Nura Posted July 28, 2017 Hi community, after reading a lot of posts in this forum i want to present to you my finished MOC of a Volkswagen Polo R WRC. I spent some month of building time to create my first own creation. Technical features are reduced to a minimum to get a first easy success. The model is nearly in scale 1:10 and full remote controlled by one SBrick. But let us start with the framework: The car has all-wheel drive with front, middle and rear differentials. For driving two L-motors are placed in the back. In my final version I have placed the battery box between the L-motors. The servo-motor is for steering, is located between the race seats and powers also the steering wheel. I had a lot of space difficulties with the fake motor and the front bumper. Here is a WIP picture: And now here are some pictures of the final version with decals: Front: Back: Some interior: For Power-On you have to push the reserve tire, which covers the battery box and you can not see the power functions. And finally the video: I hope you like it! Give me some feedback! More pictures you find on http://bricksafe.com/pages/Nura1989/lt-vw-polo-r-wrc-full-rc In future I want to build more complex cars, but therefore I have to build bigger. :-) So, now I am searching for remote controlled gearboxes. Best regards Nura Share this post Link to post Share on other sites
iv-tecman Posted July 28, 2017 Amazing RC Model. Really nice. Share this post Link to post Share on other sites
JDL1967 Posted July 28, 2017 (edited) I think you have done a great job, nice, little, compact car. Good colors and i like the redbull decals.. Edited July 28, 2017 by JDL1967 Share this post Link to post Share on other sites
mocbuild101 Posted July 28, 2017 Nice! The sides don't look very good, but the front looks great! Also, Welcome to Eurobricks @Nura Share this post Link to post Share on other sites
Rudivdk Posted July 28, 2017 Looks awesome, especially the front end. Sides are a bit cluttered with all the little pieces and colors, but overall shape is still good. Nice job on fitting in all RC stuff together with 4 wheel drive too. I think you did great for a first creation, keep it up! Share this post Link to post Share on other sites
Leonardo da Bricki Posted July 28, 2017 Nice build, this car looks great, especially from the front! Maybe try to make the sides a little bit cleaner with fewer colored parts mixed together, but overall, this is a really good car! And welcome to EuroBricks! Share this post Link to post Share on other sites
Nura Posted July 28, 2017 Thanks to all! :-) Yeah, the color mixed sides were difficult. I tried to get the original color scheme without using decals. Here is a picture of the original: For my next project I will concentrate on one color. ;-) Most MOC's look better with a simple color scheme. Share this post Link to post Share on other sites
Jeroen Ottens Posted July 28, 2017 Wow, great first MOC! I agree with others about the colourscheme, but your front is showing some good potential Share this post Link to post Share on other sites
Paknaloid Posted July 28, 2017 Jumping on this late to say it is a great MOC! Congrats. it has also got me excited about the potential for the rumoured H1 2018 rally car official set. Hopefully lots of scope for custom decals, a rally car is one of the few vehicles where loads of stickers looks better and not worse. Share this post Link to post Share on other sites
Lakop Posted July 28, 2017 Works for me! Great job. Do I recognise those parts from the ocean explorer, 42064? Those blue panels at the front work well. H Share this post Link to post Share on other sites
BrickbyBrickTechnic Posted July 29, 2017 Awesome MOC! Personally I'm not a sticker person, but in this case they certainly enhance the model. It is stunning. Share this post Link to post Share on other sites
KamalMYafi Posted July 29, 2017 Very impressive RC car for your very first build! I really love the shaping... Share this post Link to post Share on other sites
LEGO Train 12 Volts Posted July 29, 2017 You've done a great work! You've perfectly captured the shape! Share this post Link to post Share on other sites
jorgeopesi Posted July 29, 2017 Awesome car, congratulations for a great work . Share this post Link to post Share on other sites
mocbuild101 Posted July 29, 2017 11 hours ago, Nura said: Here is a picture of the original: I see, it actually looks much better when you compare it to the original. Share this post Link to post Share on other sites
grum64 Posted July 29, 2017 Terrific build, more so considering it's your first MOC. Very well done. Share this post Link to post Share on other sites
Nura Posted July 29, 2017 18 hours ago, BrickbyBrickTechnic said: Awesome MOC! Personally I'm not a sticker person, but in this case they certainly enhance the model. It is stunning. I also like MOCs without decals more. For example you could build the prototype just in white. But therefore you need another solution for the hood. On 07/28/2017 at 11:03 PM, Horace T said: Works for me! Great job. Do I recognise those parts from the ocean explorer, 42064? Those blue panels at the front work well. H You are right! I just bought the ocean explorer for it. Share this post Link to post Share on other sites
Psithur Posted July 30, 2017 Nice. The decals are great, really add to the model's appearance. Share this post Link to post Share on other sites
Lucullus Posted July 30, 2017 On 28.7.2017 at 4:10 PM, Nura said: Technical features are reduced to a minimum You even added technical features, as the real vehicle has no central diff (there were prototypes for 2017 season, that had one, but as VW stopped rallying after 2016 they were never used). However, it will improve the models playability. Sorry for this criticism, but as I am currently building the exact same thing (in bigger scale), I had to mention it. Share this post Link to post Share on other sites
Nura Posted July 30, 2017 1 hour ago, Lucullus said: You even added technical features, as the real vehicle has no central diff (there were prototypes for 2017 season, that had one, but as VW stopped rallying after 2016 they were never used). However, it will improve the models playability That is right. I planed an all-wheel drive without thinking that the real one has no central diff. But it can be locked! I am excited to see your results! Share this post Link to post Share on other sites
Thorsten50 Posted August 5, 2017 (edited) @Nura Do you have an LXF file of tis model? This modell would still be missing in my WRC series (Building Instruction like) Edited August 10, 2017 by Thorsten50 Share this post Link to post Share on other sites
DugaldIC Posted August 5, 2017 Very well done on such a small scale. I love the details! Share this post Link to post Share on other sites
Nura Posted August 12, 2017 On 08/05/2017 at 10:42 PM, Thorsten50 said: @Nura Do you have an LXF file of tis model? This modell would still be missing in my WRC series (Building Instruction like) Maybe you have recognized my questions to your software solutions. ? Last days I tried MLCad and LDD. SR3D would be an option too. I will create an lxf file of this model and would like to have instructions. Share this post Link to post Share on other sites
Thorsten50 Posted August 12, 2017 (edited) @Nura I had written that shortly before it. If you need help with the stickers, you can Help you. Edited August 12, 2017 by Thorsten50 Share this post Link to post Share on other sites