42113 Reconstruction Guide

[R0Sch]

Still not done but I prefer to take my time and do it properly.

[Carrera124]

@Ngoc Nguyen

Would it be possible that you share the scanned pics instead of a pdf file?

In this case, I'd try to trim and rotate the images, and then make a pdf of them.

[Ngoc Nguyen]

Just now, Carrera124 said:

@Ngoc Nguyen

Would it be possible that you share the scanned pics instead of a pdf file?

In this case, I'd try to trim and rotate the images, and then make a pdf of them.

I dont have the scanned pics myself. The photocopy shop only gave me the pdf file.

You can download the file, find some free online converter that turns PDF into JPEG pages, and split the pages yourself.

[efferman]

First a big thank to @PicnicBasketSam for the LXF which was the basement for this .io

Panel 50 and 51 are rough replacements made by CAD.

The dumb battery box is replaced by the C+ battbox, but the environment is not fitted yet to the c+ box.

the .io files can be found here

 

Edit:

Rotorblade fakes added

C+ hub powerswitch added

Power function version added

Edited July 23, 2020 by efferman

[Carrera124]

13 minutes ago, Ngoc Nguyen said:

I dont have the scanned pics myself. The photocopy shop only gave me the pdf file.

You can download the file, find some free online converter that turns PDF into JPEG pages, and split the pages yourself.

Thanks, I will try this.

But as mentioned before - could you provide a single scan of page 174? Because it is folded in the PDF file.

[iamcuong]

9 hours ago, R0Sch said:

Still not done but I prefer to take my time and do it properly.

Woo. I am waiting your motorizes. I could be very fun. But where you put the battery box?
Hope you finish it as soon as possible.
 

[JaBaCaDaBra]

3 hours ago, efferman said:

Rotorblade fakes added

How about these?

https://www.bricklink.com/v2/catalog/catalogitem.page?P=99013pb01&name=Technic, Rotor Blade Large Bent with 3L Liftarm Thick and Black Rubber Tip&category=[Technic]#T=S&C=85&O={"color":"85","ss":"NL","rpp":"500","iconly":0}

[efferman]

24 minutes ago, JaBaCaDaBra said:

How about these?

much to long

btw, a colour swap to make it buildable with actual parts.

.io files

[JaBaCaDaBra]

Just now, efferman said:

btw, a colour swap to make it buildable with actual parts.

Add black stripes just before the end of the tips and it starts looking quite good.

[HRU_Bricks]

2 minutes ago, efferman said:

much to long

btw, a colour swap to make it buildable with actual parts.

 

.io files

Thanks Efferman. The PF conversion is nice solution

[Siegfried]

You're a legend. Thanks very much. I'll have to see how close I am to making this....

[efferman]

2 minutes ago, JaBaCaDaBra said:

Add black stripes just before the end of the tips and it starts looking quite good.

at the Rotors?

Just now, HRU_Bricks said:

Thanks Efferman. The PF conversion is nice solution

thanks

Just now, Siegfried said:

You're a legend. Thanks very much. I'll have to see how close I am to making this....

Thanks

[JaBaCaDaBra]

11 minutes ago, efferman said:

at the Rotors

yep

[login]

32 minutes ago, efferman said:

a colour swap to make it buildable with actual parts.

Thank you for doing that. By the way, I don't know if that's just my screen making that but I think the lime green on that aircraft looks like unpainted anti-corrosive coating. Which, I think, is kinda funny and awesome.

Edited July 23, 2020 by login

[efferman]

Just now, login said:

like unpainted anti-corrosive coating.

Suchoi is using this paint too?

[login]

1 minute ago, efferman said:

Suchoi is using this paint too?

Well spotted, that plane indeed looks like a Sukhoi (and the comments on stackexchange mention that, which I didn't notice). I guess they use it, it must be something really very common in the industry.

Edited July 23, 2020 by login

[JunkstyleGio]

Good work everbody.

@efferman I like the colorswap a lot!

 

[BrickMusher]

Thx for the pdf. I highly appreciate that!!!

 

Any chance for a scan of an unused stickersheet? Would be the topping on the cake

 

 

[merman]

The least TLG can do is make the parts and stickersheet available for separate purchase...

[JaBaCaDaBra]

2 minutes ago, merman said:

The least TLG can do is make the parts and stickersheet available for separate purchase...

Since they allready molded a load of parts these will appear anyway in B&P
Stickersheet... maybe.
Batteryholder will appear for sure in the Lego Shop at powerfunctions/up. (for a price)

[AVCampos]

Elements and battery box, besides B&P, will surely become available also in other sets.

[JunkstyleGio]

With asteroid lightsetting in Stud.io you get a better result on the lime green parts

[Ngoc Nguyen]

@efferman The blades in the model are facing the wrong way. At the moment they are facing outward. They should face inward instead.

[Ngoc Nguyen]

In the original instruction file, page 174 is folded and doesnt show the building step. Furthermore, page 321 is missing.

Sorry that it took several days to remedy this. I wanted to have those pages scanned by the same photocopy shop, so that they will have the same dimensions and composition as other pages. That will make following the instruction more seamless.

This is the new file: http://www.mediafire.com/file/k4nu591ygsd7tn5/42113_Instruction.pdf/file

@BusterHaus @Carrera124 There you go.

Edited July 25, 2020 by Ngoc Nguyen

[efferman]

should i put this in a 42113 modding thread?