Sign in to follow this  
Agent Kallus

Wishlist Wave Mocs (Newly Updated)

Recommended Posts

Posted (edited)

Following on from @Mandalorianknight 's lead I decided to digitally MOC up some sets from my ideal wave. So far I've  made 2 regular sets, 3 battle pack and 6 Mircofighters (2 dual packs and 2 individual ones), but I do plan on making more (in fact I'm already part through making way a Kamino set) and updating this thread.

50027643762_077166303b_z.jpg

50027382751_8738b04a0c_z.jpg

Here as in all these, there is no printing, I don't have the know how to do it properly in LDD so I though it was better to leave it blank rather try and find something vaguely close in LDD's print library.

50027382771_f300f807b8_z.jpg

50027643792_441d42ed89_z.jpg

I'd have rathered Boga's mixel joints be green but lego don't seen to want to recolour them so... ( Boga is also the only one of these mircofighters without studshooters)

 

50027382811_e5def76b14_z.jpg50027382846_25f5547465_z.jpg

It's real shame lego hasn't really made many rogue ones sets after it's dedicated waves, hopefully the Cassian Andor Show will bring us some cool sets.50026843568_c2f9703f57_z.jpg

50027643722_b4127d02f0_z.jpg

Now I couldn't get the cockpit section to rotate at this scale, but you can remove and reattach it in 3 different postions.

50026843708_442dff80a3_z.jpg

50026843733_a43f6aef0b_z.jpg

For this battlepack I wasn't sure wheter I wanted 2 Stormies and 1 Shore Trooper or vice versa 

50027643887_6fb5fba546_z.jpg

50026843758_83da1a82e4_z.jpg

I think the built here is probaly a bit big for a battlepack, I built the Vixus and then felt like it needed more some I made the Umbaran Turret, in hindsight the Vixus probably would have been enought of a built on it's own, but I liked the Turret so I kept it (Also note the the Umbaran would have a new part for his helmet and would also have dual molded legs. he does have dual molded legs in the picture but LDD messed them up)

 50026843773_8fc60e1900_z.jpg

I felt like this one only needed the one picture cause it's a simple idea. Sadly none of these figs have the right head part, Figrin D'an would have the existing Bith head (which I couldn't find on LDD) Momaw Nadon would get the existing Ithorian head part (which I couldn't find on LDD) , Muftak would get a new part simailar to the existing Talz part I've used as a stand in but without the chief's extras, and Kabe would get a new Chandra-Fan  head piece.

50026843813_f78a5bc08d_z.jpg

50027382991_78358a1700_z.jpg

Mass Ameda would get a new 'hair' part (I've used Shaak Ti's as a stand in) that would fit with his robes and shoulder pads.

50027383016_20c8f88189_z.jpg50026870793_58ef655d86_z.jpg

 

I feel like the proportions on this one are a little off, but none the less I like it, again LDD has messed up the dual molded legs.

These MOCs are more representations of set's I'd like lego to make rather than perfect versions of whatever they're depicting. and I do feel like I could've done some of them a little better if I put more time in, but I'm happy with them. I'm also not sure if 2 pictures is enough, I feel like any more and It'd be overkill, but on the other hand, these are 3d models and it can be hard to show everything in 2 pictures.
 

 

Edit: I hoped both pictures, would fit on one line, clearly they're too big for that, and also everything is a hyperlink and that's not intentional, oh well I think I know what I did wrong, so I know what not to do next time.

Edited by Agent Kallus

Share this post


Link to post
Share on other sites

These are all pretty good, but the TIE just takes it all up a notch, it looks amazing!

I'm glad to see this style catching on. I also like the boga v wheel bike, and of course the cantina pack!

Share this post


Link to post
Share on other sites

I love the B-wing, I'd almost forgotten it appeared in that colour scheme. I might have to MOC a full size one after seeing yours!

Share this post


Link to post
Share on other sites

The Rogue One & Umbaran battle packs would have been the highlight for me, but I don't think they will ever happen. Shame, you have great ideas here!

Share this post


Link to post
Share on other sites

The Razor Crest is marvellous and I intend to rip it off immediately to add to my desk at work. I suspect its a shade too big for an official microfighter though?

Share this post


Link to post
Share on other sites
Posted (edited)

Thanks for the kind words, it's an honour to have this thread featured as well. I've got some more ready so I'll continue the wave, this time with descriptions (which I may retroactively give to the 'sets' in the first post as well).

50035167441_7e6ca952d9.jpg50035169426_034c0365ee.jpg

 

???12 Saw's Gerrera's Hideout.
Price: ?? (I wanna say £40 but sadly I think lego would charge more than that.)
Parts: 362

Recreate star wars scenes with the '???12 Saw's Gerrera's Hideout' playset, which features 3 Rooms and a Brickbuilt Bor Gullet. This 362 part building set comes with 5 lego minifigures : Saw Gerrera ( He would have 2 new parts, for his armour and his hair, also I really wasn't sure what colour to use for his armour, originally I was gonna go with green, but then on rerwatching some rogue one clips I wanted to go with grey, in the end I went with blue afer looking at some stills from the film but I'm still not sure) Jyn Erso ( She would also get a new hair mould) Bohdi Rook, Beezer Fortuna (He would reuse Bib's 'hair' mould but I could not find it on LDD) and a partisan (The one with the scout trooper Helmet, I couldn't find a name for him(?)). You can slide open the door to the prison/torture area, You can move Bor Gullet's Tentacles and you replace Bohdi's head with a sack so The partisan's can 'capture' him (Okay, this set is kinda lacking in ply features). ( Also Note that the window, Bor Gullet's Eyes and Dejarik board would all be printed. I will admit I feel like I cheated here as I've colourd Bor Gullet in Sand Red which is a discountinued colour but none of the colour's in Lego's current pallette were close enough (to the colour of Bor Gullet) from my liking and who knows maybe lego will bring sand red back, after all they brought teal back)

50034531543_acfbcb486e.jpg

50035333462_f55be92961.jpg

???17 Kamino Clash
Price: ?? (I wanna say £70 but sadly I think lego would charge more than that.)
Parts: 993

Arrive on the ocean world of Kamino with '???17 Kamino Clash', this set features a large Landing pad, a Tipoca City entrance and Jango Fett's Slave one ( Though I can't take much credit for the Slave one Design as is really just a copy of Boba's one from the Cloud City set with a few modifications, such as the abilty to fit baby Boba inside the base of the ship). You can land Slave One on the landing pad and head into Tipoca City, the City entrance has slding doors and is packed with interior details including: a hanging chair, a clone dinner table and the DNA tower from the clone wars and not much else. Reenact scenes from Attack of the Clones whilst remembering that in the real world lego has only made one non-Geonosis AotC set since 2002. This fun-packed set comes with 6 exciting minifigures: Obi-Wan Kenobi (with both hair and hood), Jango Fett ( With both hair and Helmet, you might notice a trend here), Taun We (who would have a new head mould), a Phase one Clone Trooper ( Also with both hair and Helmet) and a Clone in the red uniform (this one). Combine this set with ???17 Kamino Clash for more Kamino fun.

50035333497_e5d948157b.jpg

50035333537_25b923d4fe.jpg

???16 Kamino Invasion
Price: ?? (I wanna say £70 but sadly I think lego would charge more than that.)
Parts: 1016

Introducing ???16 Kamino Invasion, with this new Clone Wars set you Invade Kamino with a Trident-class assault ship. The main build of this set is the Trident-class assault ship which is built from 684 bricks and features 4 movable tentacles, adjustable engine flaps and a compartment that can slide in and out to allow Ventress and the Aqua droids to fit in the ship (of all the things I've built for this little project, the Trident-class assault ship was the most difficult and also the thing I'm most pleased with). This set also features a Kamino side build, with a clone barracks area with 2 slide out beds (there's supposed to be a ladder up to the beds but I forgot to put in :facepalm:) . This set can combine with set ???17 Kamino Clash to create a bigger Kamino playset. The following Minifigs and characters are included Shaak Ti, Asajj Ventress, Arc Trooper Blitz, 99, a Phase one Clone trooper and 2 Aqua droid (who might need new parts).

50034531733_9ec28f095e.jpg

Here's a picture of the 2 kamino sets combined.

On 6/21/2020 at 12:51 PM, Redroe said:

The Razor Crest is marvellous and I intend to rip it off immediately to add to my desk at work. I suspect its a shade too big for an official microfighter though?

You're probably right about it being a bit big for a mircofighter.. oh well. I'm sure you'd be able to reverse engineer it, but if you want more pictures, I'd be happy to oblige. If you do built it in the brick could you put a picture of it in this thread if it's not any trouble. I will admit that with these MOCs I haven't checked if all the parts come in the right colours, but that shouldn't be a problem  for something grey like the Razor Crest.

On 6/21/2020 at 3:49 AM, Mandalorianknight said:

These are all pretty good, but the TIE just takes it all up a notch, it looks amazing!

I'm glad to see this style catching on. I also like the boga v wheel bike, and of course the cantina pack!

Thanks, I'm glad you devised this style. I'm looking forward to seeing the rest of your Mandalore Wave.

 

Edited by Agent Kallus

Share this post


Link to post
Share on other sites
39 minutes ago, Agent Kallus said:

Thanks, I'm glad you devised this style. I'm looking forward to seeing the rest of your Mandalore Wave.

Thank you! I should have another set with a new design for the NR-N99 tank droid done and uploaded in an hour or so, just working on a side build.

Once again, all the new sets you've designed are great, but then the Trident droid just brings it to 11! Seriously, that thing looks amazing!

Share this post


Link to post
Share on other sites

Here's the next update, only 2 'sets' this time but I've got more in the pipeline. Possible spoilers ahead 

50079736586_d4130f2321_c.jpg

50079988492_723d9e9402_c.jpg

???10 New Republic Prison Escape
Price: £25
Parts: 243

Bounty Hunting is a complicated profession, whilst working a job with some old pals Mando was betrayed and trapped in a New Republic Prison cell, with the new lego set ???10 'New Republic Prison Escape' you can recreate scenes from the smash hit disney+ show. This exciting building kit features an opening door and includes 6 characters With lego minifigures of the Mandalorian, Mayfeld and Xi'an as well as 2 Republic security droids(1) (Who would include a new K-2SO like mould) and a brickbuilt New republic security droid(2) and mouse droid. (The white background doesn't work too well for this model but I wanted to use the same colour for all of them). This set can also connect to the upcoming  Prison ship control room set for more fun.

50079736751_405970e0af_c.jpg

50079988597_fbd7657601_c.jpg

???15 The Batttle of Dathomir
Price: £80
Parts: 891

Dooku has sent Grevious and his army to Dathomir to wipe out the nightsisters but these witches won't go down without a fight. Build the CIS MTT with a openable droid rack that can hold all 10 included super battle droids and room to store the 2 included staps (I know there weren't any in this episode but there was space in the MTT and it made sense to put them there) and the battle droid driver. The articulated vulture droid can quickly change from flying to walking mode. Help the nightsisters fight back with the hidden cave area, featuring a count dooku wax voodoo doll thing, a boiling liquid pot (the two green studs would go loose in the pot) and a magic orb for Daka to use to raise the dead. Speaking of raising the dead, the final build in this set is a nightsister grave mummy cocoon thingie, which can open to release the mummified nightsister. This set includes 2 minifigures  Asajj Ventress and Old Daka, a grevious figure and an undead nightsiter figure  and 15 droid figures, 10 super battle droids, 2 commando droids, 2 battle droids and a pilot battle droid. The dathomir parts from this set can connect ot the upcoming Nightsister strong hold set.

And here as as bonus is the MTT in Trade Federation colours, and switched out to store B1s rather than B2s. This version is somewhat flimsier (I don't think it's that bad but the CIS one is definitely sturdier, of course it can be hard to tell without building it in the brick) as I made the model with B2s in mind and had to modify the interior to fit a decent number of B1s (18 to be precise), The side areas no longer hold stap, but serves as a space to put their blasters.

50080007222_3d52540f37_c.jpg

I will add descriptions to the first post soon, and maybe resize all the images to match the size used in this post as I like this way better.

  

Edited by Agent Kallus

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.