled after the typical style of Tatooine buildings.

Random Jawa included. There must be at least a few scrappers in the landscape of Tatooine so why not Jawa, right? Personally, not a big deal with me-- However, what episode VII taught me is that everyone could be a scrapper. Having this Jawa in the set is just convenient.
50339860573_5d11a53f08_b.jpg

 

This one-room abode could fit any alien you wish to shelter. The roofs can be easily detached too for easier access to the interior.
50340549151_91e4746147_b.jpg

And just like anything in this set, it could be attached to the main building as shown in the picture above. The main building alone is already 52 cm wide and  58 cm deep when opened wide in "L-shape" configuration.

Adding the auxiliary building on the either side extends the structure with additional 24 studs or 19.2 cm length.

 

Bags 18 out of 18

50340704337_0ae5c9d481_b.jpg
Finally, the last bag!

Here is the final building which attaches to the other smaller building.
 

 

Bags #18 Progress - Junk shop

50340549731_b253bb0ea7_z.jpg

This is supposed to be a junk shop, but you could imagine it could be any shop for sundries, merchandise or whatnot. 

 

50339862293_43640195b7_z.jpg

 

When you open the junk shop, it is 24 studs long, but once you connect it to the other building it offset by 1 stud, so it is effectively 23-stud long only.once connected.


 

50340713697_96fe864b2b_b.jpg

 

In total, when you open up this small buildings, and attach them to one another, the total length adds up to 47 studs or 37.6 cm.

Add that to the length of the main building (in "L:-shape" config) and you're looking at a potential  89.6 cm or 95.6 cm length display model. Mind you, we are not even counting the 2 vehicles! 

If you want to stretch it out further, you can fully expand the cantina so that all the booths line up together on one side, with the centre beverage dispenser sticking out in the middle, then attach the 2 other small buildings fully expanded, too -- and you get yourself an oddly long cantina display that is over 1 metre.

This set is deceptively long, and unlike other sets that are showing building facets only with shallow doll house structure and open backs,  75290 Mos Eisley Cantina gives us a full building with an option to be displayed and played with wide open, with extra side builds that you can orient whichever way you like.

I am still figuring out how I can fit the entire set wide open on my table top photography mini studio. For now, the only way I can take picture of the entire set  is to put it all together as compact as possible. 

50340705917_cd3335dbe3_b.jpg

Here is how it look like without the minifigures.

50340705882_f403e1491c_b.jpg

And here is how it looks like with minifigures.

 

 

I had to take this out of my living room so that I can finally get a great top view of the whole MBS. 

50347905692_c02c7a8211_b.jpg

https://www.flickr.com/gp/80720650@N02/H8tq46

if you can't see the measurement, the total length is about 43.5 inches or 110 cm

Here is another angle:

50347054443_ca52e6cdc1_h.jpg

https://www.flickr.com/gp/80720650@N02/C02L60

 

Now let's step back a little bit and recap what we have built. We do get the main building with a lobby, 5 booths, 1 bandstand, central beverage dispenser/counter and 1 storage room.

We also get 6 covers for the  booths and bandstand. Then there's also the open roof contraption in the middle that merely serves as the finishing touch.  

Outside, we do get a Dewback pen, 2 moisture vaporators and a staging area for cargo.

There are a lot of things going on here, and yet it looks quite organised.

 

50340705777_c4f96fa39b_b.jpg

 

Add the minifigures and there countless things you can stage in this build.

The most obvious scene to stage immediately and recreate is that fight scene that left Ponda Baba missing an arm.
 

You wish you didn't do that
50340550486_5c3af035fe_b.jpg

 

How about the scene outside when Garindan sneakily followed the most wanted droids?

50340705457_b716d91874_b.jpg

 

Kids can make their own scenarios with their playmates (or parents). It will be countless hours of fun re-imagining the Star Wars story, and creating new ones, too.

 

 

Parts

Now lets dial back a little and focus on the individual parts for the moment.

The biggest piece in this set is none other than the Dewback itself.

 

The print is slightly different. The spots are more widespread on the legs and backside of the new Dewback.

The eyes colour are prominently more orange than before, and the nostrils of the new Dewback looks different.  

 

Old (left) vs New (right)

50340705267_1807e1d812_b.jpg

 

If you look at this angle, the new Dewback appears to be less gentle and has an annoyed look. The old one looks more "relaxed"  and less likely to cause trouble.

50339861568_c731e5d943_z.jpg

 

Turn the Dewback upside down and you'll notice that a hole appeared... on its belly. No, I don't believe it is a belly button, but the older mould does not have this hole. Other than this tiny difference, they are practically the same mould.

 

50340705332_37576e5eea_z.jpg

 

50340550126_2506d664f6_z.jpg

One peculiarity is the removal of the teeth print on the upper jaw of the new Dewback. In order to show this, I have to position the Dewbacks upside-down too.

No one could really notice this difference unless you look at the Dewbacks in this awkward position, so it is a wise decision to remove this print for cost-saving measure, when no-one could really see them anyway.
 

As for the bridle, we don't get the reddish brown one from the old Dewback. Instead, we get this new medium nougat flexible 22L with 2 connector ends. 

50340550051_cddf304a8e_b.jpg

It is not far from the realm of possibilities, that the only reason why we get this weird colour as a Dewback bridle, is that this exact piece is used in another set 31109 Pirate Ship.

 

While there are a handful of exclusive minifigures in this set, the amount of new parts and recolour is severely lacking. It is not a big deal because I don't see people buying this set and using it as parts donor. It only means that there are less exciting elements in this set for parts collectors.

Perhaps the budget for new moulds were mostly allocated to the minifigures so new parts recolour is very minimal in this set.

 

There are parts that are not new but could be considered uncommon such as the following:

  • 27965: Zipline, 22L with 2 Connectors - Flexible - Medium Dark Flesh -- only appeared in set 31109 this year, as mentioned above
  • 34816: Brick Special 1 x 2 with Vertical Closed Handle on Edge - Dark Tan -- fairly uncommon as it just appeared once in another Star Wars set.
  • 6314982 looks exactly like the previous element 6289818 but it is a different element number. Not sure what has changed 

 

Other than the new moulds from minifigure parts, the following are new parts/element that I have identified:

  • 37352: Brick Curved 1 x 2 x 1 No Studs - Reddish Brown (used as booth chair back rests)
  • 6314440 -  Hose, Rigid 3mm D. 43L?/ 34.5cm? -- really no clue if this is new but if my measurement is correct, this hose size is different from what is out there currently (used as railing for the  centre counter)
  • 6314069: Cloth, tattered with holes (small building shade)

Let me know if I have missed any. I will be happy to update this list.

 

Hello Greedo
50340550406_bd21106ca3_b.jpg

 

 

Conclusion

If I would let my personal bias get the best of me, I would rate this set perfect, simply because I really have fond memories about this particular scene in the very first Star Wars movie. But of course, I am better than that, so objectively let's see the positive and negative critiques and weigh in the verdict.

 

Pros

  • A playset that is screaming out loud "play me! play me!", even if the suggested age is 18+
  • Equally good as display
  • A full structure that has respectable depth and breadth, not a skinny "open dollhouse" facade
  • Extra Tatooine buildings add extra flavour on story crafting.
  • Detailed interior and exterior
  • Comes with 2 vehicles 
  • Could be displayed fully wide open, reaching over 1 metre in length

Cons

  • Could have had taller side buildings, as not all structures in Mos Eisley is that short. 
  • At this price range, the minifigures could have benefited from extra side printing and dual moulding.
  • Missing female patrons, save one rat-bat girl called Kabe 

 

I am ignoring the conscious decision made by the designers to add the seat ejector play feature on the wrong booth. It is good that it is there only because kids could play them if they wanted to. As adults, there is no harm if located anywhere.  You can totally ignore this if it bothers you. Seriously, there are more pressing matters than accurate re-creation of the Han and Greedo scene.

Take the last negative critique for instance. Some people will find the lack of other female patrons in this LEGO set disturbing as Kabe is the only rose among the thorns. 

Venerable jury, I present you the interview posted in StarWars.com, in which the selection of minifigures to be included was deemed difficult. The article mentioned that the committee based the selection on how important they are to the story, which ones are most iconic, and which one would work best as LEGO minifigures. They also did research on which ones were highest on the LEGO Star Wars fans’ wish list. 

Armed with this information, it makes me wonder -- Is Labria really that high in the wishlist? Come on LEGO. No Snaggletooth, for real? Also, even if the Tonika sister's appearance is minor, the twin sisters were present in the background during the conversation of Han, Chewie, Obi-Wan and Luke. Aren’t they relatively easy to make as minifigures? Wuher even tried to hit on one of the sisters at the beginning of the Cantina scene. Isn’t that more important to the story than just the split second appearance of a Jawa? No?

On the flipside, here is the juicy part. The problem why we are not getting any Tonika sisters minifigure is probably the same reason why Hasbro has not done anything about these 2 female patrons. One of the actresses who portrayed them did not sign (or was not able to sign) a contract about their likeness or any sort of royalty for Star Wars merchandise such as toys. Another story is that during production of Star Wars, the nicknames given to the sisters were allegedly “Star ******”  (sounds very close to “wars”) and legend has it that GL (and by extension, Disney) allegedly did not want anything to do with them because of that. You can read more about this decade old discussion on the internet, so move along, move along. I know, it is such a bummer whatever the reason is.

There are over 60 aliens and humans present in this quintessential cantina scene; this set does not even cover half of the patrons and by-standers. While the existence of this set gives the spotlight on more prominent side characters, it also means that more alien species and minor Star Wars characters are yet to be released in the future. We are just scratching the surface, and hopefully it continues in the right direction.

 

Finally, who is this set for?

Without hesitation - I really think this set is meant for all Star Wars fans and not just grown-ups. The 18+ age recommendation is not a strict guideline. I like to think that the age recommendation is there to testify the new commitment of TLG for adult fans, and not to create barriers of entry. MBS is shaping up to be the exact opposite of UCS, One is focused on display set, whereas the other is focused on playsets that one should be playing instead of keeping MISB. Between these two, I am really leaning towards MBS because it is such a fun series to have. I even promised my kids that after I finish this review, we will play this set immediately. I really look forward to playing this set with them soon.

 

Buzzling Cantina

50340705822_2f38e7915a_b.jpg

 

Review summary

Design / Building Experience: 9/10 - Building a compound filled with diverse aliens in the Star Wars universe is pure bliss. Really wish there is at least 1 taller building as a side build.

Playability: 10/10 - MBS, might as well stand for mind-blowing s** ...set. Playset. Then again this is rated 18+ so whether parents will buy this expensive toy for minors, is purely out of their discretion. 

Minifigures:  9/10 - I really wanted to score this higher because in terms of story and screen time, all the minifigures included in this set makes sense. However, at this price point, fans will always desire to get a better value. There are still many unrepresented aliens in the Star Wars universe. Until then, making custom minifigure for other cantina patrons would be necessary to fill this gap. 

Price / Value for money: 8/10 - At 11c per piece, this is very acceptable -  this is better than 75222 and 75098. However, outside Star Wars, similar sets with the same parts count or price tag tends to have better pricing.

Overall: 9/10 - Whether one loathes the badge “Master Builder Series” (MBS) or not, one can’t deny that the force is strong with this one as this playset appeals to a wide array of audience despite the set having the 18+ age suggestion..

 

Full Flickr album could be found here.

 

50339861303_9dfc62cd82_b.jpg

Share this post


Link to post
Share on other sites

Awesome and really in depth review! The pictures are great as well. I feel like this set is what Assault on Hoth tried to be...

Share this post


Link to post
Share on other sites

Thanks for a great review. And yes this is a must have.  Even more that Jabbas palace.

Edited by Henning M.

Share this post


Link to post
Share on other sites

Fantastic detailed review. It would be great to have a Minifig series to add more patrons to the cantina. A couple of questions if you don’t mind.

How big is the set when closed up? Or at least how big is the main building when closed.

Also does Obi Wan’s but connect to it anywhere ?

Edited by Seasider

Share this post


Link to post
Share on other sites
On 9/15/2020 at 12:13 PM, tfcrafter said:

Awesome and really in depth review! The pictures are great as well. I feel like this set is what Assault on Hoth tried to be...

Thanks. Indeed, it was the intent for that set, but it does not have the same appeal. At that time the new badge "MBS" was not created yet although in retrospect, it should be an MBS rather than a UCS.

 

On 9/15/2020 at 1:36 PM, Henning M. said:

Thanks for a great review. And yes this is a must have.  Even more that Jabbas palace.

You're welcome. No doubt, it is a must buy for passionate Star Wars fans.  

 

On 9/15/2020 at 2:15 PM, Seasider said:

Fantastic detailed review. It would be great to have a Minifig series to add more patrons to the cantina. A couple of questions if you don’t mind.

How big is the set when closed up? Or at least how big is the main building when closed.

Also does Obi Wan’s but connect to it anywhere ?

I think, as long as Hasbro has the license to make exclusive action figures, having a Star Wars CMF series is still out of the picture. I don't mind getting small battle packs. It is a great way to steadily build Star Wars collection.

Fully closed end to end from the front side until the back, the main building is  56 studs long. or 44.8 cm long, including protruding storage area  at the back of the cantina, 

Measuring from side to side, 10 studs (Dewback pen)  + 32 (main building) + 6 (side cargo area), that is 48 studs or  38.4 cm wide.
 

Obi Wan's hut is not intended to be connected with the set. In universe, Obi Wan's place is far from the spaceport, although you can easily put them next to each other and it will go together nicely.

Share this post


Link to post
Share on other sites

@makoy thanks for the info so 44x38.4cm for the Cantina.

yes I’m aware that Obi Wans hut is out in the desert somewhere and not Mos Eisley, but the set had a couple of white connectors that people thought might link to this set.

Share this post


Link to post
Share on other sites

Based on the review alone - I'd probably give this a 9/10. Having a number of new alien minifigs is great but they really should have taken the opportunity to upgrade a couple of the Mos Eisley Cantina set stalwarts like Han, Greedo (where's my arm printing TLG!), Sandtroopers etc. I feel Betrayal at Cloud City was better in terms of minifigs in that you got Boba with arm printing, dual-moulded legs for Han etc.

I don't like how this set renders the 2018 version completely obsolete either, given all the figs from that set are exactly the same here and Greedo's ship is virtually identical. At least the 2014 version had Luke's Landspeeder, more Bith, a Dewback with different printing, different Obiwan and Greedo minifigs etc.

Edited by TeufelHund

Share this post


Link to post
Share on other sites
6 minutes ago, Seasider said:

@makoy thanks for the info so 44x38.4cm for the Cantina.

yes I’m aware that Obi Wans hut is out in the desert somewhere and not Mos Eisley, but the set had a couple of white connectors that people thought might link to this set.

Yup, and I have to be crystal clear.. that alone is the measurement of the main building alone.

I also wonder why people keep on asking that question. I guess Harry Potter spoilt them into thinking similar looking structures could easily connect to one another.

Also, while I am at HP, there is no surprise inside, like the one they did in Diagon Alley. Yes, I blame HP for  all these unrealistic expectations. LOL.

Share this post


Link to post
Share on other sites

Review: 11/10. This is possibly the best review I've ever read. The photos of the minifigs cover all necessary angles. The layout of the pieces per bag is really useful. Excellent photography throughout. The words are descriptive enough without being an overly long essay. Thanks!

And what a great set.

Share this post


Link to post
Share on other sites
24 minutes ago, TeufelHund said:

Based on the review alone - I'd probably give this a 9/10. Having a number of new alien minifigs is great but they really should have taken the opportunity to upgrade a couple of the Mos Eisley Cantina set stalwarts like Han, Greedo (where's my arm printing TLG!), Sandtroopers etc. I feel Betrayal at Cloud City was better in terms of minifigs in that you got Boba with arm printing, dual-moulded legs for Han etc.

I don't like how this set renders the 2018 version completely obsolete either, given all the figs from that set are exactly the same here and Greedo's ship is virtually identical. At least the 2014 version had Luke's Landspeeder, more Bith, a Dewback with different printing, different Obiwan and Greedo minifigs etc.

I don't understand the 1 step forward, 2 steps back approach on the minifigures either. By right we should be getting  dual moulded minifigures at this price range, and more side printing. I hope I made this complaint obvious in my writing. Really wish TLG is not holding back about minifigure design. I am still thanking for the new aliens though.

I got the 2018 version on clearance. I do remember getting that set because I want to get Wuher for my MOC as I did a lot of custom minifigures many years ago, too -- and I wanted an official on. So it was more or less an impulse buy. I know it does not help that there are a lot of repeats, but TLG is playing it safe by assuming the buyers of this set don't have the older versions of the Cantina.

 

7 minutes ago, MAB said:

Review: 11/10. This is possibly the best review I've ever read. The photos of the minifigs cover all necessary angles. The layout of the pieces per bag is really useful. Excellent photography throughout. The words are descriptive enough without being an overly long essay. Thanks!

And what a great set.

Thanks MAB.

Cheers!

Share this post


Link to post
Share on other sites

wow amazing review as usual, very detailed, fantastic pics

frankly, i cannot afford it, for that budget i would buy another set

And anyway, i still have Starbrick's B-bomber to build, so i guess it will cost a lot of money, i'm saving for this one

but in the future, I love to build just the counter with the minifigs and just 1 booth with Han and Greedo, I guess it would be that expensive just for that (maybe a bit for the minifigs)

with the spaceport, the diorama would be totally crazy

https://rebrickable.com/mocs/MOC-41406/ZeRadman/mos-eisley-spaceport-from-a-new-hope-1977

Share this post


Link to post
Share on other sites

Awesome review. They really delivered on releasing the definitive cantina set while also raising the bar for future MBS releases. Would love to see Jabba's Palace receive the same treatment one day.

Just one question - are the new molds for Garindan, Labria and Ponda Baba made from rubber or the normal hard plastic?

Share this post


Link to post
Share on other sites
24 minutes ago, macaron35 said:

wow amazing review as usual, very detailed, fantastic pics



Thanks. Quality review is very important :)

16 minutes ago, wesker said:

Awesome review. They really delivered on releasing the definitive cantina set while also raising the bar for future MBS releases. Would love to see Jabba's Palace receive the same treatment one day.

Just one question - are the new molds for Garindan, Labria and Ponda Baba made from rubber or the normal hard plastic?

This set the bar really high... pun intended. :)

Ponda Baba's head is using the standard ABS plastic.

Gardidan's long snoot and Labria's horn & ears combo are using the hard rubbery material similar to Yoda's head.

Share this post


Link to post
Share on other sites

Great review! What I don't like about this set, are the extra buildings and the white speeder. Also, 3, maybe 4 figures. Taking in consideration, this is a display set, they don't bring much to it, only to the cost.

Everything else is perfect. I'm really thinking of buying't.   

Edited by Citromon

Share this post


Link to post
Share on other sites
27 minutes ago, Citromon said:

Great review! What I don't like about this set, are the extra buildings and the white speeder. Also, 3, maybe 4 figures. Taking in consideration, this is a display set, then don't bring much to it, only to the cost.

Everything else is perfect. I'm really thinking of buying't.   

Agree that in one way or another, the set could be cheaper if the extra building is not added, and only 1 speeder is added.

14 minutes ago, Seasider said:

Another question. Once the cantina is closed can it easily be picked up? Or does it try to break apart ?

I just moved it a moment ago. It did not feel breaking apart. It feels robust enough to be carried around without worrying things will break. If anything to watch out for, I would say it's wiser to hold it near the corners, or edge to edge. Avoid touching the centre underneath, because it is not reinforced in the middle. Other than that,  suffice to say-- it is strong.

Share this post


Link to post
Share on other sites

Thanks just wondered about if it would easily transfer from a building area to a display shelf.

such a great set, just need to check my bank balance, it’s been an expensive Lego year for me

Share this post


Link to post
Share on other sites

Great review and amazing set!!! Finally we get a location set that is perfect for play and also looks great on display. The last time we got something that checked both boxes was probably the 2013 Ewok village.

This set makes up for the god awful cloud city set from 2018. I don't think there's a single thing I don't like about this set, other than the lack of flooring when it's opened.

Share this post


Link to post
Share on other sites

How clear can you see the booths from above, if not open the cantina itself? Maybe only by removing the center part. 

Share this post


Link to post
Share on other sites
45 minutes ago, LEGODrongo01 said:

Great review and amazing set!!! Finally we get a location set that is perfect for play and also looks great on display. The last time we got something that checked both boxes was probably the 2013 Ewok village.

This set makes up for the god awful cloud city set from 2018. I don't think there's a single thing I don't like about this set, other than the lack of flooring when it's opened.

Ahh... indeed. Ewok Village. It was a great set. I am not going to call Cloud City 'awful', but the location itself is not particularly friendly for display. I mean, it is basically a circular dish platter. How can it look any better? 

Hope to see more high calibre design for MBS :) 

18 minutes ago, Citromon said:

How clear can you see the booths from above, if not open the cantina itself? Maybe only by removing the center part. 

MBV_5523

 

Share this post


Link to post
Share on other sites

That's great. Thank you! I hope this set will be available for the next 2 years. I just bought the new AT-AT and the 75257 Millennium Falcon, and added to my shop list Lamborghini Sian from Technic, so unfortunately won't be able to buy this set, this year.    

Edited by Citromon

Share this post


Link to post
Share on other sites

Excellent review Makoy! I think this is everything we could ask for in a MBS set. A good line up of figures and a good main build with some interesting side builds. Hopefully this sets a new precedent for future MBS builds.

Share this post


Link to post
Share on other sites

Great review, makoy! This set is out of my budget, but I'll not hesitate to buy it at a significant discount ;)

Share this post


Link to post
Share on other sites

Thank you for this review!  I was pretty sure I would get the set but I wanted to see a review first.  

I love the build, but there are a few slightly disappointing things with the figures.  The lack arm printing on Greedo is something that I agree is needed, and not including a hair piece for Ben is a bit annoying as well.  The selection I think is mostly okay, Snaggletooth and BoShek I think are two that I would've definitely wanted, and perhaps the Duros as well (especially since they've already done 2-3 Duros characters in the past and they don't need any new mold), but I don't think there's any figures that I would most definitely want to remove.

The size/value for money seems good, it seems quite a bit bigger than Cloud City which I felt was worth the price, and I might pick it up early then re-sell the Yoda saber to make a bit of money back.

Edited by Kit Figsto

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.