Redbird11 Posted September 25, 2018 So I haven’t seen anyone post lighting for the cockpit so I took a shot at it and this is what I came up with. Share this post Link to post Share on other sites
Renegade Clone Posted March 3, 2019 Would someone in possession of this beast be able to post the dimensions (cm or studs) please? Thanks in advance! Share this post Link to post Share on other sites
Redbird11 Posted March 3, 2019 rough dimensions are 37” or 94 cm “length" 18.3” or 46.5 cm “height" 10” or 25.4 cm “width" Share this post Link to post Share on other sites
Malthus101 Posted March 4, 2019 This Cavegod sandcrawler is just incredible! Cavegod.. please don't stop putting out the manual etc, I'm not quite ready to do it now but I would definitely buy the manual and all the bricks needed in the future! Can it all be bought as 1 kit? What other creations have you made Cavegod? Did you make an AT-AT too? Thanks! Share this post Link to post Share on other sites
cavegod Posted March 4, 2019 1 hour ago, Malthus101 said: This Cavegod sandcrawler is just incredible! Cavegod.. please don't stop putting out the manual etc, I'm not quite ready to do it now but I would definitely buy the manual and all the bricks needed in the future! Can it all be bought as 1 kit? What other creations have you made Cavegod? Did you make an AT-AT too? Thanks! Currently available are At-At, Sandcrawler, Tie Defender, Zeta shuttle, Coming soon is the Rebel Transport and Kylo Ren's command shuttle Share this post Link to post Share on other sites
Ragni Norgrimson Posted March 5, 2019 UCS Sandcrawler Ready to crawl by Ragni Norgrimson, auf Flickr Here is my beauty and how you could have seen it at the Lego Fanwelt 2018. UCS Sandcrawler technical access terminal by Ragni Norgrimson, auf Flickr This is the technical site I was talking about previously. 2 Servos are controlling the movement via switches. Above you can see a peak of the light panel I've installed in my interior. Share this post Link to post Share on other sites
muhkuh Posted March 5, 2019 On 3/4/2019 at 12:03 PM, cavegod said: Currently available are At-At, Sandcrawler, Tie Defender, Zeta shuttle, Coming soon is the Rebel Transport and Kylo Ren's command shuttle Hey cavegod, you think you will offer the lambda shuttle some time?:)) Share this post Link to post Share on other sites
muhkuh Posted March 6, 2019 On 3/5/2019 at 2:06 PM, cavegod said: Lambda shuttle? sry? Share this post Link to post Share on other sites
cavegod Posted March 6, 2019 Thats not a Lambda thats an imperial landing craft Share this post Link to post Share on other sites
BadSisko Posted July 4, 2019 The interior pics seem to show the the dark tread part no 3873 running the length but I can't find it listed in the parts list. Can someone help out? Share this post Link to post Share on other sites
Sandlot_Creations Posted July 4, 2019 This is incredible! Really nice work :) Share this post Link to post Share on other sites
bricksmarlin Posted July 5, 2019 On 7/22/2018 at 9:20 AM, bricksmarlin said: I think you need 170 elements/parts for the conveyor belt! 30 for each of the 2 shorter ones and 55 for each of the the longer ones! Share this post Link to post Share on other sites
BadSisko Posted July 6, 2019 Bricksmarlin, thanks for the info. Two questions: what do you mean by shorter and longer ones and what color(s)? DBG? Share this post Link to post Share on other sites
bricksmarlin Posted July 6, 2019 31 minutes ago, BadSisko said: Bricksmarlin, thanks for the info. Two questions: what do you mean by shorter and longer ones and what color(s)? DBG? I think you mean this section?I hope the picture shows what I mean!Color for 3873 is black! Share this post Link to post Share on other sites
BadSisko Posted July 7, 2019 Yep that's what I was wondering about. Thanks! Share this post Link to post Share on other sites
viptouge Posted July 18, 2019 Hey guys, Wondering if someone can help me. I can't seem to figure out how these two joints connect together. I've been going over the instructions and it looks like I did everything right. Share this post Link to post Share on other sites
muhkuh Posted July 18, 2019 59 minutes ago, viptouge said: Hey guys, Wondering if someone can help me. I can't seem to figure out how these two joints connect together. I've been going over the instructions and it looks like I did everything right. just look at some pages before;) Share this post Link to post Share on other sites
viptouge Posted July 18, 2019 3 hours ago, muhkuh said: just look at some pages before;) I've been looking through the pages and can't seem to find it. By any chance you could post a pic of how this joint connects? Thanks :) Share this post Link to post Share on other sites
bricksmarlin Posted July 18, 2019 On 5/23/2018 at 2:33 PM, cavegod said: Hi, Your missing 1x2 ball joint connector with socket and ball at opposit ends. https://www.bricklink.com/v2/catalog/catalogitem.page?P=14419#T=C This is the missing part! Share this post Link to post Share on other sites
viptouge Posted July 18, 2019 1 hour ago, bricksmarlin said: This is the missing part! AH! Thanks Marlin! Share this post Link to post Share on other sites
bricksmarlin Posted July 19, 2019 On 9/7/2018 at 8:33 PM, bricksmarlin said: Use plate 3794b above and underneath 57909 (brick with ball) to move the upper side walls backwards by a half stud. Then it should look like that. My pleasure! Check the pictures on side 11 to get the sidewalls mounted correctly! Awesome collection by the way, and very nice pics! The "monarch" is one of my next projects, can't wait to built it myself! greetz Steffen Share this post Link to post Share on other sites
viptouge Posted July 19, 2019 13 hours ago, bricksmarlin said: My pleasure! Check the pictures on side 11 to get the sidewalls mounted correctly! Awesome collection by the way, and very nice pics! The "monarch" is one of my next projects, can't wait to built it myself! greetz Steffen Yes, thanks to your detailed photos, I fixed the alignment early on when I reached that point of the build. I didn't catch the link for the missing end ball and cup socket pieces until now when you pointed it out. Haha Thanks again. The Monarch is for sure one on my favorite builds! I'm sure you'll enjoy it! Share this post Link to post Share on other sites
bricksmarlin Posted July 25, 2019 @viptouge How is it going? All problems figured out? Share this post Link to post Share on other sites