Holodoc Posted May 22, 2018 6 hours ago, L@go said: This part clearly forms a figure of eight in your picture - which is dividable by 4! It also has the four letters L E G O clearly visible in the picture... ...aaaaand the thickness of the ring itself, measured across the top, is roughly 4 millimetres. First answer: , 2nd: , 3rd: roughly isn't exact enough. 5 hours ago, MstrOfPppts said: This part was introduced in 1999 when it came in 4 sets. What trickery is this now? Me and Skalldyr are loosing points for no reason - or is it bad sportsmanship? Loosing points? I have no clue what you are talking about. Skalldyr had 17 points. Minus 1 it equals 4x4. You had 3, plus 1 equals 4. Today it rained 4mm/m². In my family we are with 4. It took me almost 4 minutes to think about a stupid answer. Everything is perfectly right. okay, okay... Skalldyr: 17 Redhead: 12 MstrOfPppts: 4 Quarry: 4 LasseD: 3 (4/5 yet to be confirmed) elleana: 3 L@go: 3 mechamike: 1 @MstrOfPppts: You've got to try harder than just blaming me to win this! Share this post Link to post Share on other sites
Skalldyr Posted May 22, 2018 1 hour ago, Holodoc said: Skalldyr had 17 points. Minus 1 it equals 4x4. You had 3, plus 1 equals 4. Today it rained 4mm/m². In my family we are with 4. It took me almost 4 minutes to think about a stupid answer. Everything is perfectly right. Hahaha I am actually already starting to think in these ways all day long since the countdown started... Share this post Link to post Share on other sites
MstrOfPppts Posted May 22, 2018 My keyboard is already broken, I can not try hard enough. Here's trying hard: The piece for tomorrow appeared in 3 sets in 3 different years! Share this post Link to post Share on other sites
Redhead1982 Posted May 22, 2018 @Skalldyr Staying up late? Share this post Link to post Share on other sites
Rolli Posted May 23, 2018 12 hours ago, Holodoc said: Skalldyr had 17 points. Minus 1 it equals 4x4. You had 3, plus 1 equals 4. Today it rained 4mm/m². In my family we are with 4. It took me almost 4 minutes to think about a stupid answer. I'd like to award Holodoc 100 points for this answer. He's outdoing ALL of you Share this post Link to post Share on other sites
Skalldyr Posted May 23, 2018 7 hours ago, Redhead1982 said: @Skalldyr Staying up late? Haha yes. Staying up late, waking up early. Commitment is needed for the countdown. Share this post Link to post Share on other sites
Quarryman Posted May 23, 2018 2 minutes ago, Rolli said: I'd like to award Holodoc 100 points for this answer. He's outdoing ALL of you Actually he deserves infinite points for having the patience to deal with all our nonsense in the countdown threads year after year after year. Share this post Link to post Share on other sites
Redhead1982 Posted May 23, 2018 6 minutes ago, Skalldyr said: Haha yes. Staying up late, waking up early. Commitment is needed for the countdown. Same here. :-D Was up til 3 in the morning, and stil no sign of no. 3. Share this post Link to post Share on other sites
Skalldyr Posted May 23, 2018 I see: "Recently Browsing Skalldyr, Redhead1982, Quarryman, Lasse D" Everyone lurking around Share this post Link to post Share on other sites
Bob De Quatre Posted May 23, 2018 We're already at 3... Share this post Link to post Share on other sites
Skalldyr Posted May 23, 2018 Just now, Bob De Quatre said: We're already at 3... Yes so close. This feels good! I really love how this countdown brings up all my excitement for the event Share this post Link to post Share on other sites
Holodoc Posted May 23, 2018 Escuse me for being late to the party! I needed to dry my laughing tears after reading all your answers here. You are making my day - thank you so much! 1 hour ago, Bob De Quatre said: We're already at 3... YEP! And of course nobody was browsing NOW! Share this post Link to post Share on other sites
Skalldyr Posted May 23, 2018 Comes in 3 colours Weighs 3 gramm Is 3 Studs high Share this post Link to post Share on other sites
MstrOfPppts Posted May 23, 2018 3 holes at the top! Share this post Link to post Share on other sites
Lasse D Posted May 23, 2018 - There are 3 types of connections: stud, antistud and technic pin holes. - Cylinder pieces can be mounted in 3 angles: straight (using top or bottom row), leaning left and leaning right using the standard side tilted rows. Share this post Link to post Share on other sites
Skalldyr Posted May 23, 2018 Has 3 legal connections possible. Studs on top, Holes for pins, Antistuds on the bottom. Dammit Lasse was faster Share this post Link to post Share on other sites
Bob De Quatre Posted May 23, 2018 That part generated 3 posts in less than 3 minutes And has "333" in it's part number :) Share this post Link to post Share on other sites
Lasse D Posted May 23, 2018 5 minutes ago, Skalldyr said: Comes in 3 colours In my 8436 it came in old gray, so technically there are 4 colours (gray, new gray, black and trans). - The part number is 32333 is dominated by the number "3". Share this post Link to post Share on other sites
Skalldyr Posted May 23, 2018 2 minutes ago, Lasse D said: In my 8436 it came in old gray, so technically there are 4 colours (gray, new gray, black and trans). Good to know! If that is the case I would say it comes in 3 solid coulurs excluding trans. (since we got points for this on day 5) Share this post Link to post Share on other sites
Holodoc Posted May 23, 2018 On 22.5.2018 at 9:04 AM, Lasse D said: There are 4 notches inside of the pin hole of this part, which allows it to grip onto a pin without making it impossible for children to separate the parts again. That is correct, but you more have to know it than that you can really see it. 4 minifigs can stand in a circle, all holding the part as shown in the picture Nope: Share this post Link to post Share on other sites
Skalldyr Posted May 23, 2018 5 minutes ago, Holodoc said: Nope: Wow these Minifigs Share this post Link to post Share on other sites
Redhead1982 Posted May 23, 2018 This part appears in 3 Town sets (Tower Crane, Tower Crane, and Volcano Exploration Base) and in 3 Ninjago sets (Misfortune's Keep, Skull Truck, and Turbo Shredder). Share this post Link to post Share on other sites
Holodoc Posted May 23, 2018 47 minutes ago, Skalldyr said: Comes in 3 colours Weighs 3 gramm Is 3 Studs high 40 minutes ago, Lasse D said: In my 8436 it came in old gray, so technically there are 4 colours (gray, new gray, black and trans). Wohoo. Must be a Q part then! So the right answer is:??? I havent read it yet. (Hint: It's a combination of both answers with Valentin being very close ) I think I should start to subtract points with wrong answers like: weighs 3 gramm... - when it weighs 0.1g less. 1 point for Valentin, 1 Q-point for Lasse 47 minutes ago, MstrOfPppts said: 3 holes at the top! And this is the kind of answer you want to win the challenge with? 1 obvoius point. 45 minutes ago, Lasse D said: - There are 3 types of connections: stud, antistud and technic pin holes. - Cylinder pieces can be mounted in 3 angles: straight (using top or bottom row), leaning left and leaning right using the standard side tilted rows. 1 connection point, 1 creative-and-all-new-angle-answer point. 45 minutes ago, Bob De Quatre said: That part generated 3 posts in less than 3 minutes And has "333" in it's part number :) 1 fun point for the first answer! (Just 18 to win this challenge - don't stop right now!) Skalldyr: 18 Redhead: 12LasseD: 6 MstrOfPppts: 5 Quarry: 4 elleana: 3 L@go: 3BobDeQuatre: 1 mechamike: 1 Share this post Link to post Share on other sites
Skalldyr Posted May 23, 2018 5 minutes ago, Holodoc said: So the right answer is:??? I havent read it yet. (Hint: It's a combination of both answers with Valentin being very close ) hmmmm maybe that Bricklink lists only 3 colours as "Appears As Regular:" Share this post Link to post Share on other sites
Lasse D Posted May 23, 2018 19 minutes ago, Holodoc said: That is correct, but you more have to know it than that you can really see it. Nope: Nice find. My limitation came from the hands all turning the same way, which is why I couldn't fit the gold one... that and incompetence. Share this post Link to post Share on other sites
