Robert8

LEGO IDEAS 21326 - Winnie the Pooh

Recommended Posts

5 minutes ago, Falconfan1414 said:

It would appear as if we got our first figure leak. Pooh himself 

Yes just saw it!!! I don’t know what to think. I don’t know Pooh that much. I guess the minifig looks like him but there is something weird... dunno what

7 minutes ago, Robert8 said:

That Winnie the Pooh torso is kind of disturbing...

 

Also, he totally needed middle legs 

Yeah isn’t it. The is something odd but I can’t say what. Can’t wait to see the others! 
how many figs are planned again? ( in the ideas project)

Just looked at it again. To me it looks like the torso is a small tank top of the top of a bathing suit of a lifeguard....that’s what I think it reminds me of...

I know his shirt is lifted a little by his belly, but without the belly it really reminds me of a lifeguard sports bra

Share this post


Link to post
Share on other sites

Hahahaha

It does look like a crop top

 

Maybe Winnie has an Onlyfans or something

Share this post


Link to post
Share on other sites

the head looks fantastic, but I definitely cannot say the same for the torso, also yeah mid-legs would have been better. Very excited to see the rest of the set!

the more I look at it the faker it looks, but I hope its real

Share this post


Link to post
Share on other sites

How sure are we that this is a legit leak and not another toy line, like what happened with Sesame Street? I only ask because this leak came out suspiciously and conveniently close to the set info coming out.

Share this post


Link to post
Share on other sites
Just now, Mattah12 said:

How sure are we that this is a legit leak and not another toy line, like what happened with Sesame Street? I only ask because this leak came out suspiciously and conveniently close to the set info coming out.

  1. The torso print looks legit
  2. As @Foxes Productionz points out, he has minifig-like eyes rather than black dots
  3. Dual-moulded arms with red sleeves and bright light orange arms don‘t exist yet

Therefore, I‘d say it‘s real :sweet: Bring on the rest!

Share this post


Link to post
Share on other sites
2 hours ago, Lego-Freak said:
  1. The torso print looks legit
  2. As @Foxes Productionz points out, he has minifig-like eyes rather than black dots
  3. Dual-moulded arms with red sleeves and bright light orange arms don‘t exist yet

Therefore, I‘d say it‘s real :sweet: Bring on the rest!

Fair enough, commence cautious optimism!

Share this post


Link to post
Share on other sites
3 hours ago, Lego-Freak said:
  1. The torso print looks legit
  2. As @Foxes Productionz points out, he has minifig-like eyes rather than black dots
  3. Dual-moulded arms with red sleeves and bright light orange arms don‘t exist yet

Therefore, I‘d say it‘s real :sweet: Bring on the rest!

Just saw the leak on IG. I loved his new-mold headpiece, but his legs should’ve been shorter like the medium-short minifigure legs assembly introduced in 2018.

Share this post


Link to post
Share on other sites

The Disneyfication vs Classic argument is one thing, but this minifig (think we can assume it’s legit from the dual molded arms) is awful. Megabloks awful.

Share this post


Link to post
Share on other sites

Huzzah, new molds confirmed! I was banking on it after Sesame Street but it's nice to know for sure. I agree that the torso looks a little weird, it looks overshaded to me.

Not sure why so many people are complaining about the length of his shirt though, it doesn't exactly fit him very well to begin with.

latest?cb=20191229203055

Share this post


Link to post
Share on other sites
4 minutes ago, BigGuy4U said:

Not sure why so many people are complaining about the length of his shirt though, it doesn't exactly fit him very well to begin with.

Exactly, it’s a deliberate aspect of the character design. Children love to give their teddies doll clothes, whether they even remotely fit or not :laugh: His rather rotund stature adds to that effect

Share this post


Link to post
Share on other sites
On 1/18/2021 at 10:35 PM, Robert8 said:

Hahahaha

It does look like a crop top

 

Maybe Winnie has an Onlyfans or something

Hahaha

Share this post


Link to post
Share on other sites

The recently leaked bunny head that’s part of the Vidiyo theme could work for Rabbit I think :sweet: Either that or the Bugs Bunny head from the CMF series, depending on whether the facial details are printed or moulded :shrug_oh_well:

Share this post


Link to post
Share on other sites
34 minutes ago, Lego-Freak said:

The recently leaked bunny head that’s part of the Vidiyo theme could work for Rabbit I think :sweet: Either that or the Bugs Bunny head from the CMF series, depending on whether the facial details are printed or moulded :shrug_oh_well:

I doubt it. The vidiyo figure has the pink hair molded on plus they made different molds for Chip & Dale, when they could have easily just printed the details on, so I'm guessing we might get 4 new bunny/rabbit heads this year - VIDIYO bunny girl, Bugs, Lola and Rabbit :tongue:

Share this post


Link to post
Share on other sites
7 minutes ago, Tygurah said:

I doubt it. The vidiyo figure has the pink hair molded on plus they made different molds for Chip & Dale, when they could have easily just printed the details on, so I'm guessing we might get 4 new bunny/rabbit heads this year - VIDIYO bunny girl, Bugs, Lola and Rabbit :tongue:

I thought the pink hair was a separate mould, but upon closer inspection, you’re probably right :blush: 

Share this post


Link to post
Share on other sites

No way Disney would let them use the same mould for Bugs Bunny

Walt Disney would roll over on his grave

Edited by Robert8

Share this post


Link to post
Share on other sites
On 3/2/2020 at 7:53 PM, Gomek said:
On 8/31/2020 at 9:47 PM, 2lazeetomakeaname said:

I can also see them using the molds for bugs bunny and porky pig in this set if the Looney Tunes cmf rumor is true

Naaah. I also think Rabbit is the most likely to be dropped from the figure roster if any are

Share this post


Link to post
Share on other sites

@williejm: If any character from the original submission is omitted, it has to be Eeyore. Or do you want a brick-built Eeyore that doesn‘t even remotely fit with the rest of the characters? :tongue: The only way he could be realised is with a specialised mould à la Hamm

Edited by Lego-Freak

Share this post


Link to post
Share on other sites

If its real, his head looks pretty nice to me actually. But frankly, speaking about torso I was hoping to see something similar to what they did with big yellow bird from sesame street. Some kind of rubber belly would be fun to have and it'd give the figure more round shape which is quite appropriate in this case. 

Share this post


Link to post
Share on other sites
28 minutes ago, BacktoBricks said:

Piglet minifigure just leaked. Looks a little off in the face to me, but it might just be the angle of the photo.

Looks fine to me. Nothing too special but to me it looks like a well made mold and overall figure too

Share this post


Link to post
Share on other sites
43 minutes ago, adwind said:

Looks fine to me. Nothing too special but to me it looks like a well made mold and overall figure too

It's a good figure. I think it's the smile or something, nothing major just something feels a little off. But like I said, I think in person it might look a lot better than at weird camera angles.

Share this post


Link to post
Share on other sites

Yeah something is definitely  off, it could just be the size of the head in relation to the torso, but make the head any bigger and it would look ridiculous (the whole fig is already too big, imo it should have been just a new one piece mold like the statuettes). With that said, I think the head and torso look good enough, however the legs 100% should've been done like dobby's, but pink instead of tan.

Share this post


Link to post
Share on other sites

I think the issue here is just the proportions of the minifig in general that you have to work with. Piglet is basically the same width all around, so the minifigure torso and legs are a bit too wide for him compared to the head. Not really something you can get around without brand new molds for his torso and legs, but it doesn't really bother me. I don't come to Lego expecting minifigs to have 100% proportions to the original characters anyway, the closer you get to that the less it looks like a minifig, and consequentially less like Lego. My only complaint is that his legs should've been the same color as his head and arms, but that's not too difficult of a fix, the Pajama Girl from Series 20 looks like she has legs that are the right color.

Pigletdisney.jpg

Edited by BigGuy4U

Share this post


Link to post
Share on other sites

Hmmm they really look off

Maybe molded bodies like they did with Trolls would have been better

 

But then again, Piglet is a very bizarre looking pig to begin with

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.