SylvainLS

More up-to-date ldraw.xml LDD/LDraw conversion file

Recommended Posts

Update 2019-06-01

Added:

  • 11255 / 11255.dat  Minifig, Hair Long with Curls
  • 11262 / 11262.dat  Minifig Headdress Chicken
  • 11263 / 11263.dat  Minifig Bird Wing
  • 17349 / 17349.dat  Minifig Hat Wizard without Brim
  • 20952 / 20952.dat  Brick Round  1 1/2 x  1 1/2 x  2/3 Dome Top
  • 20953 / 20953.dat  Brick Round  2 x  2 x  1 2/3 Sphere with Stud
  • 24074 / 24074.dat  Minifig Flipper
  • 24076 / 24076.dat  Minifig Headdress Shark with Tail and Fin
  • 25971 / 25971.dat  Minifig Headdress Bird
  • 29685 / 29685.dat  Animal Bunny
  • 42450 / 42450c01.dat  Minifig Cape Cloth with Pointed Ends and Collar (Formed)

Rematched:

  • 23816 / 23816c01.dat  Electric Power Functions 2.0 Plug with Black Cable Stub

Importable:

  • 23816.dat  ~Moved to 23816c01
  • 23816a.dat  Electric Power Functions 2.0 Plug
  • 23816c02.dat  Electric Power Functions 2.0 Plug with White Cable Stub
  • 35343.dat  =Slope Brick 50  1 x  1 x  0.667 Quadruple

md5sum: 0a312e57a047caa907a9b07a527ac077

Share this post


Link to post
Share on other sites

Update 2019-06-25

Added:

  • 24083 / 24083.dat  Minifig Leg Faun Left
  • 24082 / 24082.dat  Minifig Leg Faun Right
  • 25892 / 25892.dat  Minifig Boomerang

(Faun legs aligned with hips.  LDD’s hoof antistud is +1.25 LDU to the front more than LDraw’s.)

Corrected:

  • 30259 / 30259.dat  Roadsign Clip-on  2.2 x  2.667 Triangular  (now aligned on triangle, not clip)

Importable:

  • 34432.dat  =Technic Gear 40 Tooth
  • 35331.dat  =Windscreen  6 x  6 x  2

md5sum: 3dcc17b652e86940c4c62812b229c4fb

Share this post


Link to post
Share on other sites
6/25/2019 в 6:20 вечера SylvainLS сказал:

Обновление 2019-06-25

Добавлено:

  • 24083 / 24083.dat Minifig Leg Faun Left
  • 24082 / 24082.dat Minifig Leg Faun Right
  • 25892 / 25892.dat Минифиг Бумеранг

(Ноги Фавна выровнены с бедрами. Антистуд копыта LDD на +1.25 LDU вперед больше, чем у LDraw.)

Исправленный:

  • 30259 / 30259.dat Roadsign Клип 2.2 x 2.667 Треугольный  (теперь выровненный по треугольнику, а не по клипсе)

Импортируемое:

  • 34432.dat = зубчатое колесо Technic Gear 40
  • 35331.dat = ветровое стекло 6 х 6 х 2

md5sum: 3dcc17b652e86940c4c62812b229c4fb

Привет. Пожалуйста, спросите меня, как изменить проект ldd на ldraw? я действительно не могу сделать это = (спасибо

Share this post


Link to post
Share on other sites
19 hours ago, _Zhenya said:

Привет. Пожалуйста, спросите меня, как изменить проект ldd на ldraw? я действительно не могу сделать это = (спасибо

If I understand correctly, you’re asking how to convert an LDD project to LDraw.  You have several possibilities:

  • In LDD: File | Export model | choose LDraw file type (*.ldr).  Look at the first post of this thread to use the updated ldraw.xml.
  • Import in an LDraw CAD.
  • Or use lxf2ldr.html

Share this post


Link to post
Share on other sites
On 8/5/2019 at 11:05 PM, _Zhenya said:

Привет. Пожалуйста, спросите меня, как изменить проект ldd на ldraw? я действительно не могу сделать это = (спасибо

Can you please stick to English? :tongue:

Share this post


Link to post
Share on other sites

Update 2019-08-10

Added:

  • 19730 / 19730.dat  Minifig Helmet Square Head
  • 20455 / 20455.dat  Windscreen Hemisphere  9 x  4 x  7 with 4 Hollow Studs on Top
  • 28551 / 28551.dat  Minifig Hair Bushy Swept Back
  • 93575 / 93575.dat  Constraction Hand Clenched with Four Fingers and Axle Hole

Rematched:

  • 44567 / 44567b.dat  Hinge Plate  1 x  2 Locking without Groove with Single Finger On Side Vertical

Importable:

  • 445567.dat  ~Moved to 44567a
  • 44567a.dat  Hinge Plate  1 x  2 Locking without Groove with Single Finger On Side Vertical  

md5sum: 4cd142dd8c75cbcd7b2d0c77740f6c77
 

Share this post


Link to post
Share on other sites

Update 2019-09-12

Added:

  • 11439 / 11439.dat  Minifig Sword with Jagged Edges
  • 13786 / 13786.dat  Animal Cat Standing Looking Forward
  • 24779 / 24779.dat  Minifig Tail Duck  (funny bug: LDD only wants to connect it upside-down)

Rematched:

  • 30151 / 30151a.dat  Cylinder  2 x  2 x  1.667 with Dome Top
  • 44301 / 44301b.dat  Hinge Plate  1 x  2 Locking without Groove with Single Finger on End Vertical

Importable:

  • 30151.dat  ~Moved to 30151a
  • 44301.dat  ~Moved to 44301
  • 44301a.dat  Hinge Plate  1 x  2 Locking with Groove with Single Finger on End Vertical

md5sum: dec431d355293d9a630a406ccbb656c9

Share this post


Link to post
Share on other sites

Update 2019-10-03

Added:

  • 11062 / 11062.dat  Support  2 x  2 x  7 Lamppost with 4 Base Flutes
  • 13195 / 13195.dat  Minifig Head Yoda with Curved Ears Type 2
  • 15407 / 15407.dat  Minifig Hand Armour with Two Studs
  • 19179 / 19179.dat  Minifig Blade with Bar and Three Spikes
  • 28925 / 28925.dat  Boat Hull Floating 16 x  8 with Dark Bluish Grey Deck
  • 98341 / 98341.dat  Ring  4 x  4 with  2 x  2 Hole and 4 Arrow Ends
  • 98562 / 98562.dat  Constraction Chain Link with Peghole
  • 98564 / 98564.dat  Technic Bionicle Thornax Launcher Half  1 x  7
  • 98570 / 98570.dat  Constraction Shell Chest Badge "H" with  2 Bars

md5usm: 1ac670d442547dd3b80c13fa7c1624dd

 

Share this post


Link to post
Share on other sites

Update 2019-10-12

Added:

  • 20033 / 18913c01.dat  Boat Hull Floating 40 x 20 with Dark Bluish Grey Deck
  • 26056 / 26056.dat  Minifig Head Gremlin
  • 47298 / 47298.dat  Constraction Foot  3 x  7 x  2 with  3 Pegholes and Axle
  • 61200 / 61200.dat  Minifig Head Kel'Dor with Breathing Apparatus
  • 98593 / 98593.dat  Constraction Shell Decoration Sonic Speaker with  2 Bars

md5sum: 78296a494ff636323725092d24078c1f

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.