SylvainLS

More up-to-date ldraw.xml LDD/LDraw conversion file

Recommended Posts

Update 2019-06-01

Added:

  • 11255 / 11255.dat  Minifig, Hair Long with Curls
  • 11262 / 11262.dat  Minifig Headdress Chicken
  • 11263 / 11263.dat  Minifig Bird Wing
  • 17349 / 17349.dat  Minifig Hat Wizard without Brim
  • 20952 / 20952.dat  Brick Round  1 1/2 x  1 1/2 x  2/3 Dome Top
  • 20953 / 20953.dat  Brick Round  2 x  2 x  1 2/3 Sphere with Stud
  • 24074 / 24074.dat  Minifig Flipper
  • 24076 / 24076.dat  Minifig Headdress Shark with Tail and Fin
  • 25971 / 25971.dat  Minifig Headdress Bird
  • 29685 / 29685.dat  Animal Bunny
  • 42450 / 42450c01.dat  Minifig Cape Cloth with Pointed Ends and Collar (Formed)

Rematched:

  • 23816 / 23816c01.dat  Electric Power Functions 2.0 Plug with Black Cable Stub

Importable:

  • 23816.dat  ~Moved to 23816c01
  • 23816a.dat  Electric Power Functions 2.0 Plug
  • 23816c02.dat  Electric Power Functions 2.0 Plug with White Cable Stub
  • 35343.dat  =Slope Brick 50  1 x  1 x  0.667 Quadruple

md5sum: 0a312e57a047caa907a9b07a527ac077

Share this post


Link to post
Share on other sites

Update 2019-06-25

Added:

  • 24083 / 24083.dat  Minifig Leg Faun Left
  • 24082 / 24082.dat  Minifig Leg Faun Right
  • 25892 / 25892.dat  Minifig Boomerang

(Faun legs aligned with hips.  LDD’s hoof antistud is +1.25 LDU to the front more than LDraw’s.)

Corrected:

  • 30259 / 30259.dat  Roadsign Clip-on  2.2 x  2.667 Triangular  (now aligned on triangle, not clip)

Importable:

  • 34432.dat  =Technic Gear 40 Tooth
  • 35331.dat  =Windscreen  6 x  6 x  2

md5sum: 3dcc17b652e86940c4c62812b229c4fb

Share this post


Link to post
Share on other sites
6/25/2019 в 6:20 вечера SylvainLS сказал:

Обновление 2019-06-25

Добавлено:

  • 24083 / 24083.dat Minifig Leg Faun Left
  • 24082 / 24082.dat Minifig Leg Faun Right
  • 25892 / 25892.dat Минифиг Бумеранг

(Ноги Фавна выровнены с бедрами. Антистуд копыта LDD на +1.25 LDU вперед больше, чем у LDraw.)

Исправленный:

  • 30259 / 30259.dat Roadsign Клип 2.2 x 2.667 Треугольный  (теперь выровненный по треугольнику, а не по клипсе)

Импортируемое:

  • 34432.dat = зубчатое колесо Technic Gear 40
  • 35331.dat = ветровое стекло 6 х 6 х 2

md5sum: 3dcc17b652e86940c4c62812b229c4fb

Привет. Пожалуйста, спросите меня, как изменить проект ldd на ldraw? я действительно не могу сделать это = (спасибо

Share this post


Link to post
Share on other sites
19 hours ago, _Zhenya said:

Привет. Пожалуйста, спросите меня, как изменить проект ldd на ldraw? я действительно не могу сделать это = (спасибо

If I understand correctly, you’re asking how to convert an LDD project to LDraw.  You have several possibilities:

  • In LDD: File | Export model | choose LDraw file type (*.ldr).  Look at the first post of this thread to use the updated ldraw.xml.
  • Import in an LDraw CAD.
  • Or use lxf2ldr.html

Share this post


Link to post
Share on other sites
On 8/5/2019 at 11:05 PM, _Zhenya said:

Привет. Пожалуйста, спросите меня, как изменить проект ldd на ldraw? я действительно не могу сделать это = (спасибо

Can you please stick to English? :tongue:

Share this post


Link to post
Share on other sites

Update 2019-08-10

Added:

  • 19730 / 19730.dat  Minifig Helmet Square Head
  • 20455 / 20455.dat  Windscreen Hemisphere  9 x  4 x  7 with 4 Hollow Studs on Top
  • 28551 / 28551.dat  Minifig Hair Bushy Swept Back
  • 93575 / 93575.dat  Constraction Hand Clenched with Four Fingers and Axle Hole

Rematched:

  • 44567 / 44567b.dat  Hinge Plate  1 x  2 Locking without Groove with Single Finger On Side Vertical

Importable:

  • 445567.dat  ~Moved to 44567a
  • 44567a.dat  Hinge Plate  1 x  2 Locking without Groove with Single Finger On Side Vertical  

md5sum: 4cd142dd8c75cbcd7b2d0c77740f6c77
 

Share this post


Link to post
Share on other sites

Update 2019-09-12

Added:

  • 11439 / 11439.dat  Minifig Sword with Jagged Edges
  • 13786 / 13786.dat  Animal Cat Standing Looking Forward
  • 24779 / 24779.dat  Minifig Tail Duck  (funny bug: LDD only wants to connect it upside-down)

Rematched:

  • 30151 / 30151a.dat  Cylinder  2 x  2 x  1.667 with Dome Top
  • 44301 / 44301b.dat  Hinge Plate  1 x  2 Locking without Groove with Single Finger on End Vertical

Importable:

  • 30151.dat  ~Moved to 30151a
  • 44301.dat  ~Moved to 44301
  • 44301a.dat  Hinge Plate  1 x  2 Locking with Groove with Single Finger on End Vertical

md5sum: dec431d355293d9a630a406ccbb656c9

Share this post


Link to post
Share on other sites

Update 2019-10-03

Added:

  • 11062 / 11062.dat  Support  2 x  2 x  7 Lamppost with 4 Base Flutes
  • 13195 / 13195.dat  Minifig Head Yoda with Curved Ears Type 2
  • 15407 / 15407.dat  Minifig Hand Armour with Two Studs
  • 19179 / 19179.dat  Minifig Blade with Bar and Three Spikes
  • 28925 / 28925.dat  Boat Hull Floating 16 x  8 with Dark Bluish Grey Deck
  • 98341 / 98341.dat  Ring  4 x  4 with  2 x  2 Hole and 4 Arrow Ends
  • 98562 / 98562.dat  Constraction Chain Link with Peghole
  • 98564 / 98564.dat  Technic Bionicle Thornax Launcher Half  1 x  7
  • 98570 / 98570.dat  Constraction Shell Chest Badge "H" with  2 Bars

md5usm: 1ac670d442547dd3b80c13fa7c1624dd

 

Share this post


Link to post
Share on other sites

Update 2019-10-12

Added:

  • 20033 / 18913c01.dat  Boat Hull Floating 40 x 20 with Dark Bluish Grey Deck
  • 26056 / 26056.dat  Minifig Head Gremlin
  • 47298 / 47298.dat  Constraction Foot  3 x  7 x  2 with  3 Pegholes and Axle
  • 61200 / 61200.dat  Minifig Head Kel'Dor with Breathing Apparatus
  • 98593 / 98593.dat  Constraction Shell Decoration Sonic Speaker with  2 Bars

md5sum: 78296a494ff636323725092d24078c1f

Share this post


Link to post
Share on other sites

Update 2019-10-27

Added:

  • 18895 / 18895.dat  Bike  2 Wheel Motorcycle Fairing Racing
  • 41889 / 41889.dat  Minifig Body SW Super Battle Droid
  • 41890 / 41890.dat  Minifig Arm SW Super Battle Droid
  • 42687 / 42687.dat  Minifig Legs SW Super Battle Droid
  • 47299 / 47299.dat  Constraction Shell  2 x  3 x  1.5 with Peghole
  • 59278 / 59278c01.dat  Boat Hull Floating 72 x 18 with Dark Bluish Grey Deck
  • 64796 / 64796.dat  Minifig Arm SW Super Battle Droid with Blaster

Rematched (renamed):

  • 28925 / 28925c01.dat Boat Hull Floating 16 x  8 with Dark Bluish Grey Deck

md5sum: f5075ef624e2a008dd48ce2711d6b111

Share this post


Link to post
Share on other sites

Update 2019-12-01

Added:

  • 12622 / 12622.dat  Car Base  4 x 10 with Mudguards and Integral Plates with Wheel Pins
  • 19220 / 19220.dat  Minifig Radio with Large Grille
  • 93222 / 93222.dat  Minifig Tool Fishing Rod  8L Straight End
  • 96858 / 96858.dat  Minifig Tool Fishing Rod 10L Straight End
  • 98604 / 98604.dat  Constraction Shell  4 x 13 x  5 Breast Plate

Importable:

  • 57910.dat / 62712  Brick  2 x  2 with Ball Socket Type 1 and Axlehole

Rematched:

  • 47899 / 47899c01.dat  Door  1 x  4 x  5 Left with Trans Clear Glass
  • 73194 / 73194c01.dat  Door  1 x  4 x  5 Right with Trans Clear Glass

md5sum: 0c47e8ce2d00861008de1d628aa4053b

 

Share this post


Link to post
Share on other sites

Update 2019-12-16

Added:

  • 20597 / 20597.dat  Minifig Hair Short Tousled with Side Part and Lock Sticking Up
  • 23997 / 23997c01.dat  Boat Hull Floating 40 x 12 with Dark Bluish Grey Deck
  • 53989 / 53989.dat  Minifig Mechanical Arm with Clip and Rod Hole with Thick Forearm
  • 62792 / 62792.dat  Boat Hull Floating 51 x 12 with Side Bulges (Complete)
  • 93058 / 93058.dat  Minifig Weapon Three Pointed Throwing Star (Shuriken) with Smooth Grips
  • 95347 / 95347.dat  Support  2 x  2 x 10 Girder Triangular  3 Sections with Axlehole

Corrected (new versions):

  • 93222 / 93222.dat  Minifig Tool Fishing Rod  8L Clip at End
  • 96858 / 96858.dat  Minifig Tool Fishing Rod 12L Straight End

Importable:

  • 2563a.dat  Plant Tree Palm Base

md5sum: 27dfd1d5d27608ca242cf0e9b9363bf5

Share this post


Link to post
Share on other sites

Update 2019-12-18

Colours again.  (It only impacts hidden and rare colours.)

I decided to match LDD colours to “near-enough” existing LDraw colours when there’s no official match instead of trying to keep the same numbers.

Also for “near-enough,” instead of my eyes, I used the δE (CIE94) distance.

md5sum: a60c172f99497c17613effc7d2dc3745

 

Share this post


Link to post
Share on other sites

Update 2020-01-20

Added:

  • 16000 / 16000.dat  ~Minifig Arm Right Dual Mould
  • 16001 / 16001.dat  ~Minifig Arm Left Dual Mould
  • 20312 / 20312.dat  Animal Wing  4 x  7 Right with Feathers and Handle Bars
  • 20313 / 20313.dat  Animal Wing  4 x  7 Left with Feathers and Handle Bars
  • 21560 / 21560.dat  Constraction Shell  2 x  4 x  3.333 Shoulder Pad with 2 Bars
  • 23986 / 23986.dat  Minifig Teapot
  • 24055 / 24055.dat  Vehicle Base  4 x  6 x  1.667 Curved with Two Wheel Pins
  • 25376 / 25376.dat  Minifig Scarf Long Wrapped
  • 29634 / 29634.dat  Minifig Hair Female Very Curly - Parted in Middle
  • 33216 / 33216.dat  Door 1 x 4 x 11.3333 with Arched Top and Two Studs on Each Side
  • 60607 / 60607.dat  Window  1 x  2 x  3 Pane Latticed with Reinforced Joints
  • 95354 / 95354.dat  Boat Anchor with Two Top Holes

Importable:

  • 2536.dat  ~Plant Tree Palm Trunk (Obsolete)
  • 31561.dat  =Tile  1 x  1 Round with Pin and Pin Hole
  • 31570.dat  =Tile  1 x  1 Round with Pin and Pin Hole

md5sum: 28be5250ff6800771979091c1206715e

Share this post


Link to post
Share on other sites

Update 2020-02-02 twentytnewt

Added:

  • 10304 / 10304.dat  Container Minifig Coffin Lid Flat
  • 15536 / 15536.dat  Train Front  6 x 14 x  7.333
  • 15537 / 15537.dat  Glass For Train Front  6 x 14 x  7.333
  • 26066 / 26066.dat  Minifig Collar Fur
  • 55768 / 55768.dat  Train Front  6 x 14 x  7.667
  • 91968 / 91968c01.dat  Train Buffer Beam with Open Buffer Bottom for Sealed Magnet with Screw (Type 2)

md5sum: dfe93f47b149b50c5c1b205111a49043

Share this post


Link to post
Share on other sites

Update 2020-04-04

Added:

  • 11094 / 11094.dat  Wheel 30 / 64 with 7 Pin Holes and 6 Small Holes
  • 27256 / 27256.dat  Minifig Lightning Bolt with Rim
  • 29592 / 32765.dat  Minifig Sports Barbells
  • 90634 / 90634.dat  Technic Connector  3 x  1 with Two Pins and Three Ball Joints on Axle  5L
  • 93571 / 93571.dat  Technic Ball Socket Round  (name should be Constraction Connector 3 x 2 with Single Straight Ball Socket and Open Axle Holes)

Rematched (more modern variant):

  • 6014 / 6014b.dat  Wheel Rim 11.2 x 10.4 with Notched Hole
  • 3660 / 3660b.dat  Slope Brick 45  2 x  2 Inverted with Inner Stopper Ring

Corrected:

  • 20455 / 20455.dat  Windscreen Hemisphere  9 x  4 x  7 with 4 Hollow Studs on Top

Importable:

  • 3660.dat / 3660  ~Moved to to 3660a
  • 3660a.dat / 3660  Slope Brick 45  2 x  2 Inverted without Inner Stopper Ring
  • 28290.dat / 56890  =Tyre 12/ 61 x 11 Balloon
  • 6014a.dat / 6014  Wheel Rim 11.2 x 10.4 with Round Hole
  • 6014b.dat / 6014  Wheel Rim 11.2 x 10.4 with Notched Hole

md5sum: 0a4e842a0e1a0faf8ee9111f82a0ff33

Share this post


Link to post
Share on other sites

Update 2020-04-23

Added:

  • 18585 / 18585.dat  Technic Brick  2 x  4 with Holes and Launcher
  • 18590 / 18590.dat  Technic Gearwheel Z8 with Pin Holes, Flywheel Socket and Short Shaft
  • 20308 / 20308.dat  ~Animal Wolf Head Pixelated
  • 24073 / 24073.dat  Minifig Headdress Bandage Wrapped
  • 25977 / 25977.dat  Minifig Headdress Banana
  • 30924 / 30924.dat  Minifig Arm Bandage Wrapped
  • 93066 / 93066.dat  Minifig Head Skeleton with Stud

Rematched:

  • 3861 / 3861c.dat  Door  1 x  4 x  5 with 4 Panes and Reinforced Hinge
  • 63965a.dat / 64965  Bar  6L with Thick Stop

Importable:

  • 4207b.dat / 4207  Ladder  2.6 x 14 with Half-Bumps
  • 3861.dat / 3861  ~Moved to 3861c
  • 3861a.dat / 3861  Door  1 x  4 x  5 with 4 Panes and Two-way Hinge
  • 3861b.dat / 3861  Door  1 x  4 x  5 with 4 Panes and One-way Hinge
  • 63965.dat / 63965  ~Bar  6L with Thick Stop (Obsolete)

md5sum: cef45c26fc0ce5ee1aad5e3269dd7ddf

Share this post


Link to post
Share on other sites

Update 2020-05-10

Added:

  • 11126 / 11126.dat  Ripcord Flexible with Handle Thin for Chima Speedorz (91 Teeth)
  • 14397 / 14397.dat  Minifig Head Round  1.8 x  1.8 Biscuit with Filling
  • 16965 / 16965.dat  Ripcord Flexible with Handle Thick for Ninjago Airjitzu Flyers (70 Teeth)
  • 62575 / 23714.dat  Animal Ant
  • 93064 / 93064.dat  Minifig Head Skeleton with Five Spikes
  • 93065 / 93065.dat  Minifig Head Skeleton with Helmet

Rematched:

  • 3228 / 3228c.dat  Train Track Rail Straight Tapered
  • 29592 / 29592.dat  Minifig Sports Barbells  (renumbered)
  • 71591 / 71591.dat  Minifig Helmet Ninja Ornament
  • 93094 / 93094a.dat  Figure Friends Lipstick (Complete)  (renumbered)

Importable:

  • 529.dat / 71591  Minifig Helmet Samurai Horn
  • 25866.dat / 93094  Figure Friends Lipstick Dual Mould

md5sum: 8081909e7be5d2fb2370ae96486a3c73
 

Share this post


Link to post
Share on other sites

Update 2020-05-13

Added ( custom parts ):

  • 24855 / 24855.dat  Plant Flower Stem with Bar and Hole
  • 24866 / 24866.dat  Plate  1 x  1 with  5 Petals
  • 25059 / 25059.dat  Train Track Roller Coaster Straight 4 x 16
  • 25061 / 25061.dat  Train Track Roller Coaster Curve 90 Degrees Radius 12
  • 26021 / 26021.dat  Train Base  4 x  5 Roller Coaster
  • 26022 / 26022.dat  Train Track Roller Coaster Straight  4 x  8
  • 26559 / 26559.dat  Train Track Roller Coaster Ramp  4 x 16 x  6 S-Shape Lower
  • 26560 / 26560.dat  Train Track Roller Coaster Ramp  4 x 16 x  6 S-Shape Upper
  • 26561 / 26561.dat  Train Track Roller Coaster Ramp  4 x  8 x  6 Straight
  • 27448 / 27448.dat  Turntable Flat Base  2 x  2
  • 30034 / 30034.dat  Panel  3 x  5 Solar/Clip-On/Deltoid
  • 32606 / 32606.dat  Plant Flower with  7 Alternate Petals with Bar and Pin Hole
  • 32607 / 32607.dat  Plate  1 x  1 Round with  3 Leaves
  • 32802 / 32802.dat  Slope Brick 45  4 x  1 Double Inverted with Open Centre
  • 32803 / 32803.dat  Slope Brick Curved  2 x  2 Inverted
  • 34738 / 34738.dat  Train Track Roller Coaster Ramp  4 x 16 x  3 S-Shape
  • 35044 / 35044.dat  Plate  4 x  4 with  3 x  3 Quarter Circle Cutout
  • 35459 / 35459.dat  Tile  1 x  3 Inverted with Bar Hole
  • 35464 / 35464.dat  Slope Brick 45  1 x  1 Double
  • 35480 / 35480.dat  Plate  1 x  2 with Round Ends and 2 Open Studs
  • 35574 / 35574.dat  Beehive
  • 35660 / 35660.dat  ~Minifig Hair with Ponytail and Baseball Cap
  • 35787 / 35787.dat  Tile  2 x  2 Triangular
  • 35789 / 35789.dat  Car Mudguard  4 x  2.5 x  2 with Rounded Ends
  • 36840 / 36840.dat  Bracket  1 x  1 -  1 x  1 Up
  • 36841 / 36841.dat  Bracket  1 x  1 -  1 x  1 Down
  • 37195 / 37195.dat  Wheel Cover 28 Spoke for Wheel 20 x 30
  • 37352 / 37352.dat  Brick  1 x  2 with Curved Top without Understud
  • 37494 / 37494.dat  Train Pantograph Shoe without Hinge
  • 37695 / 37695.dat  Plant Stem with  3 Leaves with Bar and Pin Holes
  • 37762 / 37762.dat  Cylinder  1 x  1.333 with  0.5L Bar and Bar Hole
  • 37775 / 37775.dat  Minifig Candle Flame
  • 37776 / 37776.dat  Minifig Lantern
  • 38014 / 38014.dat  Minifig Cup with Bar Handle
  • 38320 / 38320.dat  Window  1 x  2 x  2 Pane Lattice Diamond
  • 38583 / 38583.dat  Brick  1 x  1 with Half Arch on Opposite Sides
  • 38585 / 38585.dat  Brick  1 x  1 with Half Arch on Two Adjacent Sides
  • 38799 / 38799.dat  Minifig Saucer with Hollow Stud on Top
  • 41682 / 41682.dat  Bracket  2 x  2 -  1 x  2 Up Centred
  • 41740 / 41740.dat  Plate  1 x  4 with Two Studs and Groove
  • 41948 / 41948.dat  Plate  8 x  8 with Rounded End
  • 42716 / 42716.dat  Wheel Rim 20 x 30 "Torq Thurst" with  5 Spokes and External Ribs
  • 42862 / 42862.dat  Wedge  3 x  3 Sloped Left
  • 42918 / 42918.dat  Slope Brick Curved  8 x  2
  • 48165 / 48165.dat  Wedge  3 x  3 Sloped Right
  • 48205 / 48205.dat  Wing  4 x  6 Right
  • 48208 / 48208.dat  Wing  4 x  6 Left
  • 49097 / 49097.dat  Car Mudguard  3 x  2.5 x  1
  • 49098 / 49098.dat  Wheel Rim 11 x 18 Side with Tyre Widener
  • 49307 / 49307.dat  Brick  1 x  1 x  0.667 with Curved Top
  • 49308 / 49308.dat  Cylinder  3 x  3 with Dome Top with Open Stud
  • 49309 / 49309.dat  Cone  2 x  2 x  2 Inverted
  • 49311 / 49311.dat  Brick  1 x  4 x  3
  • 49618 / 49618.dat  Slope Brick 33  8 x  1 x  3
  • 51270 / 51270.dat  Plant Pumpkin
  • 64570 / 64570.dat  Bracket  2 x  6 -  1 x  6 Up with Rounded Corners
  • 65426 / 65426.dat  Wing  2 x  4 Right With Shortened Tip
  • 65429 / 65429.dat  Wing  2 x  4 Left With Shortened Tip
  • 65581 / 65581.dat  Minifig Lantern Spherical with Large Round Handle
  • 65632 / 65632.dat  Windscreen  6 x  6 x  1.667 Curved
  • 65633 / 65633.dat  Windscreen  6 x  6 x  1.333 Angled Curved
  • 65634 / 65634.dat  Car Base  6 x 12 with 6 Studs on Each Side
  • 65635 / 65635.dat  Plate  2 x  6 with Side Bricks  1 x  2 x  1.333 with Axlehole
  • 65734 / 65734.dat  Brick  1 x  4 x  2.667 Curved Top
  • 65735 / 65735.dat  Windscreen  1 x 10 x  4
  • 66727 / 66727.dat  Wheel Rim 11 x 18 with Drilled Disc Brake
  • 189781 / 18978a.dat  Wheel Rim 11 x 18 Front with  5 Spokes
  • 189782 / 18978b.dat  Wheel Rim 11 x 18 Front with 10 Angled Spokes
  • 189791 / 18979a.dat  Wheel Rim 11 x 18 Front with 7 Y-Shaped Spokes
  • 189792 / 18979b.dat  Wheel Rim 11 x 18 Front with 10 Spokes
  • 243081 / 24308a.dat  Wheel Rim 11 x 18 Front with 10 Parallel Spokes
  • 243082 / 24308b.dat  Wheel Rim 11 x 18 Front with 10 Y-Spokes
  • 291171 / 29117a.dat  Wheel Rim 11 x 18 Front with 5 Wide Spokes
  • 291172 / 29117b.dat  Wheel Rim 11 x 18 Front with 5 Split Spokes
  • 377201 / 37720a.dat  Animal Bat Emblem 3 x 4
  • 377202 / 37720b.dat  Animal Bat Emblem 1 x 2
  • 377203 / 37720c.dat  Animal Bat Emblem 1 x 2
  • 377204 / 37720d.dat  Minifig Bar 0.8L with Tip Bat Emblem
  • 377205 / 37720e.dat  Animal Bat Emblem 2 x 5
  • 611901 / 61190c.dat  Minifig Armour SW Clone Trooper Tasset
  • 611902 / 61190b.dat  Minifig Armour SW Clone Trooper Pauldron
  • 611903 / 61190f.dat  Minifig Helmet Visor SW Clone Trooper
  • 611906 / 61190a.dat  Minifig Gun SW Small Blaster DC-17
  • 626981 / 62698-f2.dat Minifig Computer Laptop (Open)
  • 626982 / 62698-f3.dat Minifig Computer Laptop (Closed)

Added but commented (already matched):

  • 611904 / 61190d.dat  Minifig Helmet Rangefinder for SW Clone Trooper Helmet  (already matched to 63586)
  • 611905 / 61190e.dat  Minifig Helmet Floodlight for SW Clone Trooper Helmet  (already matched to 63585)

md5sum: 5c58a7076d49f00b3528d3de4ba4aaf5
 

Share this post


Link to post
Share on other sites

Update 2020-05-14

Added Custom Parts:

  • 2337 / 2337.dat  Windscreen  4 x  4 x  2 Canopy Extender
  • 4508 / 4508.dat  Turntable  2 x  2 Plate Base with Hinge
  • 26073 / 26073.dat  Minifig Backpack with Three Pouches and Bedroll
  • 34732 / 34732.dat  Panel  1 x  4 x  6 Wavy
  • 35366 / 35366.dat  Bar  2.4 x  5.4 Square
  • 35646 / 35646.dat  Rock  1.25 x  1.25 x  1.2 Nugget
  • 35654 / 35654.dat  Bar  1 x  4 x  2.5 Grille
  • 39739 / 39739.dat  Tile  1 x  1 Heart Shape
  • 45755 / 45755.dat  Minifig Headdress Circular Slice 60 Degrees
  • 51283 / 51283.dat  Minifig Helmet Round Fishbowl

Importable:

  • 90463.dat  Minifig Tool Magnifying Glass with Removable TransClear Lens

md5sum: 6a9cac09ac3ce36443005dfd79c3137d
 

Edited by SylvainLS

Share this post


Link to post
Share on other sites

Update 2020-05-20

Added:

  • 98139 / 98139.dat  Minifig, Weapon Sai

Added Custom parts:

  • 2101 / 210h.dat  Baseplate 16 x 22
  • 2711 / 2711.dat  Technic Rotor  2 Blade with 2 Studs
  • 3144 / 3144.dat  Antenna  5H with Side Spokes
  • 3334 / 3334.dat  Baseplate 16 x 24
  • 3481 / 3481.dat  Plate  2 x  2 with Helicopter Tail Rotor Holder
  • 3497 / 3497.dat  Baseplate  8 x 24
  • 3671 / 367.dat  Baseplate 24 x 24 with Studs on 3 Sides
  • 4187 / 4187.dat  Baseplate  8 x 32
  • 4263 / 4263.dat  Technic Plate  1 x  4 with Holes
  • 25195 / 25195.dat  Plate  2 x  6 with Pole Holder Pin
  • 28618 / 28618.dat  =Minifig Flame with Rim
  • 30010 / 30010.dat  =Panel  1 x  2 x  1 with Square Corners
  • 30073 / 30073.dat  Door  1 x  6 x  8 Left with Window
  • 30074 / 30074.dat  Door  1 x  6 x  8 Right with Window
  • 35188 / 35188.dat  Technic Changeover Rotary Catch
  • 35442 / 35442.dat  Plate Gear  6 Tooth  2 x  2
  • 35443 / 35443.dat  Plate Gear 10 Tooth  4 x  4
  • 35446 / 35446.dat  Plate Gear 14 Tooth  6 x  6
  • 35649 / 35649.dat  Tile  1.5 x  2 Diamond Shaped with Chamfered Edges
  • 35700 / 35700.dat  Container  2 x  2 x  1 Crate
  • 36036 / 36036.dat  Minifig Skirt
  • 36752 / 36752a.dat  Minifig Tool Wand
  • 38391 / 3839a.dat  Plate  1 x  2 with Handles Type 1
  • 39611 / 39611.dat  Plate  4 x  4 x  0.667 with Five Point Star Shape
  • 39789 / 39789.dat  Brick  2 x  4 with  3 Axleholes Vertical
  • 39802 / 39802.dat  ~Minifig Axe with Pick End and Long Handle
  • 40811 / 4081a.dat  Plate  1 x  1 with Clip Light Type 1
  • 41812 / 41812.dat  Projectile Launcher  4 x  2 x  1 with Bottom Axle
  • 41823 / 41823.dat  Fence Ornamental  3 x  3 x  2 Quarter Round with 2 Studs
  • 43045 / 43045.dat  Hinge Plate  2 x  4.5 Top with Technic Pin Hole and  2 Holes
  • 43056 / 43056.dat  Hinge Plate  2 x  4.5 Base with Technic Pin Hole and  2 Holes
  • 43745 / 43745.dat  Minifig Head Elf
  • 44709 / 44709.dat  Minifig Gun Blaster with Studs on Sides, Bottom and Front
  • 46524 / 46524.dat  Electric Light & Sound Brick  2 x  6 with Silver Button and Black Base
  • 48995 / 48995.dat  Tile  2 x  3 Rounded with Hole
  • 51239 / 51239.dat  Window  1 x  3 x  3 Frame
  • 51266 / 51266.dat  Glass for Window  1 x  3 x  3
  • 52985 / 52985.dat  Tyre 27/ 48 x 43
  • 53119 / 53119.dat  Plate  1 x  1 with Swirl on Top
  • 57915 / 57915.dat  Boat Hull Hovercraft
  • 98107 / 98107.dat  Hemisphere 11 x 11 with Studs on Top
  • 500181 / 50018a.dat  Plate  1 x  1 Hexagonal with Studs on Both Sides and 3 Bars at 120 Degrees
  • 500182 / 50018b.dat  Minifig Gun with Studs on Two Sides with Back Handle
  • 500183 / 50018c.dat  Bar with Orthogonal Hollow Stud and Bar
  • 500184 / 50018d.dat  Bar with Octagonal  1 x  1 Plate with Opposing Studs and Bar at 90 Degrees
  • 500185 / 50018e.dat  Bar with 8-Shaped Modified Plate with Offset Stud
  • 500186 / 50018f.dat  Minifig Bowl  1.5 x  1.5 with Three Ribs and Hollow Stud
  • 500187 / 50018g.dat  Minifig Tool Circular Saw with Cover with Bar and Two Studs at Centre

Rematched (all the new LDraw parts use these versions): (to better import newer assemblies)

  • 3015 / 3815b.dat  Minifig Hips
  • 3016 / 3816b.dat  Minifig Leg Right
  • 3017 / 3817b.dat  Minifig Leg Left

Importable:

  • 3015.dat / 3815  Minifig Hips
  • 3016.dat / 3816  Minifig Leg Right
  • 3017.dat / 3817  Minifig Leg Left
  • 28621.dat / 3626  Minifig Head with Vented Stud
  • 21019.dat / 21019  ~Minifig Hips and Legs Dual Mould with Uncoloured Lower Leg Pattern

Importable (rematched to Custom parts):

  • 4865.dat / 30010  ~Moved to 4865a
  • 4865a.dat / 30010  Panel  1 x  2 x  1 with Square Corners
  • 432.dat / 28618  ~Moved to 6126
  • 6126b.dat / 28618  Minifig Flame with Rim

Importable (Custom part):

  • 251.dat / 4508  ~Moved to 4508

Importable assembly:

  • 34412  MINI UPPER P. W/ARM COR.KNOB (torso w/ 34335 RIGHT MINI ARM, NO. 145)

md5sum: 9fd0668b58cc304f6d01273e6be1bfbc

Share this post


Link to post
Share on other sites

Update 2020-05-21

Added:

  • 19917 / 19917.dat  Minifig Collar SW Darth Vader Helmet Bottom

Added Custom parts:

  • 2145 / 2145.dat  Arch  2 x  6 x  5 Ornamented
  • 4169 / 4169.dat  Train Signal Stand
  • 4743 / 4743.dat  Arch  2 x  8 x  3
  • 51542 / 51542.dat  Baseplate 32 x 48 Raised with Level Front

Rematched:

  • 11187 / 11187a.dat  Minifig Snowshoe with Short Toe Webbing

Importable:

  • 109.dat / 2910  ~Moved to 2910
  • 298.dat / 4592  ~Moved to 4592
  • 732.dat / 4255  ~Moved to 4255
  • 970.dat / 3815  ~Moved to 3815
  • 971.dat / 3816  ~Moved to 3816
  • 972.dat / 3817  ~Moved to 3817
  • 981.dat / 3819  ~Moved to 3819
  • 982.dat / 3818  ~Moved to 3818
  • 983.dat / 3820  ~Moved to 3820
  • 11187.dat / 30284  =Minifig Snowshoe
  • 14533.dat / 90640  =Constraction Shell  2.5 x  3 x  4 Flat
  • 24505.dat / 3648  =Technic Gear 24 Tooth with Single Axle Hole
  • 28263.dat / 11187 =Minifig Snowshoe with Short Toe Webbing
  • 30058.dat / 2507  =Windscreen 10 x  4 x  2.333 Canopy
  • 31520.dat / 98585  =Technic Connector Circular with  2 Pin Holes and  3 Axle Holes
  • 35252.dat / 30292  Flag  8 x  3 with Rod without Reinforced Base and Flat Sides
  • 35327.dat / 21599  =Dish  6 x  6 Inverted With Solid Studs
  • 53933.dat / 30293  Rock  4 x  4 x  1.333 Top Bicoloured with Dark_Bluish_Grey Upper
  • 53934.dat / 30294  Rock  4 x  4 x  1.667 Bottom Bicoloured with Dark_Bluish_Grey Base
  • 55709.dat / 32199  =Technic Axle Flexible 11
  • 57488.dat / 32558  =Technic Flame  2 x 12
  • 61053.dat / 89650  Constraction Connector  5 x  2 with Double Angled Ball Sockets and Closed Axle Holes
  • 70358.dat / 590  ~_Electric Train Motor 9V (Complete) Black (Obsolete)
  • 71014.dat / 44493  ~_Minifig Sword Greatsword Chrome Silver (Obsolete)
  • 71182.dat / 71606  ~_Car Air Horn Chrome Silver (Obsolete)
  • 71874.dat / 4740  ~_Dish  2 x  2 Inverted Chrome (Obsolete)

Importable (digital bricks / may be used in Studio):

  • 10487.dat / 10487  TOWER ROOF W. TILES (Needs Work)
  • 18306.dat / 18306  HORSE, SADDLE (Needs Work)
  • 19063.dat / 19063  PAVILION 6X3X5 (Needs Work)
  • 24458.dat / 24458  FIGURE, HEAD CLOTHING, NO. 7 (Needs Work)
  • 25194.dat / 25194  FIGUR HEAD NO.1 (Needs Work)
  • 28174.dat / 28174  CRANE ARM 16M, W/ DIA. 4,85 (Needs Work)
  • 28670.dat / 2744  WING 1X6X1 2/3, W/ 4.85 HOLE (Needs Work)
  • 28791.dat / 28791  MINI EQUIPMENT, NO. 2 (Needs Work)
  • 31493.dat / 32064  BRICK 1X2 WITH CROSS HOLE (Needs Work)
  • 88490.dat / 88490  MINI FEATHER (Needs Work)

md5sum: 66d2ec27ed8d01694a4a7b3700c29af8

Share this post


Link to post
Share on other sites

Update 2020-05-24

Added:

  • 10303 / 10303.dat  Minifig Arm Bat Wing
  • 13543 / 13543.dat  Minifig Baseball Glove
  • 18841 / 18841.dat  Cylinder  2 x  2 with Dome Top with Hollow Stud and Bottom without Axle Holder
  • 34335 / 34335.dat  Minifig Arm Robotic with Blaster Socket
  • 62691 / 62691.dat  Minifig Arm Robot with Hollow Stud
  • 95320 / 95320.dat  Minifig Boxing Glove Left
  • 95321 / 95321.dat  Minifig Boxing Glove Right

Importable:

  • 14918 / 14918.dat  =Cone 2 x 2 x 2 with Hollow Stud Open

Added Custom parts:

  • 1104 / 104.dat  Antenna  6H
  • 2557 / 2557c01.dat  Boat Bow 16 x 12 x  5.333 with Brown Bottom
  • 2559 / 2559c01.dat  Boat Stern 16 x 14 x  5.333 with Brown Bottom
  • 2623 / 2623.dat  Boat Top  8 x 10
  • 3358 / 3358.dat  Gate  1 x  3 x  2
  • 3359 / 3359.dat  Gate  1 x  3 x  2 Base
  • 3612 / 412.dat  Arm Piece with 2 and 3 Fingers Rotated
  • 3613 / 3613.dat  Arm Piece with Towball Socket
  • 4318 / 4318.dat  Boat Mast Hinged with 2 Fingers on Both Sides
  • 6051 / 6051c01.dat  Boat Bow 12 x 12 x  5.333 with Brown Bottom
  • 6053 / 6053c01.dat  Boat Stern 12 x 14 x  5.333 with Brown Bottom
  • 6054 / 6054.dat  Boat Base  8 x 12
  • 6085 / 6085.dat  Cockpit  8 x  5 x  3
  • 28974 / 28974.dat  Bracket  1 x  1 -  1 x  1 Thick with Stud Hole
  • 29096 / 29096.dat  Cone Half 10 x  5 x  6
  • 30014 / 30014.dat  Brick  1 x  2 with Arm (2 Fingers)
  • 30082 / 30082.dat  Arm Piece with Towball and Clip
  • 30219 / 30219.dat  Bar 16L with Hollow Studs, Towball and Slit
  • 30271 / 30271.dat  Baseplate 32 x 48 Raised with Corner Pits
  • 30298 / 30298.dat  Windscreen 10 x 14 x  2.667 Roll Cage
  • 30348 / 30345c01.dat  Electric Light and Sound Brick  4 x 12 x  2 Laser Drill
  • 30371 / 30371.dat  Minifig Head Gungan with Split Eyes
  • 30619 / 30619.dat  Cockpit  6 x  6 x  2.667 with Click Hinge
  • 35485 / 35485.dat  Minifig Chakram
  • 39262 / 39262.dat  Minifig Crown with 5 Points
  • 71183 / 71183.dat  Bar  1L with Light Holder
  • 71184 / 71184.dat  Bar  4.5L Straight

md5sum: 16ecbf0c59b1cc973217bcb386d3cd5b

Share this post


Link to post
Share on other sites

Update 2020-06-12

Added:

  • 4156 / 4156.dat  Minifig Garrison Cap
  • 6030 / 6030.dat  Minifig Mask Islander
  • 10113 / 10113.dat  Minifig Headdress Batman with Angular Ears
  • 19916 / 19916.dat  Minifig Helmet SW Darth Vader Upper Part  (beware to correctly place the head in LDD)
  • 42938 / 42938.dat  Car Track 16 x  8 x  2 Turn  (LDD part is ~0.4LDU too short.)
  • 42941 / 42941.dat  Car Track 16 x  8 x  2 Y-Forgening
  • 42942 / 42942.dat  Car Track 16 x  8 x  2 Ramp Height 4
  • 92547 / 92547.dat  Spinner Ninjago  6 x  6 x  1.333 Type 1
  • 98381 / 98381.dat  Minifig Hat Flat Chef

Added Custom parts:

  • 28802 / 28802.dat  Bracket  1 x  2 -  1 x  4 with Rounded Bottom Corners

Corrected:

  • 40386 / 40386.dat  Animal Dinosaur Flipper with Pin
  • 55704 / 55704.dat  Minifig Headdress Batman

Importable:

  • 2454a.dat / 2454  Brick  1 x  2 x  5 with Hollow Studs and Asymmetric Inner Ridge
  • 2454b.dat / 2454  Brick  1 x  2 x  5 with Blocked Open Studs and Symmetric Inner Ridges
  • 2654b.dat / 2654  Dish  2 x  2 without Rim

md5sum: 1a5788129540c2d78f57ff38a6613c91
 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.