Massive 6x6 trial truck

[Toni-23]

HI!
Today a would like to show you my new 6x6 trial truck!
first of all a would like to say:it really heavy)
3 xl motors for drive
1 m motor for steering
3-rd party tires
but it's not so important:)
This trucks is fully for trial,and a think this truck can impress you

secret photo:)
ladies and gentlemen,here it is,my favorite test truck, test drive:
What you think about that?
Please leave your comments

 

[Imanol BB]

Oh my, this truck looks terrific, that ground clearance is just crazy!!! the suspension twists a lot, i really like this truck, with 3 XL´s it must have a lot of torque, the body looks good too, it looks like an Ural truck, i hope to see some more pictures (and/or videos) of it soon, maybe a detailed look of it  good luck in the truck trial (And i must say that it really impressed me).

[Leonardo da Bricki]

Awesome truck! This is huge, but it performs superbly. I second the request for more pics. The suspension is great, you can really see the axles range of travel at 0:59.

[Victor Imaginator]

Tony-23, great work) I just love that suspension. And bodywork fits perfectly. Truck looks a little weak for 3 XL motors on the video, but maybe it's because of weight and snow.

[2LegoOrNot2Lego...]

I agree that the suspension is just amazing...love it!

47 minutes ago, Victor Imaginator said:

...Truck looks a little weak for 3 XL motors...

Also do I agree on this... ;-) ...@Toni-23 did you use multiple battery boxes or just one? Maybe this has anything to do with it...

[Aleh]

Very nibe trial truck! Looks simalar to Soviet Ural truck.

As 2LegoOrNot2Lego says try to connect XL motors to two BBoxes...
Looks huge and great! All as I like! Clearance is unbelievable!!

[Toni-23]

13 hours ago, Imanol BB said:

Oh my, this truck looks terrific, that ground clearance is just crazy!!! the suspension twists a lot, i really like this truck, with 3 XL´s it must have a lot of torque, the body looks good too, it looks like an Ural truck, i hope to see some more pictures (and/or videos) of it soon, maybe a detailed look of it  good luck in the truck trial (And i must say that it really impressed me).

Thanks a lot!

i think it's not a problem,but little bit later)
p.s.
now i build mod for this truck,i think you can see it in future time

 

6 hours ago, 2LegoOrNot2Lego... said:

I agree that the suspension is just amazing...love it!

Also do I agree on this... ;-) ...@Toni-23 did you use multiple battery boxes or just one? Maybe this has anything to do with it...

truck has 2 battery box (at the left and right side)
i took small battery box for power the leds,when I photographed truck
 

Edited January 31, 2017 by Toni-23

[nerdsforprez]

Are the tires 1.9  or 2.2 third party tires?

[Toni-23]

4 minutes ago, nerdsforprez said:

Are the tires 1.9  or 2.2 third party tires?

1.9

[Aleh]

5 hours ago, nerdsforprez said:

Are the tires 1.9  or 2.2 third party tires?

By the way do the 2.2 tires fit these rims well enough?

[nerdsforprez]

Not sure what rims the OP is using..... but what is commonly used are

 

(56x34mm Medium racing tires)

If this is the case then, no... they do not fit those tires.  Like I said though, i am was not sure of the wheel used.  The getup in the front tires (chains on 40T gear) is an interesting get-up that I have not seen before, but perhaps it is just used for aesthetic purposes.

To work with 2.2 tires you need to use two

 Interlocked together or the porsche rims.  I have not tried the Super Street Sensation wheels nor the Power Puller wheels, so these may work, but I don't know.  I have written more about the use of 2.2 tires here (page 21)

and also when I did a pneumatic version of the 8110 unimog using 2.2 tires a few years back.

http://www.moc-pages.com/moc.php/407959

 

 

 

 

 

[Aleh]

9 hours ago, nerdsforprez said:

Not sure what rims the OP is using..... but what is commonly used are

 

(56x34mm Medium racing tires)

If this is the case then, no... they do not fit those tires.  Like I said though, i am was not sure of the wheel used.  The getup in the front tires (chains on 40T gear) is an interesting get-up that I have not seen before, but perhaps it is just used for aesthetic purposes.

Thanks!

[JJ2]

This is quite massive, did any drive-chain parts break?

I'm surprised that soft springs were able to keep it suspended, I thought they would be way to soft.

[braker23]

That's a cool truck, quite impressed by it's ground clearance and suspension travel, although it's a bit slow for my taste. Keep up the good work!

[Sylvian]

awesome! I think it performs quite well for its size,.. 

Edited February 2, 2017 by Sylvian
spelling

[Toni-23]

15 hours ago, JJ2 said:

This is quite massive, did any drive-chain parts break?

I'm surprised that soft springs were able to keep it suspended, I thought they would be way to soft.

thank you!
i'm surprised ,but...no,i didn't break any drive-chain parts)
truck has only 4 joints ,and all of them still alive;)

5 hours ago, braker23 said:

That's a cool truck, quite impressed by it's ground clearance and suspension travel, although it's a bit slow for my taste. Keep up the good work!

thanks a lot!
now I have modified chassis,for give it much power.
at now truck has 4 rc buggy motors(with 2 speed gearbox) for drive,2 servo for steering and 2 sbricks to control everything.
photo 1

photo 2

 

Edited February 2, 2017 by Toni-23

[Toni-23]

hi!
thats my mod for  truck 
it was really slow and i add more power for it!
                         old version               new version
drive                 3 xl motors               4 rc buggy motors 
steering            1 m motor                 2 servo motors
controlled by     2 ir reciever             2 sbricks
power               1 li-po                       1 li-po
minimum weight
i hope ,you like new version)
https://youtu.be/DtzIOk3LQrs

[Imanol BB]

That is serious speed, and it is already a lot considering that the RC motors aren´t fully powered (yet, because of the single Li-Po), the modifications look really good so far, i hope to see more updates of this truck.

[Toni-23]

15 minutes ago, Imanol BB said:

That is serious speed, and it is already a lot considering that the RC motors aren´t fully powered (yet, because of the single Li-Po), the modifications look really good so far, i hope to see more updates of this truck.

thanks a lot!
i hope I record the new videos soon

[JJ2]

Nice upgrade, what Lipo did you use?

[Toni-23]

15 hours ago, JJ2 said:

Nice upgrade, what Lipo did you use?

this one
Art-Tech LiPo 7.4V 2S 1000mAh (JST)

photo

[Toni-23]

Hi!
Thats my 2 modifications for  truck
The truck became lighter and smaller (1870 grams now while the old version weighed more than 2 kg).
Technical specifications:
4 RC buggy motors for drive+gearbox(2 speeds)
1 Medium motor for steering
1 Medium motor for gear change
2 Sbricks
1 сustom li-po (2s,1000mAh)
6x6 wheel drive (with custom 108mm tires)
dependent suspension with portal axles(balanced rear suspension)
The video :

 

Edited May 1, 2017 by Toni-23