ColletArrow Posted October 2, 2020 These are some jaw-droppingly beautifully modelled coaches, presented by some very clean renders! They look perfect with the loco, awesome work. Share this post Link to post Share on other sites
zephyr1934 Posted October 3, 2020 On 10/2/2020 at 8:31 AM, dtomsen said: The doors can be removed and repositioned as open: Brilliant! On 10/2/2020 at 8:31 AM, dtomsen said: Toilet And it is even to scale Share this post Link to post Share on other sites
dtomsen Posted October 14, 2020 (edited) A bit more testing... The Litra B passenger wagon do handle R40 curves and R40 switches.....but Houston, we got a problem with the lever Another test video:2 x PF L-motors, 20:12 upgearing2 x BuWizz 2.0 Maximum normal speed (7,2v), forward The weight of the locomotive alone is approx. 1.040g and each wagon is approx. 900g, so the total weight of the train set in the video is close to 5 kg. Edited June 7, 2022 by dtomsen Share this post Link to post Share on other sites
dtomsen Posted October 15, 2020 (edited) Getting the hang of how luminous colors and intensity work in Stud.io. Night time. Edited June 7, 2022 by dtomsen Share this post Link to post Share on other sites
KAISER81 Posted February 6, 2021 Hallo! Weiß jemand von euch wie ich die Bauanleitung bekomme? Ich suche das schon ne ganze Weile.... Aber leider ohne Erfolg! Vielen Dank im voraus Am 30.7.2020 um 23:18 sagte dtomsen: Alle Renderings wurden mit dem Dunkelroten 1 x 2-Stein mit Gittersteuerung, den ich nachträglich verwendet, wenn ich gewusst wurde, dass das Teil in dieser Farbe ist . Share this post Link to post Share on other sites
dtomsen Posted February 7, 2021 6 hours ago, KAISER81 said: Hallo! Weiß jemand von euch wie ich die Bauanleitung bekomme? Ich suche das schon ne ganze Weile.... Aber leider ohne Erfolg! Vielen Dank im voraus Normalerweise stelle ich meine neuen Modelle aus, bevor ich die kostenlose Bauanleitungen online veröffentliche. Mit Covid-19 hat es sehr lange Aussichten. Ich weiß einfach nicht wann. Vielleicht vor Jahresende. Vielleicht überhaupt nicht 🤷♂️ Share this post Link to post Share on other sites
dtomsen Posted February 14, 2021 (edited) All my passenger wagons together: Edited June 7, 2022 by dtomsen Share this post Link to post Share on other sites
zephyr1934 Posted February 14, 2021 One big happy family! And it's all good Share this post Link to post Share on other sites
dtomsen Posted March 11, 2021 (edited) Irl (with my old roof design) Edited June 7, 2022 by dtomsen Share this post Link to post Share on other sites
dtomsen Posted June 7, 2022 (edited) All renders for the passenger wagons updated with new roof design and other incremental improvements Building technique borrowed from Farouq who borrowed from raised who borrowed from UrbanErwin...the one to the right was used: Taperede roof ends by me: Edited June 7, 2022 by dtomsen Share this post Link to post Share on other sites
dtomsen Posted June 8, 2022 (edited) One can dream A more correct composite windscreen with the old Slope 65 2 x 2 x 2 without Bottom Tube (#3678a) and the new Wedge Sloped 65° 2 x 2 x 2 Corner (#78886) if the latter becomes available in Trans-Clear too. Edited June 8, 2022 by dtomsen Share this post Link to post Share on other sites
zephyr1934 Posted June 8, 2022 That's some insane SNOT you've got going on there Share this post Link to post Share on other sites
Toastie Posted June 8, 2022 And it is an insanely beautiful MOC - wow. I can hardly believe what I see. All the best, Thorsten Share this post Link to post Share on other sites
ivanlan9 Posted June 28, 2022 Thorsten's right: that's one insanely gorgeous engine. I'm very jealous! Share this post Link to post Share on other sites
Sérgio Posted June 29, 2022 On 08/06/2022 at 09:43, dtomsen said: Alguém pode sonhar Um pára-brisas composto mais correto com o antigo Slope 65 2 x 2 x 2 sem Bottom Tube (#3678a) e o novo Wedge Sloped 65° 2 x 2 x 2 Corner (#78886) se este também estiver disponível em Trans-Clear. What a gorgeous locomotive!! Share this post Link to post Share on other sites
bogieman Posted June 29, 2022 Agree with all, that wedge slope in trans-clear will be a great addition if it's released. Share this post Link to post Share on other sites
dtomsen Posted October 26, 2022 (edited) The train on our LTC layout at the Danish Model Railroad Union event Modeltog for alle last weekend: Edited October 26, 2022 by dtomsen Share this post Link to post Share on other sites
Younge Posted October 29, 2022 On 10/27/2022 at 8:42 AM, dtomsen said: The train on our LTC layout at the Danish Model Railroad Union event Modeltog for alle last weekend: Do you still use that hockey puck piece (47576) as the middle wheels in your bogeys for the engine? Share this post Link to post Share on other sites
dtomsen Posted October 29, 2022 (edited) 7 hours ago, Younge said: Do you still use that hockey puck piece (47576) as the middle wheels in your bogeys for the engine? Yeah, I sure do 🙂 Edited October 29, 2022 by dtomsen Share this post Link to post Share on other sites
Darkkostas25 Posted November 5, 2022 Wow dude you made really great Loco, i LOVE angled parts and the you made some tuts for rufs Share this post Link to post Share on other sites
