Recommended Posts

43757528711_44ba932445_b.jpg

REVIEW - 42082 - ROUGH TERRAIN CRANE

29891224738_4fbb6786f4_b.jpg

INTRODUCTION
The biggest set of the second wave of 2018 sets is the Rough Terrain Crane. Actually, it is THE biggest Technic set ever, with 4057 parts, surpassing the 42055 - Bucket Wheel Excavator, which has 3929 parts. This set contains 128 parts more than the BWE. Which immediately raises the question; has TLG purposely made this set bigger, so it has the highest part count ever? The reason I am asking out loud, is that there has been some debate in the Technic Forum about the growing size of the sets, related to the functions. Some say that the part count is intentionally high, without adding significantly more (or better) functionality.

While I do see a trend in sets getting bigger (i.e. higher part count, thus higher price), I don't think that TLG designers are filling their workday finding out ways to add lots of unnecessary parts. I do like to think that the style of building is adapting/evolving to the contemporary standards/requirements. Of course, I don't want to sound too naive, because at the end of the day, it's all 'bout the money. It's all 'bout the dun dun do do do dumb. I don't think it's funny to..... Anyway, why not use this review to dive into this delicate matter.

Before we start I like to point out that I do like big sets. The experience of opening the box and seeing the plethora of parts is overwhelming. On the other hand, with Technic sets getting more and more expensive, I can understand that people stop buying the (bigger) sets. In this review, I simply want to find out if this set could have been made with, let's say, 3000-odd parts while maintaining the same functionality.

Another thing I'd like to address in this review is the use of extra elements (playable items), like a chains, tools etc. There has been some debate about this in the Technic forum, so I like to give you my opinion. 

42802598742_34ab81e0c5_o.png

If you see this icon, you can click the image on the left or right side of the image, to cycle through alternative images.

PICTURES
Pictures can be clicked to view hi-res versions. More pictures can be found in my Flickr album.

DISCLAIMER
This set has been provided by the CEE Team of TLG. It's not my goal to promote this set. It's my goal to give you an honest opinion about it. Therefore, the opinion in this review is my own and is in no way linked to TLG.

SET INFORMATION
Number: 42082
Title: Rough Terrain Crane
Theme: Technic
Released: 2018
Part Count: 4.057
Box Weight: > 5kg (I forgot to weigh the box, because my kitchen scale couldn't handle it.)
Box Dimensions: 57,5 cm x 47,2 cm x 16,5 cm
Set Price (RRP): £  / $ 299.99 / € 229,99
Price per Part: £  / $ 0.074 / € 0,056
Links: Brickset, Bricklink

So, with an RRP of 229 euro, the price per part comes down to 5,6 cent per part, which is a steal. It's even slightly less than the BWE (5,9 cents per part). This makes it one of the cheapest Technic sets in terms of price per part. Let's compare some stats with previous flagships.

COMPARISON WITH OLDER SETS

  • 2011 - 8110 - Unimog - 189 euro,  2048 parts, 9,3 cent per part.
  • 2012 - 9398 - 4x4 Crawler - 169 euro, 1327 parts, 12,8 cent per part.
  • 2013 - 42009 - Mobile Crane Mk II - 199 euro, 2606 parts, 7,7 cent per part.
  • 2014 - 42030 - Volvo L350F - 219 euro, 1636 parts, 13,4 cent per part.
  • 2015 - 42043 - Arocs - 199 euro, 2793 parts, which is 7,2 cent per part.
  • 2016 - 42055 - BWE - 229 euro, 3929 parts, 5,9 cents per part.
  • 2017 - 42070 - All Terrain Truck - 249 euro, 1862 parts, 13,4 cent per part.
  • 2018 - 42082 - Rough Terrain Crane - 229 euro, 4057 parts, 5,6 cent per part.

All of these sets have Power Functions, some more than others. The Volvo is literally packed with Power Functions, which explains the high price and low part count. A potential candidate for a comparison with the 42082 - Rough Terrain Crane is the 42009 - Mobile Crane Mk II. The 42009 packs 2606 parts for 7,7 cent per part, while the 42082 packs 4057 parts for 5,6 cent per part.

So, the universally praised Mk II crane has a 37,5% increase in price per part. Or the 42082 has a 27,3% decrease in price per part, depending on how you want to look at it. That is 5 years ago, and I'm not taking inflation into account. In other words; for 30 euro extra you get 1451 extra parts. This comes down to 2,1 cent per parts, which isn't bad at all. Some of you might argue that this is not the way to compare two sets, but these numbers are based on RRP and part count, which are numbers we can work with. Since this set has four of the big Claas wheels, a gearbox, and not a lot of PF,  I could also compare it to the 42070. But that set was way overpriced, so I don't think that would be fair. 

The average price of a part in a flagship, based on these 8 sets, is 9,4 cent. So for 229 euro you can expect 2155 parts. You get 1901 more than that. Thus drawing the preliminary conclusion that this set is big, but the price is more than reasonable. Of course, the original debate wasn't focused on the price per se, but whether the models are getting unnecessarily big. Let's carry on unboxing so we can find out.

THE BOX
The front of the box shows the model and its Power Functions components, a Battery Box and a Large Motor. No sign of new Powered Up elements yet. It also shows a picture of the model with an extended boom, measuring 100 cm high till the end of the boom and a chassis size of 48 cm long. Going by the size this isn't some two-bit crane. But size doesn't always matter. The box has the same width and height as last year's flagship (42070 - 6x6 All Terrain Truck), but it's a couple of centimeters deeper.

29581517988_2b8a5bee3c_b.jpg

INSIDE FLAP
Like the 42070, this box also has the flap, common to flagship sets. The inside shows a big picture of the model, which is most likely almost 1:1 scale. It's pretty impressive, that's for sure. You can also see that the upper body with the boom can rotate freely, thus 360 degree. This means that most of the mechanics, and battery box, are probably placed in the upper body and not in the chassis. This makes sense, and we have seen it before. Another picture shows the boom can be raised up to 60 degrees.

42547908985_3069bcd597_b.jpg

43452250491_486cfa2452_b.jpg

BACKSIDE
The back is divided into two sections/sides. The left side shows the functions of the main model, while the right side shows the alternative model, a Mobile Pile Driver. I will express my love for the B-model later this review :wink:

42547909385_9498ed4b43_b.jpg

CONTENTS OF THE BOX
The box contains:

  • 1x Inner box
  • 1x Sealed pack with two booklets and the sticker sheet
  • 4x Rim
  • 4x Tire
  • 25x Numbered bags (8 of which are in the inner box)

INNER BOX
The inner box contains the sealed pack with instruction booklets and sticker sheet. And it contains the bags for steps 1 to 4.

42755117724_f5042842ec.jpg 28565739627_2317d80d75.jpg 

INSTRUCTION BOOKLETS
Two instruction booklets. One for the chassis and one for the crane. Makes you wonder if one person can start building the chassis, while the other starts working on the crane.

43452249861_7e87161ffd.jpg 41644533190_441311396f.jpg

STICKER SHEET
Quite a few stickers to decorate this model. A construction vehicle just isn't the same without black and yellow stripes. And of course, a bunch of stickers indicating how to operate the functions.

42736360244_4614c22601.jpg

POWER FUNCTIONS ELEMENTS
A battery box and a large motor.

42736359574_840a6fc182.jpg 43452249181_5754ab3d3c.jpg

TIRES
These, so called Unimog Tires, seems to be very common nowadays, but they have only been used in two Technic sets before.

43452250281_a11e8e7454_b.jpg

RIMS
Four big red rims, also used in the 42054 - Claas Xerion and the 42077 - Rally Car.

41644533430_b6c524a20f_b.jpg

TIRES ON RIMS
Here a picture with the tires fitted on the rims.

43452250141_47d59ab9ca_b.jpg

NUMBERED BAGS
A total of 25 numbered bags.

28565739467_5323d1e5ee_t.jpg 42736359284_e16ac7e557_t.jpg 42736356534_b0a5dde07c_t.jpg 28565741187_e5ea9924ac_t.jpg 42736359064_8f92019b34_t.jpg 28565741127_f103ef116d_t.jpg 42736358874_33a84cdcda_t.jpg 42736359194_4f62b4d983_t.jpg 28565739307_82cb5ce487_t.jpg

42736358644_a008ff9de3_t.jpg 29581520048_b06edc36b4_t.jpg 29581519758_c5476eb318_t.jpg 42736358224_ce2e92e2f2_t.jpg 29581519428_f74e5c743f_t.jpg 42736358024_08f52d49cb_t.jpg 29581519088_050a75773a_t.jpg 42736357814_c805fd4501_t.jpg 29581517088_79e249a869_t.jpg

29581518778_d657575358_t.jpg 28565740217_1d63e0ace9_t.jpg 29581518518_236f81a792_t.jpg 28565740057_924157f9dd_t.jpg 29581518318_1a942606f9_t.jpg 28565739937_b281c085e6_t.jpg 42736356104_9e004ed813_t.jpg

HIGHLIGHTED PARTS
Actually there is only one interesting part in this set and that is the 11 x 11 Curved Gear Rack (or banana gear as some call them) from the 42055 - Bucket Wheel Excavator in a new color black. I am very happy that this gear has appeared in a color which can more easily be used in a MOC, for example an EV3 Robot :wink:

Not sure why I forgot to take a picture of the part itself, but here is a picture of the subassembly. This set contains a total of eight of these curved gear racks.

43710304722_4c7a86c878.jpg

PART LIST
A whopping 4.057 parts, but still only two pages with parts.

 43452249501_096a189573.jpg  42736356664_6bdbd89bec.jpg

THE BUILD
Bags, bags, bags and more bags. Lucky for us, they are numbered. If you like a challenge, open all the bags and create a big unsorted pile. That will keep you busy for quite some time. I will simply go from step to step :wink:

As expected we start with the chassis. And to be more precise; with the gearbox in the chassis. Really, orange pins?! Yes, really!

28565739757_43c0c0e72e_b.jpg

Right off the bat, lots of gears are added to the chassis. A white clutch gear is used in the bottom of the chassis. This indicates that these gears/axles will be connected to the Power Functions.

43452244691_3ddb9d50d6_b.jpg

At the end of the first step the center of the chassis has finished. This chassis with center gearbox is kind of reminiscent of models like th 8110 - Unimog and the 8258 - Crane Truck. Lots of gears, densily packed in a small space. There's little room left.

43472564491_ea260802fb_b.jpg

The bottom of the gearbox.

43472564221_9002aac03d_b.jpg

This set contains the 5x7 frames in two colors, light bluish grey and black. This is what you can do with two different color frames. I am not really fond of these kind of solutions, but I understand it can be convenient. Ohhh, and then there's the green liftarms. Because we need green in a red vehicle. I reckon someone opened up the bucket with green dye, so we do need to use more of these of parts in green :wink:

Actually, I am being semi-serious here. The Forest Machine uses these liftarms in green, so it's probably cost-effective to use them in multiple sets. We are seeing this with other parts as well. For example, the beforementioned orange 3L pins with bush and white 1L connector, etc. TLG tends to minimize the overall number of different parts used in (Technic) sets. I reckon this has something to do with optimizing their warehouse space. New parts are added every year and storage space is limited. Instead of using five different colors TLG uses one (maybe two) color. Doing this over the entire range of sets will save up a lot of space. Technic seems to be the ideal theme to use these kind of strategies. And it adheres to the "color vommit in the chassis" strategy.

42627306615_e7b5fdb8a1.jpg

One of the wheel assemblies. As you can see there is no actual suspension. Not even pendular suspension. Which seems odd for an Rough Terrain Crane, but I am no expert.

42627306225_b5e4452a6a_b.jpg

Here's the subassembly attached to the center of the chassis.

41723556830_1fb6448b03_b.jpg

An almost similar assembly attached to the other side. Instead of green liftarms, this one uses orange ones. This way you can more easily tell the sides apart. This is actually not a bad thing. I have mentioned it before, but I am actually a big fan of the color vommit approach. Altough I must admit that using these orange 3L pins with bush is definitely pusing it. Blue might have been a better choice, but that would have confliced with the Bugatti color scheme. Therefore, I think TLG made the decision to use orange in this as well. By the way; this set does also contain 40 of these 3L pins with bush in black. 

42627306415_aca2c1e367_b.jpg

The picture below shows how you can align the wheels. After aligning them, you slide the 16T gear in position. When I was building the set, I wondered why there was space between the gear and the liftarm, but it soon made sense.

41723556500_5aa21a70a5_b.jpg

A subassebly for the outriggers. I do like the design, but as with most outriggers on Technic models, they op...e....ra.....te.....ve......ry......slow......ly. I would love to show you a video of the outriggers, but since it's Tuesday now, I don't have enough time to lower them before the embargo date of this review :wink:

Just kidding of course. They do take a while, but since they are outriggers I find this acceptable. As long as the other functions aren't that slow.

42812022165_828de44b27_b.jpg

The chassis with front and rear wheel assemblies, and the front and rear outriggers. This is what you would expect from a crane this size. No unncessary use of extra parts so far.

42812022075_f58225a479_b.jpg

Next stop is the V8 engine with white oil filter and orange propellor/fan. I really like the oil filter. It's simple, but it adds detail to the model. The choice of orange as the color for the propellor seems odd, but it's likely a safety precaution. The emphasize that this is a part you need to watch, since it will be rotating when you move the crane. Not entirely sure, but it must be something along these lines.

43668616602_3536434b75_b.jpg

After the engine you will be building the connection between the chassis and the upper structure (crane body). This is done by using eight curved gear racks and an ingenious system in between. Click on the images to construct the ring.

42802598742_34ab81e0c5_o.png

42079

At that point you will attach the rims and the chassis is done. Worth noting is that the wheel caps in the rims use a lot of extra parts. Per cap approximately 12 parts are used, which boils down to 48 extra parts, just for the caps.

42812021185_da97d8a29c_b.jpg

This picture will be very hard to shoot with the crane attached, so I will give it to you now. This model implements Ackerman Steering Geometry. Or Reversed Ackerman Steering. Or even Reversed Reversed Ackerman Steering hehe. Not sure what the consensus in the forum was. I am no expert on steering assemblies, but Ackerman Steering boils down to the inner wheels turning at a different angle than the outer wheels, due to the fact the outer wheels have to travel a wider diameter. Ackerman Steering is something Technic fans like to see in models. For more information I suggest you start with Wikepedia and go from there :wink:

43668615422_047ffd4f7c_b.jpg

SECOND BOOKLET
This is an interesting part in the build. Reminds us of the 8043 - Motorized Excavator. Admittedly, I didn't think of this myself, but it has been addressed in the forum. Since the two 20T Bevel Gear with Pinhole have been placed on opposite sides of the actuators, this results in them turning in a different direction when the boom is raised (or lowered). Basically, this means that when the boom is raised, one of the LA's extends, while the other retracts. If one of the 20T gears was placed the other way around, this problem would not occur. Of course, the turning direction of one of the axles feeding the LA should be reversed for this to work. Since the gears attached to the LA's only rotate a tiny fraction when raising the boom, it leads me to believe that this is a calculated flaw. 

42812022005_295c73b0aa_b.jpg

In this video I try to demonstrate the issue at hand.

You continue to work your way back to the rear of the superstructure. Again, lots of gears and space which will be filled with gearboxes.

43668616982_11e1d0f5d4_b.jpg

This is the point in the second booklet where you can't build any further, untill you finish the first booklet. 

43668615792_e52eedfd15_b.jpg

At this stage you will attach the upper section to the chassis.

43668615252_cc7ce47e14_b.jpg

The boom is really massive. Feels solid like a rock. I am impressed with the sturdyness of this boom. It does a lot of panels and H-frames, so it's only logical, but I was still impressed.

41907207040_57ce9197f6_b.jpg

No wormgear to extend the boom this time.

43668614972_47387ebeb1_b.jpg

The other side of the boom with a white clutch gear for safety.

41907206940_06743ce097_b.jpg

The boom attached to the crane. Needless to say I am having a hard time getting the entire boom in the picture.

41907206680_db2cd3b760_b.jpg

The back of the upper section is closed with panels. The black ones can be removed for easy access to the battery. There are two gearboxes on the top of the crane. The left (bottom) one is to switch between crane and chassis functions. The right (upper) one is to switch between raising/lowering the boom, extracting/retracting the boom and lowering/raising the hook. The chassis functions are rotating the super structure and raising/lowering the outriggers.

43758235451_44a8f82ef8_b.jpg

COMPLETED MODEL
It is rather difficult to shoot decent pictures in the photo studio. I sure hope sets won't get much bigger than this. Looking at this model, I think TLG has done a remarkable job with this Rough Terrain Crane. The black chassis, with red elements, combined with the red super structure looks spot on. Lots of technic gears and elements provide an interesting build. I love how the two (or three) gearboxes work together.

29891224738_4fbb6786f4_b.jpg

Here you can clearly see the gearbox on this side of the chassis is used to rotate the crane. Because of the weight, the chassis tends to bend a little, but nothing to worry about.

43710080792_6aa5dde0f9_b.jpg

The boom of the crane can exend way more than this, but that makes is impossible for me to take pictures.

43761930231_b0eb168ca1_b.jpg

A close up from the front of the vehicle. The cabin door swings open to reveal the interior of the cabin.

43761930221_57f9d3c584_b.jpg

And one from the reaar.

43761929751_e195ac313d_b.jpg

I'm sorry I don't have anymore pictures of the completed model, but I think you have seen most of it. You can find out more by building it yourself :wink:

FEATURES AND FUNCTIONS
This model packs features you would expect from a mobile crane.

  • Raising/Lowering the boom
  • Extracting/Retracting the boom
  • Raising/Lowering the hook
  • Raising/Lowering the outriggers
  • Four wheel (Ackermann) steering
  • Working fake engine

Other than that there are some details like two cabinets which can be opened to store some gear. TLG has even added some walls which can be turned into part of a house or cabin.

OUTRIGGERS
Okay, let's get this out of the way. The outriggers are slow, really slow. I turned them on this morning and when I came home from work, they were halfway. Obviously, I am joking...I didn't go to work today. It's not that bad, but it would be nice if they operated a wee bit faster. You do need to use the four plates for them to properly reach the ground.

STEERING AND DRIVING
For a set this size steering and driving work properly. Even better than I expected.

CRANE
The thing I am most impressed with are the crane functions. These work like a charm. And, unlike the 42043 - Mercedes Arocs, this gearbox (or rather gearboxes) is very easy to understand. One look at the stickers is all it takes to be able to operate this thing. It offers a ton of playability. Linking gearboxes, instead of direct connection to a motor, can cause some slack. This can be seen when turning the crane. But this is just a minor gripe, just like the outriggers.

DOOR
A nice detail is the sliding door.

43758235381_2d71ceb26b.jpg 43710080572_f1ef11f483.jpg

PLAYABLE ITEMS
It's time to talk about the added playable items, like this toolbox. Some people don't feel this is necessary and some even seem to be a bit annoyed by it. I have addressed this in my 42069 - Extreme Adventure review where I state that I like these added details. And I still do. The Forest Machine also packs some extra's like a chainsaw, some logs etc. Actually, I see it in most of the Technic sets.

What I have seen is that this greatly enhances playability for younger LEGO fans. I am absolutely aware that this is a 11+ set, so it is not designed for a 5-year old. But seeing a 5-year old play with these Technic models and use all the extra items in the set for his "story" makes you realise that by adding playable items to a Technic set, it suddenly becomes a set for all ages. So, a handful of extra parts might be enough to prepare a 5-year old for Technic enthusiasm later down the line. After all, he (or she) is the future Technic target audience. Therefore, I am 100% in favor of adding these little details to Technic sets, even if these sets are 11+.

42802598742_34ab81e0c5_o.png

42079

PART COUNT
And now for the part count discussion. No doubt this model could have been made using less parts. It you take away the playable items, wheel caps, grey construction panel and outrigger plates, you already save a couple of hundred parts.

In the old days a Technic model used to be liftarms with gears inside. These days are over. Models are becoming more and more realistically looking, which means that less of the interior is visible. This also goes for the boom for example. In the old days we would have seen the interior of the boom and now it's covered with panels. I am not convinced that TLG is deliberately adding parts to the boom just to have more parts. I think TLG is doing this because they need to compete with other toys in the stores and these toys look like the real thing. Therefore TLG wants its models to look more like the real thing to, resulting in adding panels and other embellishments. Granted, TLG's marketing department won't mind having the biggest Technic set every year, so they can use this in Ads.

Like I said in the introduction; I am a fan of big sets. I love putting together a 4057 part set. But I reckon people are more upset about the price of bigger sets than the part count. This can be a false assumption, because I know not all AFOLs think like this. But if TLG had used 3057 parts instead of 4057 they could have easily maintained the same RRP. 3000 parts at 229 euro is 7,6 cents a piece, which is still rather cheap.

So my conclusion is that TLG might have upped the part count a bit, but still presented this set at a very affordable price. We already see this set popping up for around 179 euro, which boils down to 4,5 cent a piece, which is extremely affordabl for a Technic set. For me it would have been an issue if TLG priced this set at 349 euro RRP. Then I would have figured TLG was doing it on purpose.

Basically, this is a UCS-like Technic set and you get it for 229 euro, or less if you do some online shopping. Personally, I think this is extremely good value for money. Of course your mileage may vary, but this is how I see things.

B-MODEL
The B-model, a Mobile Pile Driver, is a cop out, nothing more, nothing less. I mean, seriously?! 4000+ parts and we get a model that is 95% the same as the original model. And if that's not the worst part, it's ugly AF, as some people would like to phrase it. The Pile Driver extension looks like something I could have built....when I was four . Maybe, well probably, I am insulting someone at The LEGO Group, but I can only hope that they were lacking time and/or resources, so they came up with this at the last moment.

The argument of time is rendered invalid, because this is what you can in a couple of days. Well, maybe not everybody, but @nico71 was able to turn this set into a front loader. Nobody will probably argue that this would have been a better B-model. Not sure what TLG's policy is regarding alternate models but the 42030 isn't in production anymore, so I don't see any reason not go for something like this.

43733817241_417a7d499f_b.jpg

The rear view of the model.

42829475625_53d9fd0fc7_b.jpg

And even the grey construction elements can be turned into something useful.

43733816831_153922068e_b.jpg

SUMMARY
I am a big fan of this set. It packs a lot of functionality and parts, for a decent price. The forum contains pages and pages with potential improvements, but that's out of scope for my review. Almost every set gets improved by AFOLs, so that's no surprise. Bottomline is that this is great set for existing AFOLs and new AFOLs alike. I can remember coming out of my dark ages in 2005, building the 8421 - Mobile Crane, which had a whopping 1885 parts. I remember the endless quantity of parts coming out of the box. Imagine a set with more than twice the part count. And again, this doesn't automatically mean a better set, but you will be impressed when you open this box.

Much has been said about the color vommit in the chassis of this model. I have grown fond of color vommit, because I like the variety in the parts. I do enjoy seeing all the colored parts. However, using orange 3L Pins with Bush is pushing it to the limit, especially on a red model. I would have preferred blue instead of orange.

My final conclusion is that for around 200 euro, you do get a LOT of value for money. I can see myself getting an extra copy, just because of that. I would almost go as far a stating that this could be considered a UCS Technic set.

PROS

  • Good looking model
  • Properly working functions (even Ackermann steering)
  • Several (linked) gearboxes
  • Great parts pack (especially for people new to Technic)
  • Very affordable, almost cheap

CONS

  • Some slack due to drivetrains and gearboxes
  • Outriggers operate very slowly
  • No suspension
  • No special parts besides the new curved gear rack in black

SCORE
How do I rate this set?

9 DESIGN
16218294336_cc3a1c982b_m.jpg
I love the looks, color scheme, everything.

9 BUILDING EXPERIENCE
16218294336_cc3a1c982b_m.jpg 
Very enjoyable build with several gearboxes and other functionality. 

8 FEATURES
16244195165_2b8d3e102f_m.jpg 
 Great features, with some room for improvement. No suspension though.

9 PLAYABILITY
16218294336_cc3a1c982b_m.jpg 
Implemented features provide lots of playability. 

8 PARTS
16244195165_2b8d3e102f_m.jpg 
Mostly common parts, but you do get a lot of them.

10 VALUE FOR MONEY
16244195295_e24aaaa114_m.jpg 
Price goes down to 4,8 cent per part if you shop around. It doesn't get any cheaper than this.

8,8 UCS ANYONE?

Thanks you for reading this review. All pictures can be found here.

Share this post


Link to post
Share on other sites

Woow, nice and helpful review @Jim. Too bad that there is no picture which is comparing the size of the crane with other big lego technic model like BWE or Porsche.

Share this post


Link to post
Share on other sites

Superb review. I really like this set. As you say, they could have made it with 1000 less pieces and still had the same functionality but also still have charged the same price and still appeared half reasonable in the process.

When you compare it to the large Bugatti and Porsche sets it is laughable how much licensing appears to add to set prices. 

Mir also looks like a great parts pack.

Edited by bigginsd

Share this post


Link to post
Share on other sites

First impression is ... very colourful build!  I'll say no more :lol:

As to the set overall, it's definitely on the wishlist.

 

PS:  Great review @Jim, many thanks for all the hard work and dedication to the cause.

Share this post


Link to post
Share on other sites

Great review as ever @Jim I agree that its a good looking model and also agree with your feelings of the B-model. If it was a licensed model I'd understand the small changes for the B but in this case I want to build something else.

Share this post


Link to post
Share on other sites

Im not entirely buying the price/partcount discussion myself, sure lego could have made this with 1000 parts less and sold for the same price, but clearly they felt that that would be a less succesful product, or they would have done so, same goes for charging more for this version of the crane. It still is a monstrous parts pack, so anyone looking to just get a bulk of parts to mess around with will be well-sorted with this set. For someone just looking to have a cool crane to play with or display, there are i think better bang/buck options.

As for the playable extras, i can respect Jim's point of view, and i dont see a problem with a toolbox and some chains in a 4000 part set, but the whole pre-fab building walls seem pointless to me. Most lego fans buying this crane will have plenty of stuff to lift, off-road vehciles, smaller cranes, or even the container from the mack truck. Sariel also made the point that the seperate walls need to be positioned so precisely, that manual intervention is needed and you cant just build the "house" by crane alone, which rather spoils the point.

Share this post


Link to post
Share on other sites

Great review. Excellent photos as always!

The C model by @nico71 is awesome. It makes me want to get this set even more!

Share this post


Link to post
Share on other sites

@Jim, great review, as always, thanks a lot!

Mine was delivered last Friday, luckily getting it for 188 €.

At the moment I'm still building the chassis, almost throught the first book. It sure is a fun build and I'm looking forward to another 430 pages of page turning excitement. Really, TLG, two books with 680 pages combined?!? The steps are at times so easy one could expect the set to be aimed at ages 6+.

What bothers me most is the (in my eyes) unnecessary variety of part colors... after the first chapter the model already contains parts from 11 colors like a Duplo set hommage. Why not use 3L pins with bush in light bluish gray instead of orange? Why yellow axles? Two colors for 1L pin connectors, 6L thin liftarms in yellow where no mistake seems possible and so on...

Different colors help to distinguish parts in a complex building process. But 680 pages plus this multitude of colors seems like an overkill to me.

All complaints aside this is a large beast that's very rewarding to build. As a Lego technic model it comes close enough to real rough-terrain cranes like Liebherr LRT.

Edited by Kepheus
spelling

Share this post


Link to post
Share on other sites

@kepheus

Normally im totally on board with the criticisms on colour vommit, but in this case all the weird colours seem to be very well hidden in the final product, so im not that offended

 

The 680 page manual though... i can only imagine. I just started rebuilding 42077 (at a leisurely pace) and why you'd need 295 steps for just over 100 parts is beyond me, the booklet is thick enough to be a novel...

Share this post


Link to post
Share on other sites

Thanks for this excellent review. I like the fact that you take on board feedback from the community. I am very much looking forward to building this. A true flagship set. I’m back on board after having skipped 42070.

Share this post


Link to post
Share on other sites
On 7/31/2018 at 4:22 PM, Jim said:

I didn't go to work today

I though you were starting a new job today.

Does your new boss knows you are a lego ambassador?

Share this post


Link to post
Share on other sites

Very good review...when I see color vomit on internal part I do not care, because this way building is easier and faster. More and more I use similar principle in my mocs...but color vomit on outside like 42080 set is not my thing. Images are great :thumbup:

Share this post


Link to post
Share on other sites
On 7/31/2018 at 10:22 AM, Jim said:

Not sure what TLG's policy is regarding alternate models but the 42030 isn't in production anymore, so I don't see any reason not go for something like this.

Well, AFOLs are fickle. We ask for different things all the time, so they do that, and now we complain. Simply that people ask then forget.

Share this post


Link to post
Share on other sites

Of note, I think the 3x7 red curved panels are new color, so this would be an interesting new part for me.

Otherwise, thanks for your review, I find them helpful, and the written format is easy to digest in between work.

Share this post


Link to post
Share on other sites
1 hour ago, Thirdwigg said:

Of note, I think the 3x7 red curved panels are new color, so this would be an interesting new part for me.

Ahhh I have missed that. Didn't even think about it. Thanks.

5 hours ago, Kepheus said:

 

What bothers me most is the (in my eyes) unnecessary variety of part colors... after the first chapter the model already contains parts from 11 colors like a Duplo set hommage. Why not use 3L pins with bush in light bluish gray instead of orange? Why yellow axles? Two colors for 1L pin connectors, 6L thin liftarms in yellow where no mistake seems possible and so on...

Yup, some things seem to be exaggerated. Upside, when you are done, you will hardly notice it :wink: 

Well, except for the yellow thin liftarms. You can still those clearly. Black would have been better.

Share this post


Link to post
Share on other sites

Good review, Jim. If I was looking to add to my collection I would buy this set and I love the alternative B model (great work). But I don't like the multi coloured chassis as shown from the underneath image. If they want to colour code they could have made the gear box in blue, the diffs could be housed in red and so on. The underneath image looks really bad and makes no sense to use so many different colours.

H

Share this post


Link to post
Share on other sites

Great review as always, but I am biased as i loved it the first time i saw it. Interesting angle on the evolution of technic sets, not something i'd really considered. For me this is an excellent balance of proper technic (gearboxes, steering, ring gear bearing) and making it look more realistic. Sets like the Chiron are too looks orientated for me.

This is a hairy-chested technic set that brings out the 12 yr old giddiness in me. And that what opens my wallet... i'm basically a 12 yr old with a budget!!

PS. Do you live near @nico71 or his he your alter-ego?! the pics of his excellent C model look to be taken in the same place...!

 

Share this post


Link to post
Share on other sites

I have to say, going with what's essentially 42030 as a B-model would probably not be received too well here. I think a large telehandler would have worked much better. That might be something work looking into :)

Edited by Bartybum

Share this post


Link to post
Share on other sites
6 hours ago, TeamThrifty said:

PS. Do you live near @nico71 or his he your alter-ego?! the pics of his excellent C model look to be taken in the same place...!

Hehe. Let’s say we did have PM conversations about pictures. But they are all his own work :wink: 

Share this post


Link to post
Share on other sites

What an awesome review Jim! I love hove you managed to keep it simple and easy to read despite the size and complexity of the set. And, of course, comparison with the other sets looks amazing. Thank you!

 

However, could you please elaborate on this part? 

On 7/31/2018 at 5:22 PM, Jim said:

Since the two 20T Bevel Gear with Pinhole have been placed on opposite sides of the actuators, this results in them turning in a different direction when the boom is raised (or lowered). Basically, this means that when the boom is raised, one of the LA's extends, while the other retracts. If one of the 20T gears was placed the other way around, this problem would not occur. Of course, the turning direction of one of the axles feeding the LA should be reversed for this to work. Since the gears attached to the LA's only rotate a tiny fraction when raising the boom, it leads me to believe that this is a calculated flaw. 

What is wrong with the drive? Why should axles feeding the LA be reversed? Why is it a flaw at all?

A 12-tooth double bevel gear takes its place right between 2 20-tooth double bevel gears and everything works just fine. 

42812022005_295c73b0aa_b.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.