Jim

[TC18] Technic Small Car Contest - Entry Topic

Recommended Posts

DON'T FORGET TO INCLUDE A PICTURE OF THE CHASSIS BEFORE THE BODYWORK HAS BEEN ADDED.
A BOTTOM CHASSIS PICTURE DOES NOT COUNT AS CHASSIS PICTURE!!

 

TECHNIC SMALL CAR CONTEST - ENTRY TOPIC

CONTEST INFORMATION

More information about the contest can be found in the general discussion topic.

WHAT DO I NEED TO ENTER?

Please take a careful look at the rules before posting in this topic. Each participant is obliged to create a post in this entry topic. Posts need to follow the rules stated below. Posts not following the rules will be disqualified so please read them carefully.

ENTRY POST

The entry post in this topic needs to contain:

  • Entry name
  • One or more images (max 4).  You can have combined pictures (4 in 1) as long as the picture isn't bigger than 1024x1024.
  • At least one image of the chassis, so take a pic where we can see the chassis before you close the bodywork.
  • Embedded video is not mandatory this time
  • Link to your discussion topic

IMPORTANT

This topic should be used for entries only, so commenting is prohibited. Please use the general discussion topic for...well, general discussion on the contest, and individual discussion topics to comment on the individual entries.

Share this post


Link to post
Share on other sites

1. H&C F6

The model was based on a fictional car that my friend built (check the WIP topic)
There is a HOG and a working steering wheel in the cabin, rotating with the wheels. The HOG can be easily removed.

Fiwd6FCYcmM.jpg

The doors, hood at the back and trunk at the front open (there is nothing in trunk, a lot of space is taken up by the steering system). Moves the spoiler, under the hood of a mini oppositional engine with 6 pistons.

d-DTi2pbLC4.jpg

The interior has been worked out. There are cavities on the bottom for attaching the model to the 42098 car carrier.
Length - 35 studs, height - 11 studs, width - 15 studs (without mirrors). Distance between wheels - 19 studs.

j0NaQQhrbvw.jpg

Video:

WIP and discussion topic: https://www.eurobricks.com/forum/index.php?/forums/topic/176644-tc18-hc-f6-in-technic/&tab=comments#comment-3221259

 

Share this post


Link to post
Share on other sites

2. Look ma, no beams!

Model doesn't use any beam (1L is not counted). Everything is built mainly with axles and connectors. It is not based on any real car.

Car features:

  • Steering with steering wheel and HOG steering
  • Openable doors
  • Adjustable rear view mirrors
  • 2 cylinder fake engine, which is connected to rear wheels trough differential
  • Adjustable front seats

800x437.jpg

800x478.jpg

Chassis before closing bodywork ...

800x437.jpg

More pictures and everything else in topic 

 

Share this post


Link to post
Share on other sites

3. Formula 1

405 parts

L40xW15xH11

flat 6 factice motor

steering by hog 

Ik3P6X9.jpg

qhEXwTu.jpg

HGP6MwC.jpg

 

Link to the topic

 

Share this post


Link to post
Share on other sites

4. DARK BULLET

from the future introducing you the DARK BULLET !

this car is a fictional all-roader and not based on any real car

functions:

  1. rear wheel drive with a differential 
  2. Working vr6 fake engine 
  3. hog steering
  4. full independent suspension with a swing arm for each wheel 
  5. ride hight control 
  6. opening (engine/ride hight control system ) cover 

L:28

W:15

H:14(max)-11.5(min)

60C87236-4918-43DD-A67D-F6A92A229B9A

 

8F983217-8B8D-4815-B257-89DB3EE6625E

F0C77F2A-2D0A-4632-BD2B-3C453AF4E4A7

F14381B5-20F7-4EF4-9661-82794EAAC194

 

Share this post


Link to post
Share on other sites

5. Ferrari F355

If you got a bunch of red parts, you obviously need to build your favorite Ferrari.

Features:

  • Steering with the steering wheel and removable HOG;
  • Openable doors;
  • RWD with V8 fake engine;
  • Popup headlights.

HMeLW5h.png

 

R9pOPqf.png

 

OImyWvO.png

 

 

 

Share this post


Link to post
Share on other sites

6. Miniature Muscle car

A blast from the past with the following functions and features:

  • Independent double wishbone suspension in the front
  • Driven solid rear axle
  • Working steering wheel
  • Fake V8 engine
  • 4 speed gearbox
  • Openable doors and hood
  • Foldable roof
  • Detailed engine bay

800x600.jpg

 

800x600.jpg

800x399.jpg

 

 

Edited by Zerobricks

Share this post


Link to post
Share on other sites

7. Mercedes E190

  • Mercedes E190 (w201) with M102 engine
  • Video:
     
  • Topic:  

    9npdzv4dbAM.jpg
  • owy95bdY04Q.jpg
  • LqDsMTr5anw.jpg

 

Chassis is very simple because I started to build from bodywork

mQV1snRc0u4.jpg

Share this post


Link to post
Share on other sites

8. G-Class

Every one know what car it is.

Dimensions:

-Lenght: 37 studs

-Height: 17 studs

-Width: 15 studs

img_20200422_125820.jpg

Functions:

-4x4 drive

-Working 6 cylinders engine

-Openable hood and doors

-Steered front wheels with working steering wheel

-Full suspension

bez_nazwy.jpg

bez_nazwy2.jpg

And photo of chassis:

img_20200425_1459061.jpg

Forum topic:

 

Share this post


Link to post
Share on other sites

10. Targa Turbo V6

It`s united image of old roadsters with suicide doors and angle form.

The model has working steering system with working wheel in saloon and Hog, working engine V6, opening doors, trunk, hood and  has hard parts of roof for rain ( quick removal ).

Dimensions:

- Length: 32 studs, -Height: 12 studs without Hog, -Width: 15 studs without mirrors. 692 parts.

1 image

CwU21g2ok8c.jpg

2 image

3CQrkmjWpOA.jpg

3 image

V0dAtAesFXo.jpg

4 image

UpOV8G2NSfk.jpg

 

Share this post


Link to post
Share on other sites

11. British Classic

Functions include front and rear independent suspension, steering, tilting seats, opening doors and bonnet. Details include engine and interior.

800x599.jpg

800x599.jpg

800x534.jpg

800x599.jpg

Link to discussion topic.

 

Share this post


Link to post
Share on other sites

13. Delorean Time Machine

Car in this small size is very limited to add function. So I focused to add unique function in my car.

After much tought, I select delorean.

Function

Rear wheel drive with differential and 2 cylinder engine

Steering front wheel with steering wheel and HOG

Fold down all 4 wheel at once with Mr.fusion

spring fixed gull wing door

delo1.jpg

delo5.jpg

normal.jpg

flying.jpg

I add two chassis image. one in normal mode, one in flying mode.

https://www.eurobricks.com/forum/index.php?/forums/topic/176654-tc18-delorean/

Share this post


Link to post
Share on other sites

14. Mix of Porsche

Model containing features of different Porsche models

Car features:

- steering system with HOG + positive castor

- openable doors and trunk

- fake 6 cylinder flat engine, connected with differential

IMG_20200429_182249-01

 

IMG_20200429_181718-01

 

PicsArt_04-30-08.44.32-01

 

IMG_20200403_151531-01

 

 

 

 

 

Share this post


Link to post
Share on other sites

15. Retro Roadster

I love old classic cars and decided to make a model in this style. My model was inspired by old Porsche and Jaguars.

Features:

  • Steering with the steering wheel;
  • Openable doors;
  • Openable hood and trunk;
  • Folding roof;
  • Detailed interior and engine layout.

W7C47Pu6YHA.jpg

N-9xHsb1Jm0.jpg

SOJcayr3Mps.jpg

1JSkniGaYT0.jpg

Share this post


Link to post
Share on other sites

16. AMC Pacer Super Dragster

Model of American compact car manufactured in the USA from 1975 to 1979, built in the style of a racing car for drag racing. A quarter mile racing left its mark on the refinement of the stock car - there is a huge V8 with a compressor, a safety cage, larger rear tires, a nitrous cylinder, a fire extinguisher, a trolley to prevent a coup at startup (wheelie bar) and even a brake parachute .
Functional
- V8
- Belt drive to the compressor, generator and water pump from the main shaft
- Rear drive
- Steering via HOG (stylized by a folded parachute)

63A3Wq4Ycew.jpgy-4Ry04r7S0.jpg4N27evAsyQo.jpgQasSQJwwYeA.jpg

 

 

Share this post


Link to post
Share on other sites

17. Monochrome Roadster

A modern classic roadster, styled to be a mix of old and new. Front engined, rear wheel drive with a long bonnet and a short rear overhang.

Features:

Straight Six

Direct linkage steering

Suspension in rear axle

Interior with Centre console

Roll hoops for safety protection

Specs:

Length - 34 studs

Width - 15 studs

Height - 11 studs (Main body 6 studs)

Parts - 611

Photos:

49844986563_486b1986b0_b.jpg49844986553_84f6d9cbe8_b.jpg49845540071_6150e29ee9_b.jpg49844986453_455f86159d_b.jpg

Video:

WIP Thread:

 

Share this post


Link to post
Share on other sites

18. Pullback Racer 42106

I built this race car only out of parts available in LEGO Technic set 42106 so it is alternative model or C-model of this set. Building instructions are available at buildinst.cz

Dimensions:

  • lenght: 34 studs (41 with flames from exhausts)
  • width: 15 studs
  • height: 12 studs

Functions:

  • two modes - pullback and steering
  • pullback motor (can be disabled for steering mode)
  • front axle steering (can be blocked for pullback mode)
  • easily removeable body
  • opening hood

49826616816_3586c6da98_c.jpg

49826933102_81edbaea85_c.jpg

49826616756_e9a1a080d6_c.jpg

49826084073_55c8d5e077_c.jpg

Discussion topic:

 

Share this post


Link to post
Share on other sites

19. Big Block Hotrod

This is my first attempt o make Hotrod in 1:15 scale, and it fits max 15 studs width...

Features:

  • Big V8 working fake engine 
  • Front wheel steering (HOG with black gear at the rear)
  • Front live axle
  • Rear live axle
  • Rear wheel drive
  • Suicide doors

800x600.jpg

800x600.jpg

800x600.jpg

 

Share this post


Link to post
Share on other sites

20. Dune Buggy 2020

One of my first sets was the 8845 Dune Buggy. Since then I've always been intrigued by serious suspension travel. So for this contest I focussed on suspension and built the model I would have wanted if I would still have been a kid. WIP-topic can be found here. Instructions are available on RebrickableMore photos here.

Features:

  • HoG steering
  • Rear wheel drive with differential
  • Fake V8 engine
  • 2 studs ground clearance
  • 2 studs suspension travel all around
  • Double wishbone front suspension
  • Trailing arm rear suspension

960x540.jpg

960x540.jpg

960x540.jpg

960x540.jpg

Share this post


Link to post
Share on other sites

21. Red Sky

Functions:

  • Steering
  • Front and rear suspensions
  • Mini V8 engine
  • Rear wheel drive with differential
  • Detailed interior

49851536941_9ba41f6cd1_b.jpg

49851000473_68044f87d5_b.jpg

49851536976_227917c184_b.jpg

49833286378_5bca626b08_b.jpg

Discussion topic:

 

Share this post


Link to post
Share on other sites

22. Dart

800x600.jpg

800x600.jpg

Functions:

  • Front double wishbone independent pushrod suspension
  • Rear double wishbone independent suspension
  • Steering via HoG
  • Rear wheel drive through differential
  • 2-speed gearbox
  • V8 mini engine
  • 2 easily interchangeable roof styles: convertible & hardtop

800x600.jpg

800x600.jpg

 

Share this post


Link to post
Share on other sites

24. TATRA T87 - "Streamline"

Functions:
- Steering via knob on the back
- opening engine cover
- rear swingarm suspension

Outer dimensions:
L×W×H = 38×15×14 [studs]

Entry post:



800x450.jpg
800x540.jpg
800x422.jpg
800x440.jpg

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.