Ngoc Nguyen Posted January 29, 2019 (edited) LEGO Technic 42100 “Liebherr R9800 Excavator” Price 449,99€ 4108 parts new control system CONTROL+ 7 motors (CONTROL+) 2 CONTROL+ hubs new parts: Linear Actuator long (12 studs?) big gear wheels dbg (grey) (like in 42095) new liftarm frame 11x7x1 no B-model at the moment Go nuts Edited August 19, 2019 by Ngoc Nguyen Share this post Link to post Share on other sites
agrof Posted January 29, 2019 (edited) This video has better picture quality + some information too: Edited January 29, 2019 by agrof Share this post Link to post Share on other sites
I_Igor Posted January 29, 2019 Honestly set looks great, but price makes me instantly frozen...after recovering I have decided just to buy sprocket wheels and to see 11 x 7 frame... Share this post Link to post Share on other sites
Ngoc Nguyen Posted January 29, 2019 Notice the setup with the pulley wheel running on the large quadrant gear racks. I think this is Markus's creation. Share this post Link to post Share on other sites
RussianGuy Posted January 29, 2019 What about this 11x7 frame, can it be seen on the video? Share this post Link to post Share on other sites
ComMix Posted January 29, 2019 (edited) whoop whoop. Im on Edited January 29, 2019 by ComMix Share this post Link to post Share on other sites
pleegwat Posted January 29, 2019 The bevel gears on the axle to the two rearmost LAs are mirrored. Again. Share this post Link to post Share on other sites
efferman Posted January 29, 2019 Just now, RussianGuy said: What about this 11x7 frame, can it be seen on the video? Under the ladder, behind the Liebherr Sticker Share this post Link to post Share on other sites
Ngoc Nguyen Posted January 29, 2019 Pin with pin hole in yellow 3x13 curved panels in white 5x7 shell panels in white Share this post Link to post Share on other sites
Imanol BB Posted January 29, 2019 I must say i'm impressed, is good to see some new parts which might be game changing like the controlling system with so many channels and those longer (and fantastic) LA's , the price is a bit high but i think is just because of the new controlling system Share this post Link to post Share on other sites
Ngoc Nguyen Posted January 29, 2019 The new frame 7x11 is in white Share this post Link to post Share on other sites
pleegwat Posted January 29, 2019 Seems there is a rudimentary programming system in the app, does this mean they're targeting it at the mindstorms audience as well? Those have always been very expensive sets for the amount of lego in them. Share this post Link to post Share on other sites
Srdjan5033 Posted January 29, 2019 Digging the new pieces, but I don't like it too much where technic is going. It took me years of careful collecting to get the power functions and pneumatic going, and now they just go with the darned PowerUP stuff. I sure hope it has some extension wire pieces and connector hubs as the PF has the convince of daisy chaining both PF and older 9V motors and LEDs. The price is exorbitant to say the least. First the Bugatti and now this. Sure it has 11 motors and 4K pieces, but i hope there are some more entry level models with the new motors. Share this post Link to post Share on other sites
jrx Posted January 29, 2019 (edited) 2 minutes ago, pleegwat said: Seems there is a rudimentary programming system in the app, That's right. It looks similar to Boost programming interface but for adults. Just now, Srdjan5033 said: i hope there are some more entry level models with the new motors The 42099? … but still quite expensive Edited January 29, 2019 by jrx Share this post Link to post Share on other sites
ifilin Posted January 29, 2019 (edited) Sheo built simillar excavator TerexRH400 early. It was on Rebrickable as MOC-1874, but now can't find it. P.S. I've got the instructions for it. Edited January 30, 2019 by ifilin picture Share this post Link to post Share on other sites
Srdjan5033 Posted January 29, 2019 8 minutes ago, jrx said: That's right. It looks similar to Boost programming interface but for adults. The 42099? … but still quite expensive At least 230e for just 958 part ?!! Good god, that is the worst price/part ratio that i have seen so far. Those hubs and joints better be made of stainless steel, custom forged and milled by hand... Share this post Link to post Share on other sites
grum64 Posted January 29, 2019 It’s going to be an expensive Autumn. Share this post Link to post Share on other sites
technicbuilder Posted January 29, 2019 As a mechanic from Excavators i'am verry happy with this one ,and the TLG is pretty early this year with the anoucment from their Flagship for 2019 . I hope the controls works smooth and fine with the new control system . Share this post Link to post Share on other sites
I_Igor Posted January 29, 2019 11 minutes ago, grum64 said: It’s going to be an expensive Autumn. I would rather buy shoes to my wife than spent such amount on Liebherr, despite it is great set IMHO Nice addition to the topic @ifilin Share this post Link to post Share on other sites
technicbuilder Posted January 29, 2019 Just now, I_Igor said: I would rather buy shoes to my wife than spent such amount on Liebherr, despite it is great set IMHO Nice addition to the topic @ifilin My wife has shoes enough Share this post Link to post Share on other sites
kbalage Posted January 29, 2019 45 minutes ago, pleegwat said: Seems there is a rudimentary programming system in the app, does this mean they're targeting it at the mindstorms audience as well? Those have always been very expensive sets for the amount of lego in them. That should be the aim of the whole Powered Up system, to extend the programming and the sensor using ability to all lines not just Boost. The App-Controlled Batmobile also has 3 customizable action buttons with Boost-style commands, I guess this will be the same with different program blocks. Hopefully once the complete system will be introduced there'll be a central app that can control and program every hub. Share this post Link to post Share on other sites
pleegwat Posted January 29, 2019 Just now, kbalage said: Hopefully once the complete system will be introduced there'll be a central app that can control and program every hub. Guess that's for Christmas this year then. Share this post Link to post Share on other sites
jorgeopesi Posted January 29, 2019 I have to look for bad things to say because I do not want to spend that money so... The undercarriage is a little big in scale. A bucket build with pieces would be better I hate this kind of bricks... it is not usefull even for a R9800 excavator. I preffer sets with gearbox, seeing the size of this set is must almost empty inside. The price. I will need 10 more for not loving it... Share this post Link to post Share on other sites
allanp Posted January 29, 2019 To add to my thoughts in the 2019 thread I like that the new frames are white, it's excellent that they are coloured the same as the model. I also notice that the phone is recieving live inclination angle information from the model. You can see it on the phone when it drives up the ramp. So that's cool and a nice authentic touch. Share this post Link to post Share on other sites
Aleh Posted January 29, 2019 MInblowing monster!! Cost my month salary Share this post Link to post Share on other sites
