Holodoc Posted May 23, 2018 2 hours ago, Skalldyr said: Is 3 Studs high 3 Studs is wrong - I think you meant 3 bricks high, right? But... ...that is also wrong, the height of part 32333 is 2 bricks and two plates. 1 hour ago, Redhead1982 said: This part appears in 3 Town sets (Tower Crane, Tower Crane, and Volcano Exploration Base) and in 3 Ninjago sets (Misfortune's Keep, Skull Truck, and Turbo Shredder) 1 Ninjatown point. 1 hour ago, Skalldyr said: hmmmm maybe that Bricklink lists only 3 colours as "Appears As Regular:" I regard this being correct. Total points stay the same (see above). Share this post Link to post Share on other sites
MstrOfPppts Posted May 23, 2018 (edited) I think someone (not to always blame @Holodoc) overlooked 15 points for my prophetic answer, because this part (in black as show in picture) indeed did appear in 3 sets in 3 different years (2000, 2006, 2011). 3 hours ago, Holodoc said: I think I should start to subtract points with wrong answers like: weighs 3 gramm... - when it weighs 0.1g less. Everyone knows that you have to include the envelope :D :D :D Edited May 23, 2018 by MstrOfPppts Share this post Link to post Share on other sites
Skalldyr Posted May 23, 2018 So still no right answer today...? It is a difficult one! Share this post Link to post Share on other sites
Holodoc Posted May 24, 2018 19 hours ago, Skalldyr said: hmmmm maybe that Bricklink lists only 3 colours as "Appears As Regular:" Bingo! Another right answer would have been: According to BL this part has been produced in 3 colours. We're closing in : Share this post Link to post Share on other sites
Skalldyr Posted May 24, 2018 (edited) Two legal connections. Bar on top and antistud at the bottom. The part was released two years ago In all the sets with the hot dog bun it came together with one of two sausage colours. Red or Dark Red. It is getting trickier every day! 20 minutes ago, Holodoc said: Bingo! Another right answer would have been: According to BL this part has been produced in 3 colours. We're closing in : That face of the minifig is hilarious!! (My alarm just went off. I took the phone in my hand. And I saw todays picture had just been posted ) Edited May 24, 2018 by Skalldyr Share this post Link to post Share on other sites
Lasse D Posted May 24, 2018 (edited) - There are 2 FDA approved ways for a minifig to serve, eat and hold this edible part: Using left hand and using right hand. - This is always part of a 2 part assembly: bun + sausage. - Since it came out there have only been 2 types of LEGO figures that have held this item: minifig and minidoll (This friends type minifig). - There are 2 sides of this part when wrapping around a sausage. - It is available in 2 conditions: new and used. - It is made using a 2 component mold (upper and lower section - see the molding line on the side) Edited May 24, 2018 by Lasse D Added guesses. Share this post Link to post Share on other sites
eiker86 Posted May 24, 2018 (edited) The design ID starts with number 2 - 25386 Edited May 24, 2018 by eiker86 Share this post Link to post Share on other sites
Holodoc Posted May 24, 2018 10 hours ago, Skalldyr said: Two legal connections. Bar on top and antistud at the bottom. The part was released two years ago In all the sets with the hot dog bun it came together with one of two sausage colours. Red or Dark Red. Right and the master-answer: 4 points! The last answer refers to the sausage - which is not on the photo. 9 hours ago, Lasse D said: - There are 2 FDA approved ways for a minifig to serve, eat and hold this edible part: Using left hand and using right hand. - This is always part of a 2 part assembly: bun + sausage. - Since it came out there have only been 2 types of LEGO figures that have held this item: minifig and minidoll (This friends type minifig). - There are 2 sides of this part when wrapping around a sausage. - It is available in 2 conditions: new and used. - It is made using a 2 component mold (upper and lower section - see the molding line on the side) I'll generously give points for the first 3 answers and the last one. New and used ... honestly? 5 hours ago, eiker86 said: The design ID starts with number 2 - 25386 1 point Skalldyr: 24 - I strongly believe we have an early winner - unless Redhead or Lasse explode creatively (and are awake/online at the right time...) Redhead: 12LasseD: 10 MstrOfPppts: 5 Quarry: 4 elleana: 3 L@go: 3 BobDeQuatre: 1eiker86: 1 mechamike: 1 Share this post Link to post Share on other sites
Redhead1982 Posted May 24, 2018 2 hours ago, Holodoc said: Skalldyr: 24 - I strongly believe we have an early winner - unless Redhead or Lasse explode creatively (and are awake/online at the right time...) Redhead: 12LasseD: 10 MstrOfPppts: 5 Quarry: 4 elleana: 3 L@go: 3 BobDeQuatre: 1eiker86: 1 mechamike: 1 Congratulations to Skalldyr for being an early winner. There's no way I'll be up and online for the last photo. I'll be picking up @MstrOfPppts in 12 hours, and still need to pack a few essentials for the road trip. After today's fun activities which included an early morning visit to the doctors, staying at home with a strange skin rash, going to the office twice during the day to deal with some papers, and the grand finale (a puke and a pee) starring my little girl, I wanna get to bed early. Really looking forward to have some adult fun. But first, first stop tomorrow Legoland Gunzburg. Have a safe trip and see you in Billund. Share this post Link to post Share on other sites
Skalldyr Posted May 25, 2018 5 hours ago, Redhead1982 said: Congratulations to Skalldyr for being an early winner. Have a safe trip and see you in Billund. Hey not too fast. You never know what will happen. Even tho I was pretty darn lucky with the timing of the part posts in here. Anyway have a good trip and enjoy Günzburg (Fabrik I guess)! Oh and please teach MstrOfPppts some of your skills. He was way to silent this countdown... Share this post Link to post Share on other sites
Lasse D Posted May 25, 2018 Well. I will be in meetings between now and this afternoon, and since she is away, it seems like you can just phone it in. Share this post Link to post Share on other sites
Skalldyr Posted May 25, 2018 (edited) ONE connection: antistud ONE stud wide. All the spiral like swirls go together in ONE point. That border between the lower part and the top with the swirls is One millimeter thick. Brickset name is: 1X1 Decoration Top No. 1 Bricklink says that the part appeared with only One Minifig. (Eventho Babette is a rather strange Fig...) Edited May 25, 2018 by Skalldyr Share this post Link to post Share on other sites
Lasse D Posted May 25, 2018 (edited) There are two connections: anti stud and outer ring stud grip (you can place it between 4 studs on a 2x2 plate), so that can't be the right answer. The piece only fits in one minifig hand at a time The top part of the piece is only a single (1) point The piece in this color only comes in 1 Promotional set: 40181 The piece in this color only came in 1 Friends set in 2014: 41035 The piece in this color only came in 1 Jurassic World set: 75919 The piece in this color only came in 1 modular building in 2015: 10246 The piece in this color only came in 1 modular building in 2016: 10251 The piece in this color only came in 1 Star Wars set in 2016: 75158 The piece in this color only came in 1 regular (not value pack) Friends set in 2016: 41119 The piece in this color only came in 1 value pack: 66539 The piece in this color only came in 1 modular building in 2017: 10246 The piece in this color only came in 1 non-modular set in 2017: 40174 There is only 1 piece :) Edit. I need more answers! There is only one of this piece in this color in the set 40174 There is only one of this piece in this color in the set 41119 There is only one of this piece in this color in the set 76038 There is only one of this piece in this color in the set 41035 There is only one of this piece in this color in the set 40181 There is only one of this piece in this color in the set 66539 There is only one of this piece in this color in the set 5004552 OK. I'm out. Edited May 25, 2018 by Lasse D More answers! Share this post Link to post Share on other sites
Skalldyr Posted May 25, 2018 3 minutes ago, Lasse D said: There are two connections: anti stud and outer ring stud grip (you can place it between 4 studs on a 2x2 plate), so that can't be the right answer. [...] :) Hmm very true. I forgot. And holy s..t this is insane! You are into it right now Lasse!!! Share this post Link to post Share on other sites
Lasse D Posted May 25, 2018 (edited) You must have the feeling that the victory is earned - not just given to you :D Edit. If my calculations are correct and Holodoc gives points for all answers, then we should be neck-to-neck. It then comes down to 3 pointers, where you have a slight advantage (9 to 0, or something like that). Edited May 25, 2018 by Lasse D Share this post Link to post Share on other sites
Holodoc Posted May 25, 2018 3 hours ago, Skalldyr said: ONE connection: antistud ONE stud wide. All the spiral like swirls go together in ONE point. That border between the lower part and the top with the swirls is One millimeter thick. Brickset name is: 1X1 Decoration Top No. 1 Bricklink says that the part appeared with only One Minifig. (Eventho Babette is a rather strange Fig...) I will answer in colours. Red=0, green=1, bold=3 points. 1 2 3 4 5 6 = 6 points 2 hours ago, Lasse D said: There are two connections: anti stud and outer ring stud grip (you can place it between 4 studs on a 2x2 plate), so that can't be the right answer. The piece only fits in one minifig hand at a time The top part of the piece is only a single (1) point The piece in this color only comes in 1 Promotional set: 40181 The piece in this color only came in 1 Friends set in 2014: 41035 The piece in this color only came in 1 Jurassic World set: 75919 The piece in this color only came in 1 modular building in 2015: 10246 The piece in this color only came in 1 modular building in 2016: 10251 The piece in this color only came in 1 Star Wars set in 2016: 75158 The piece in this color only came in 1 regular (not value pack) Friends set in 2016: 41119 The piece in this color only came in 1 value pack: 66539 The piece in this color only came in 1 modular building in 2017: 10246 The piece in this color only came in 1 non-modular set in 2017: 40174 There is only 1 piece :) There is only one of this piece in this color in the set 40174 There is only one of this piece in this color in the set 41119 There is only one of this piece in this color in the set 76038 There is only one of this piece in this color in the set 41035 There is only one of this piece in this color in the set 40181 There is only one of this piece in this color in the set 66539 There is only one of this piece in this color in the set 5004552 1 2 that's what Skaldyr already wrote in his answer3 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20. = total: 19 points I have to admit I was tended to give just one point for alle the same answers, but answer 13 made me change my mind. THE FINAL RESULTS ARE: Skalldyr: 30 LasseD: 29 Redhead: 12 MstrOfPppts: 5 Quarry: 4 elleana: 3 L@go: 3 BobDeQuatre: 1 eiker86: 1 mechamike: 1 Congratulations Skalldyr! And a special mentioning goes to LasseD for very unusual answers and for being a very close 2nd! So we have come to the end of the countdown and I would like to thank all of you participating, commenting, being great friends and taking not all of it too seriously! I reckon we are in great mood for the upcoming days = mission accomplished! See you all soon in BILLUND! Share this post Link to post Share on other sites
Skalldyr Posted May 25, 2018 5 hours ago, Holodoc said: THE FINAL RESULTS ARE: Skalldyr: 30 LasseD: 29 Redhead: 12 MstrOfPppts: 5 Quarry: 4 elleana: 3 L@go: 3 BobDeQuatre: 1 eiker86: 1 mechamike: 1 Congratulations Skalldyr! And a special mentioning goes to LasseD for very unusual answers and for being a very close 2nd! So we have come to the end of the countdown and I would like to thank all of you participating, commenting, being great friends and taking not all of it too seriously! I reckon we are in great mood for the upcoming days = mission accomplished! See you all soon in BILLUND! Wow first of all we have to thank you Holodoc for making this possible every year! The last 10 days to the event are always special because of your countdown! And then I have to say that it was a good challenge this year. Especially with Lasse going crazy in the end! Totally as close as you predicted Lasse! Always fun and see you tomorrow :) Share this post Link to post Share on other sites
Lasse D Posted May 25, 2018 Haha! I totally misread that double answer. Good challenge, and congrats Mr. Crab. Share this post Link to post Share on other sites
