SylvainLS

More up-to-date ldraw.xml LDD/LDraw conversion file

Recommended Posts

Update 2020-06-18

Corrected:

  • 62275.dat / 62275  ~Technic Linear Actuator  8 x  2 x  2 Piston  (remove 1 LDU gap with Head)
  • Torso assemblies

Importable: 

  • 35298.dat / 62360  =Windscreen  3 x  6 x  1 Curved with Bottom Rectangular Stud Holder
  • 35299.dat / 62360  Windscreen  3 x  6 x  1 Curved with Bottom Rectangular Stud Holder

Added Custom parts:

  • 35186 / 35186.dat  Technic Transmission Driving Ring Extension with Eight Clutch Teeth
  • 35189 / 35189.dat  Technic Steering Wheel Hub with Brake Disc and  3 Pegholes
  • 39367 / 39367p01.dat  Wheel 14 x 48 with 4 Spokes with Integral Medium Azure Tyre
  • 66606 / 66606.dat  Panel Cone  4 x  6 x 10 Elliptic Parabolic

Note:  The custom version of 32235 is flexible, that means LDD doesn’t export nor import it anymore.  (LDD doesn’t convert flexible parts.)

md5sum: 6bfabef025776a883e309fc5193980ff

Edited by SylvainLS

Share this post


Link to post
Share on other sites

Update 2020-06-23

Added:

  • 43086 / 43086.dat  Panel Ramp Curved Turn 16 x 16 x  6

Added Custom parts:

  • 2619 / 2619.dat  Monorail Motor Box
  • 2670 / 2670.dat  Monorail Track Straight  4 x  8
  • 2671 / 2671.dat  Monorail Track Straight  4 x 32
  • 2672 / 2672.dat  Monorail Track Curve Quarter
  • 2677 / 2677.dat  Monorail Track Ramp Lower Section
  • 2678 / 2678.dat  Monorail Track Ramp Upper Section
  • 2681 / 2681.dat  Support  6 x  6 x 10 Stanchion
  • 2687 / 2687.dat  Monorail Base  4 x 20
  • 2891 / 2891.dat  Monorail Track Curve Short Right
  • 2892 / 2892.dat  Monorail Track Curve Short Left
  • 35185 / 35185.dat  Technic Gear 20 Tooth Double Bevel with Clutch on Both Sides
  • 42531 / 42531.dat  Technic Panel  9 x  2 x  3 Mudguard Arched #30
  • 42545 / 42545.dat  Technic Panel 13 x  2 x  5 Mudguard Arched #31
  • 53178 / 53178.dat  Technic Pneumatic Cylinder Bracket

Added Custom assemblies:

(Remember that one should use the correct subparts in the LDraw model for assemblies to be importable.  Even though, some of these won’t be importable due to the way they were divided.)

  • 19474 / 19474-f1.dat  Technic Pneumatic Valve with Axle Hole (Neutral Position)
  • 19475 / 19475-f1.dat  Technic Pneumatic Cylinder  1 x  5 with  2 Ports with Stepped Outlets (Retracted)
  • 19476 / 19476-f1.dat  Technic Pneumatic Cylinder  1 x 11 with  2 Ports with Stepped Outlets (Retracted)
  • 19478 / 19478-f1.dat  Technic Pneumatic Cylinder  2 x 11 with  2 Ports with Stepped Outlets (Retracted)
  • 19482 / 19482-f1.dat  Technic Pneumatic Pump  1 x  1 x  6 with Stepped Outlet (Retracted)
  • 26288 / 26288c01-f1.dat  Technic Pneumatic Pump  2 x  2 with  3L Beam (Retracted)
  • 47223 / 47223a-f1.dat  Technic Pneumatic Valve with Pegholes (Complete - Neutral Position)
  • 74982 / 74982-f1.dat  Technic Pneumatic Pump  1 x  1 x  5.5 (Retracted)
  • 268400 / 2684c01.dat  Monorail Motor with White Motor Unit (Complete)
  • 268600 / 2686c01.dat  Monorail Wheel Chassis Assembly (Complete)
  • 277400 / 74013.dat  Monorail Stop/Go Switch
  • 279300 / 2793c01-f1.dat  Technic Pneumatic Cylinder  2 x  2 x  5 with 2 Ports (Retracted)
  • 279700 / 2797c01-f01.dat  Technic Pneumatic Pump  2 x  2 x  5 with Large Knob (Retracted)
  • 288900 / 74780-f1.dat  Monorail Track Point Right - Straight
  • 289000 / 74781-f1.dat  Monorail Track Point Left - Straight
  • 324960 / 32495c01.dat  Technic Wheel Spindle Steering Arm (Complete)
  • 469400 / 4694c01-f1.dat  Technic Pneumatic Valve (Complete - Neutral Position)
  • 472240 / 47224c01-f1.dat  Technic Pneumatic Cylinder  2 x  2 x  5 with Curved Base (Retracted)

Modified Custom parts:

  • 35186  Technic Transmission Driving Ring Extension with Eight Clutch Teeth
  • 35188  Technic Changeover Rotary Catch
  • 41682  Bracket  2 x  2 -  1 x  2 Up Centred

md5sum: 2f7106d220b2900438d213cea7a4ea6c

 

Share this post


Link to post
Share on other sites

Update 2020-07-06

Added:

  • 23860 / 23860.dat  Minifig, Weapon Blade Faceted 3.8L with Bar 0.5L
  • 93096 / 93096.dat  Door  1 x  5 x  3 with 3 Studs and Vertical Handle

Added Custom Parts:

  • 35563 / 35563.dat  Cone  4 x  2 x  4 Half with Roof Tiles
  • 39790 / 39790.dat  Technic Beam 15 x 11 with Open Center 13 x  9
  • 39794 / 39794.dat  Technic Beam 11 x  7 with Open Center  9 x  5

Corrected Custom Assemblies (new versions):

  • 19475  Technic Pneumatic Cylinder  1 x  5 with  2 Ports with Stepped Outlets
  • 19478  Technic Pneumatic Cylinder  2 x 11 with  2 Ports with Stepped Outlets
  • 19482  Technic Pneumatic Pump  1 x  1 x  6 with Stepped Outlet
  • 26288  Technic Pneumatic Pump  2 x  2 with  3L Beam
  • 74982  Technic Pneumatic Pump  1 x  1 x  5.5
  • 268400  Monorail Motor with White Motor Unit
  • 268600  Monorail Wheel Chassis Assembly
  • 277400  Monorail Stop/Go Switch
  • 279700  Technic Pneumatic Pump  2 x  2 x  5 with Large Knob
  • 288900  Monorail Track Point Left
  • 289000  Monorail Track Point Right

md5sum: 1dcaa9d55d014bbdd3f93499520e308b
 

Share this post


Link to post
Share on other sites

Update 2020-07-16

Added:

  • 18859 / 18859.dat  Dish  8 x  8 Inverted with Hollow Studs
  • 98338 / 98338.dat  Minifig Weapon Spear Short with Pin Hole

Added Custom Parts:

  • 24869 / 24869.dat  Wheels Roller Coaster
  • 39793 / 39793.dat  Technic Connector Block  3 x  3 with  9 Perpendicular Holes
  • 65416 / 65416.dat  Technic Brake Disc  6 x  6
  • 67329 / 67329.dat  Brick  1 x  2 x  1.667 with 8 Studs on 3 Sides
  • 67810 / 67810.dat  Brick 2 x  2 x  1.333 with Curved Corner Top
  • 405983 / 40598c.dat  Minifig Weapon Grenade with Large Tapered Top and Four Indents
  • 405984 / 40598d.dat  Minifig Weapon Grenade with Small Tapered Top and Two Ridges

Corrected Custom Parts (new versions):

  • 39790 / 39790.dat  Technic Beam 15 x 11 with Open Center 13 x  9
  • 39794 / 39794.dat  Technic Beam 11 x  7 with Open Center  9 x  5

md5sum: fd79f4c22d4d6205960613319418d7e6

Share this post


Link to post
Share on other sites

Update 2020-08-04

Added:

  • 98279 / 98279.dat  Minifig  Campaign Hat

Rematched:

  • 4209 / 4209a.dat  Hose Reel  2 x  4 x  2 Holder

Importable:

  • 4209.dat / 4209  ~Moved to 4209a
  • 4209b.dat / 4209  Hose Reel  2 x  4 x  2 Holder with Hollow Studs
  • 28686.dat / 30293  =Rock  4 x  4 x  1.333 Top
  • 28696.dat / 30294  =Rock  4 x  4 x  1.333 Bottom

md5sum: bafe86dbe2c4f9cb571b2a9905d8eb3a

Share this post


Link to post
Share on other sites

Update 2020-08-04b

Added Custom parts:

  • 15522 / 15522.dat  Minifig Head Simpsons Marge Simpson
  • 15523 / 15523.dat  Minifig Head Simpsons Bart Simpson
  • 15524 / 15524.dat  Minifig Head Simpsons Lisa Simpson
  • 15525 / 15525.dat  Minifig Head Simpsons Maggie Simpson
  • 15527 / 15527.dat  Minifig Head Simpsons Homer Simpson
  • 22969 / 22969.dat  Wheel 56 x 46 Technic Racing
  • 32296 / 32296.dat  Tyre 50/ 29 x 54 Technic Racing
  • 32298 / 32298.dat  Tyre 61/ 41 x 54 Off Road
  • 46334 / 46334.dat  Wheel 17 x 75 Motorcycle Solid (needs Work)
  • 46335 / 46335.dat  Tyre 38/  22 x 75 Mock-Up (needs work)
  • 65617 / 65617.dat  Brick  3 x  3 x  1 Corner Round with Curved Top
  • 67140 / 67140.dat  Tyre 28/ 48 x 75 Motorcycle with Racing Tread

Modified Custom parts:

  • 35442 / 35442.dat  Plate Gear  6 Tooth  2 x  2
  • 377203 / 37720c.dat  Animal Bat Emblem 1 x 2

md5sum: 4c10ab4bae81cef8736bb554e0d2a86b
 

Share this post


Link to post
Share on other sites

Update 2020-08-05

Rematched:

  • 62808 / 40359a.dat  Minifig Key

Importable:

  • 62808.dat / 62808  ~Moved to 40359a

Added Custom Parts:

  • 46834 / 46834.dat  Technic Clutch with Axle Connector Outer Side
  • 46835 / 46835.dat  Technic Clutch with Axle Connector Inner Side
  • 46882 / 46882.dat  Technic Panel 15 x  2 x  7 Mudguard with Trapezoidal Arch
  • 65413 / 65413.dat  Technic Gear 28 Tooth Double Bevel with Peghole
  • 65414 / 65414.dat  Technic Differential Casing for 5 Internal Gears

Modified Custom Part:

  • 22969 / 22969.dat  Wheel 56 x 46 Technic Racing

Added Custom Assemblies:

  • 40918 / 40918-f1.dat  Technic Linear Actuator 12 x  2 x  2 (Contracted)

Note on Customized Part:

  • 47996  Boat Rigging  4 x 28 Rectangular  is now flexible, and therefore LDD won’t convert it.  lxf2ldr will convert it without flexing it as the part isn’t in LSynth.

md5sum: 1103713abeaf19fbdccedf003e5a0088

Edited by SylvainLS

Share this post


Link to post
Share on other sites

Update 2020-08-20

Rematched:

  • 2454 / 2454b.dat  Brick  1 x  2 x  5 with Blocked Open Studs and Symmetric Inner Ridges
  • 3755 / 3755a.dat  Brick  1 x  3 x  5 without Inner Ridges

Importable:

  • 2454.dat / 2454  ~Brick  1 x  2 x  5 (Obsolete)
  • 3755.dat / 3755  ~Moved to 3755a
  • 46212a.dat / 2454  Brick  1 x  2 x  5 with Hollow Studs without Inner Ridges

Added Custom Assemblies:

  • 22127 / 22127.dat  Electric Control+ Hub
  • 22169 / 22169.dat  Electric Control+ L Motor
  • 22172 / 22172.dat  Electric Control+ XL Motor
  • 54675 / 54675.dat  Electric Spike Prime Large Motor

md5sum: 72f94b467013612cc0d2644e4065ef17

Share this post


Link to post
Share on other sites

Update 2020-09-07

Rematched:

  • 2654 / 2654a.dat  Dish  2 x  2 with Rim

Importable:

  • 2654.dat / 2654  ~Moved to 2654a

New Custom Parts:

  • 6594 / 6594.dat  Tyre 28/ 38 x 28 VR
  • 22253 / 22253.dat  Wheel 25 x 28 VR with 35mm Diameter Rear Rim and Complete Cross Axle Hole
  • 30116 / 30116.dat  Panel 14 x 14 x  2.667 Quarter Saucer Top
  • 30119 / 30119.dat  Wing  8 x  4 -  2 x  3.333 Down
  • 32057 / 32057.dat  Wheel Rim 14 x 60 with 3 Spokes and 3 Pegholes
  • 32076 / 32076.dat  Tyre 14/ 21 x 57
  • 32077 / 32077.dat  Wheel Rim 28 x 60 with 3 Spokes and 3 Pegholes
  • 32078 / 32078.dat  Tyre 28/ 21 x 57
  • 32180 / 32180.dat  Tyre 30/ 42 x 28 R Balloon
  • 32195 / 32195b.dat Technic Suspension Arm  2 x  6.5 Type 3
  • 32196 / 32196.dat  Tyre 32/ 33 x 61 Racing Wet
  • 32197 / 32197.dat  Wheel Rim 30 x 61 with 3 Spokes Swirled
  • 37383 / 37383.dat  Wheel Rim 42 x 62 with 10 Spokes and  3 Pins
  • 37452 / 37452.dat  Brick  1 x  2 x  2 with Rounded Slab
  • 42529 / 42529.dat  Technic Sprocket Wheel 56.5
  • 49294 / 49294.dat  Wheel Rim 34 x 56 with  6 Double Spokes and  6 Pegholes
  • 52629 / 52629.dat  Technic Ball 19mm for Ball Castor
  • 56907 / 56907.dat  Tyre 35/ 42 x 56 Racing
  • 65092 / 65092.dat  Tile  1 x  1 x  0.5 Octagonal Facetted

Importable Custom Parts:

  • 32195.dat / 32195  ~Moved to 32195b
  • 32195a.dat / 32195  Technic Suspension Arm  2 x  6.5 Type 2

Corrected Custom part:

  • 2337 / 2337.dat  Windscreen  4 x  4 x  2 Canopy Extender

md5sum: 1a48b57caf6a2ad4bb04fb3c49587e49

Share this post


Link to post
Share on other sites

Update 2020-09-24

Added:

  • 93088 / 93088.dat  Animal Puppy Stranding
  • 98389 / 98389.dat  Animal Hedgehog

Added Custom Parts:

  • 44861 / 44861.dat  Plate  1 x  2 with Single Clip on Top (Thick C-Clip)
  • 46372 / 46372.dat  Technic Gear 28 Tooth Double Bevel
  • 49283 / 49283.dat  Technic Cable Clip
  • 52730 / 52730.dat  Technic Steering Constant Velocity 8mm Joint Female
  • 52731 / 52731.dat  Technic Steering Constant Velocity 8mm Joint Male

Added Custom Assembly:

  • 464900 / 46490c01.dat  Wheel Hub with Planetary Gear Reduction with Dark Bluish Grey Wheel Hub

md5sum: 189742f534fc80283fdf4b06dc7629d6

Share this post


Link to post
Share on other sites

Update 2020-10-10

Added:

  • 18663 / 18663.dat  Minifig Stand Flexible
  • 19734 / 19734.dat  Minifig Torso with Two Studs on Two Opposite Sides and Cube Feet
  • 90388 / 90388.dat  Minifig Hat Sombrero
  • 94717 / 94717.dat  Figure Friends Accessories Bow
  • 94718 / 94718.dat  Figure Friends Accessories Award Ribbon with Number 1
  • 94722 / 94722.dat  Figure Friends Accessories Award Ribbon with Number 2
  • 94725 / 94725.dat  Figure Friends Accessories Bow with Heart

Rematched:

  • 10190 / 10190.dat  Minifig Flipper (Thick)
  • 59275 / 59275.dat  Minifig Flipper (Thin)

Importable:

  • 2599.dat / 59275  Minifig Flipper

md5sum: 2b14afa029fe45cef8dc9418d2f65c3e

 

Share this post


Link to post
Share on other sites

Update 2020-10-20

Added:

  • 23766 / 23766.dat  Minifig, Head Cuboid with Raised Rectangle
  • 94719 / 94719.dat  Figure Friends Accessories Comb, Small with Heart
  • 94720 / 94720.dat  Figure Friends Accessories Brush Oval, Large

Rematched:

  • 3308 / 3308a.dat  Arch  1 x  8 x  2

Importable:

  • 3308.dat / 3308  ~Arch  1 x  8 x  2 (Obsolete)
  • 29161.dat / 10190  =Minifig Flipper Thick
  • 88408.dat / 59275  =Minifig Flipper Thin

Added Custom Assemblies:

  • 2698c01 / 2698c01.dat  Technic Action Figure (Complete)
  • 5292 / 42908.dat  Electric RC Race Buggy Motor (Complete)
  • 6272c01 / 6272.dat  Electric RC Race Buggy Receiver Unit with Auxiliary Output (Complete)
  • 9062 / u9062c01.dat  Motor Pull Back 4 x 9 x 2.333 Type 2 with Black Base
  • 32283c01 / 32283c01.dat  Motor Pull Back  4 x  9 x  2.333 Type 1 with Black Base
  • 37191c01 / 37191c01.dat  Minifig Torso Brick  2 x  3 with Arms

Added Custom Parts:

  • 1023 / u1023a.dat  Sheet Plastic 11 x 27 Trapezoidal
  • 1024 / u1023b.dat  Sheet Plastic 14 x 20 Triangular
  • 1025 / u1023c.dat  Sheet Plastic 11 x 20 Trapezoidal
  • 1026 / u1023d.dat  Sheet Plastic 10 x 17 Trapezoidal
  • 2738 / 2738.dat  Technic Suspension Arm  2 x  6.5 Type 1
  • 2999 / 2999.dat  Technic Large Wheel Hub
  • 30037 / 30037.dat  Wing  9 x 12 -  6 x  2.333 Down
  • 32079 / 32079.dat  Technic Beam  9 Liftarm Offset with Boss
  • 32137 / 32137.dat  Technic Connector Block  3 x  2 x  2
  • 66909 / 66909.dat  Bar  2L with Top Studs

md5sum: 8a8072e8561b79d4ef7fa000aff3597c

Share this post


Link to post
Share on other sites

Update 2020-10-23

Added:

  • 10164 / 10164.dat  Minifig Headdress Beanie with Pom Pom
  • 11437 / 11437.dat  Minifig Helmet Ornament Horn Elaborate
  • 15446 / 15446.dat  Minifig Helmet Visor with Night Vision
  • 29601 / 29601.dat  Minifig Gun with Round Heat Diffusers, Fin and Spherical Emitter
  • 30210 / 30210.dat  Dish  2 x  2 with Angled Bar
  • 47991 / 47991.dat  Panel  5 x 10 x 10 Rocky Skull
  • 60751 / 60751.dat  Minifig Helmet with Cheek Protection and Thin Bands
  • 93106 / 93106.dat  Minifig Metal Detector without Stud on Search Head
  • 94721 / 94721.dat  Figure Friends Accessories Brush Round, Small
  • 94723 / 94723.dat  Figure Friends Accessories Sponge

md5sum: 686a99e8cf1a7784b6d36891e532dd2d

Share this post


Link to post
Share on other sites

Update 2020-10-30

Added:

  • 11250 / 11250.dat  Minifig Tool Gavel
  • 15082 / 15082.dat  Animal Wing Bat with  0.5L Bar
  • 15626 / 15626.dat  Panel  4 x 16 x 10 with Gate
  • 21787 / 21787.dat  Minifig Hair Short Quiff
  • 24054 / 24054.dat  Door  1 x  4 x  7.667 with Curved Top
  • 27149 / 27149.dat  Minifig Hat Cylinder Tapered with Hatband
  • 29633 / 29633.dat  Minifig Hair Bob Cut Parted in Middle
  • 29636 / 29636.dat  Minifig Whisk
  • 59232 / 59232.dat  Minifig Flail
  • 93091 / 93091.dat  Figure Friends Handbag with Zipper
  • 94724 / 94724.dat  Figure Friends Accessories Spray Bottle with Heart

Rematched:

  • 23306 / 577c.dat  Minifig Lightsaber Hilt without Bottom Ring
  • 32531 / 32531b.dat  Technic Brick  4 x  6 with Open Center  2 x  4 with Round Underside Studs
  • 32532 / 32532b.dat  Technic Brick  6 x  8 with Open Center  4 x  6 with Round Underside Studs

Importable:

  • 577a.dat / 23306  ~Minifig Lightsaber Hilt without Bottom Ring (Obsolete)
  • 15556.dat / 23306  ~Minifig Lightsaber Hilt without Bottom Ring (Obsolete)
  • 15556a.dat / 23306  =Minifig Lightsaber Hilt without Bottom Ring
  • 32531.dat / 32531  ~Moved to 32531a
  • 32531a.dat / 32531  Technic Brick  4 x  6 with Open Center  2 x  4 with Cross Underside Studs
  • 32532.dat / 32532  ~Moved to 32532a
  • 32532a.dat / 32532  Technic Brick  6 x  8 with Open Center  4 x  6 with Cross Underside Studs

md5sum: e35bb62f0bef2f623e357cd19a94bb38

Share this post


Link to post
Share on other sites

Hi,

It seems part 24299 and 24307 don't export at all from LDD. Is this a problem with my setup ?

I opened Ldraw.xml and found these parts but there are not foundable in LDD.

Share this post


Link to post
Share on other sites

Hi,

It’s not clear to me: You’re first talking about exporting from LDD, so the parts have to be in LDD.  Then you’re saying they aren’t in LDD.

If you can’t find them in LDD with the other wings, then check in Help | About that you have LDD 4.3.11 with a brick version 2670.  If you’ve brick version 777, then you’ve installed 4.3.12.  See one of the numerous posts about this crap (like this last one).

 

Share this post


Link to post
Share on other sites

Hi,

Ok i had installed 4.3.12 version instead of 4.3.11, it's ok now.

i have download your last ldraw.xml file, but i can't find those in LDD in wing parts

Thank your for your help.

Share this post


Link to post
Share on other sites

You need to be in LDD Extended mode (menu View | New themes | Extended).  You can go back and forth between the modes, though, even when LDD was still updated, the last parts updates were only available in Extended, so “normal” mode has been pretty useless for some time now.  LDD saves the last mode used in the LXF, so it starts in the “right” mode when you open a file.  The big difference is in how colours/painting work.

 

Share this post


Link to post
Share on other sites

Update 2020-11-20

Added:

  • 11216 / 11216.dat  Bar Grill 13 X 17 with Studs and Tips
  • 15362 / 15362.dat  Claw  6.4L with Axle
  • 24636 / 24636.dat  Minifig Headdress with Widow's Peak and Two Large Curved Segmented Horns
  • 27934 / 27934.dat  Plate  1 x  2 with Extrusion with Hexagonal Decorations
  • 28946 / 28946.dat  Minifig Head Powerpuff Girls Blossom with Orange Hair and Red Bowtie
  • 28948 / 28948.dat  Minifig Head Powerpuff Girls Bubbles with Yellow Hair
  • 28949 / 28949.dat  Minifig Head Powerpuff Girls Buttercup with Black Hair
  • 43889 / 43889.dat  Animal Tail Joint with Short Pin Connector
  • 89519 / 89519.dat  Bar Grill  9 X 13 with Studs and Tips

Rematched:

  • 30191 / 30191.dat  Bar Flexible H-shaped with Holders

Importable:

  • 30191-f1.dat / 30191  Bar Flexible H-shaped with Holders
  • 89513.dat / 89519  Door  1 x  8 x 12 Castle Gate Portcullis

Added Custom Parts:

  • 2712 / 2712.dat  Technic Rotor  3 Blade
  • 2719 / 2719.dat  Technic Plate  1 x 10 with Holes
  • 2737 / 2737.dat  Technic Steering Arm Tall
  • 2792 / 2792.dat  Technic Steering Top
  • 2900 / 2900.dat  Technic Flex-System Pin Hole Connector
  • 2901 / 2901.dat  Technic Flex-System Ball Connector
  • 2908 / 2908.dat  Technic Helicopter Rotor Holder
  • 2989 / 2989.dat  Technic Brick  1 x  4 with Holes and Bumper Holder
  • 2991 / 2991.dat  Technic Brick  1 x  2 Double Angled with Bumper Holder
  • 2997 / 2997.dat  Tyre 34/ 38 x 56 ZR
  • 2998 / 2998.dat  Wheel Rim 32 x 56 with Peghole and 6 Spokes with Pegholes
  • 3651 / 3651.dat  Technic Connector (Pin/Bush) with 2 Studs
  • 4261 / 4261.dat  Technic Steering Arm
  • 4262 / 4262.dat  Technic Plate  1 x  6 with Holes
  • 4273 / 4273b.dat  Technic Connector Toggle Joint Toothed
  • 4442 / 4442.dat  Technic Plate  1 x  8 with Holes
  • 4504 / 4504.dat  Hinge Plate  1 x  6 with 2 and 3 Fingers On Ends
  • 4727 / 4727.dat  Plant Flower  2 x  2 Leaves
  • 4745 / 4745.dat  Propellor  2 Blade  5.5 Diameter
  • 65401 / 6540b.dat  Technic Steering Arm Large with Peghole
  • 65402 / 6540a.dat  Technic Steering Arm Large with Axlehole
  • 6543 / 6543.dat  Technic Plate  4 x  6 with 4 Position Gear Shift Gate
  • 6549 / 6549.dat  Technic 4 Speed Shift Lever
  • 28125 / 28125.dat  Minifig Headdress Bald Head High
  • 65509 / 65509.dat  Plate  2 x  4 with Groove with  2 Studs
  • 426502 / 6577.dat  Technic Bush  1/2 Type 2

Added Custom Assemblies:

  • 6282 / 6282c01.dat  Electric RC Race Buggy Steering Unit (Complete)  (exports with duplicated axle and level, doesn’t import)
  • 6642 / 6642.dat  Technic Flex-System Pin Connector Double Closed  (doesn’t import, exports with one misplaced lid)
  • 6643 / 6643.dat  Technic Flex-System Pin Connector Single Closed
  • 6644 / 6644.dat  Technic Flex-System Ball Connector Closed
  • 9244 / 3712c01.dat  Technic Universal Joint (Complete Assembly Shortcut)
  • 32181c01 / 76320-f1.dat  Technic Shock Absorber 10L Damped (Extended)
  • 41894c01 / 41894c01.dat  Technic Steering Arm With 2 Ball Joints (Complete)

Importable as Custom Parts:

  • 4265b.dat / 426502  ~Moved to 6577
  • 4273.dat / 4273  ~Moved to 4273b
  • 4273a.dat / 4273  Technic Connector Toggle Joint Toothed With No Slots

md5sum: e18435d056431a28cf7e297d72408d32

Share this post


Link to post
Share on other sites

Update 2020-12-23

Added:

  • 11305 / 11305.dat  Technic Rotor  1 Blade 14L with Axle
  • 12895 / 12895.dat  Minifig Captains Hat with Black Visor and Narrow Golden Braid
  • 25279 / 25279.dat  Animal Horse Friends Barding
  • 98135 / 98135.dat  Technic Rotor  1 Blade 16L with Axle

Added Assembly:

  • 10679 / 10679.dat  Minifig Hips and Legs with Robotic Leg Right

Added as Custom Part but was in LDD before 4.3.10:

  • 23065 / 22119.dat  Ball 52mm Diameter

Added Custom Parts:

  • 2302 / 2302.dat  Duplo Brick  2 x  3 with Curved Top
  • 4587 / 4587.dat  Animal Horse Hitching with Hinge
  • 20193 / 20193.dat  Sheet Plastic  3.6 x  6.6 Rectangular with Mirror Glass Pattern
  • 24108 / 24108.dat  Minifig Sword with Hexagonal Decorations
  • 32627 / 32627.dat  Plate Round  4 x  4 with Groove with Two Open Centre Studs
  • 35039 / 35039.dat  Animal Spider Biomechanical Legs and Head
  • 35473 / 35473.dat  Plant Flower  4 x  4 with  4 Rounded Petals
  • 35565 / 35565.dat  Panel  2 x  6 x  6  with Pointed Arch Opening and Rounded Sides
  • 35578 / 35578.dat  Tyre 14/ 70 x 17
  • 38317 / 38317.dat  Cone  4 x  2 x  3 Half
  • 39613 / 39613.dat  Plate  3 x  3 Heart Shape
  • 40066 / 40066.dat  Door  1 x  6 x  7 with Arch and Rounded Pillars
  • 43979 / 43979.dat  Wing 12 x 12 x  1.333 with  8 x  4 Recessed Centre
  • 46342 / 46342.dat  Plate  6 x  6 Heart Shape
  • 60373 / 60373.dat  Cylinder Quarter  3 x  3 x  5 with 2 Half-Arches at 90 Degrees
  • 65421 / 65421.dat  Technic Concrete Mixer Half Shell
  • 65422 / 65422.dat  Technic Rotor Blade 19L with Beam  3L
  • 67141 / 67141.dat  Technic Panel 15 x  2 x  5  Mudguard Arched with Rounded Top
  • 67142 / 67142.dat  Technic Panel  5 x 13 Curved 50 Tapered Left
  • 68196 / 68196.dat  Technic Panel  5 x 13 Curved #51 Tapered Right
  • 71708 / 71708.dat  Technic Beam  2 x  3 Liftarm Bent 90 Quarter Ellipse
  • 73831 / 73831.dat  Plate  2 x  3 with  1 x  1 Cutout
  • 92198 / 92198.dat  Figure Friends Head without Pattern
  • 92240 / 92240.dat  Figure Friends Male Head without Pattern
  • 107400 / t1074.dat  | Big Ben Bricks Train Wheel Medium Blind Driver 24.0 mm
  • 107500 / t1075.dat  | Big Ben Bricks Train Wheel Blind Driver 30.4 mm

Added Custom Assemblies:

  • 16530 / 16529p01c01.dat  Figure Friends Hips and Legs Mermaid Tail with Light Lime Tip Pattern
  • 38551 / u9210p01c01.dat  Figure Friends Torso Boy
  • 92241 / 92241p01c01.dat  Figure Friends Torso Girl
  • 92242 / 92242p01c01.dat  Figure Friends Torso Man

md5sum: b3bf90da145b21a8fe888a130505a48d

 

Share this post


Link to post
Share on other sites

Update 2021-01-16

Added:

  • 98088 / 98088.dat  Animal Wing Left Pteranodon
  • 98089 / 98089.dat  Animal Wing Right Pteranodon

Corrected:

  • 14226  String Braided 11L with End Studs (Complete)
  • 14224  String Braided 41L with End Studs (Complete)
  • 63140  String Braided 41L with End Studs (Complete)

Those are now flexible as Custom parts and therefore LDD won’t export them anymore… but remember that most flexible parts can be converted by lxf2ldr(.html) :wink:

Added Custom parts:

  • 32166 / 32166.dat  Technic Connector Block  3 x  6 x  1.667 Gearbox
  • 35463 / 35463.dat  Tile  1 x  1 with Curved Triangle
  • 35709 / 35709.dat  Minifig Costume Flowerpot
  • 37493 / 37493.dat  Train Front  6 x 10 x  7
  • 39369 / 39369.dat  Technic Beam 19 x 11 Baseplate
  • 44666 / 44666.dat  Plate 14 x 18 x  1 with Three Pinholes at Centre
  • 49577 / 49577.dat  Plant Seaweed with  4 Studs and  7 Bars
  • 49656 / 49656.dat  Rock  1 x  1 Geode
  • 52494 / 52494.dat  Plate  1 x  1 x  0.667 with Binoculars
  • 65473 / 65473.dat  Brick Round  2 x  2 Curved 135 Degree
  • 65578 / 65578.dat  Plate  1 x  1 Round with Angled Bar
  • 66961 / 66961.dat  Brick  2 x  2 x  0.667 with Handle on  4 Sides and  2 Studs on Top
  • 67095 / 67095.dat  Tile  3 x  3 Round
  • 67139 / 67139.dat  Technic Connector Block  3 x  5 x  1 with Cutout
  • 67440 / 67440.dat  Slope Brick 60  4 x  1 x  3 Inverted
  • 67446 / 67446.dat  Plate 2 x 4 with Side Bricks 1 x 2 x 1.333 with Axle Hole
  • 67811 / 67811.dat  Car Steering Wheel  5 x  5 with Two Spokes and  2 x  2 Stud Centre with Axlehole
  • 68013 / 68013.dat  Cylinder Half  1 x  2 with Cutout
  • 68297 / 68297.dat  Plate  4 x  8 without Corners
  • 68382 / 68382.dat  Plate  1 x  4 with  2 Pins
  • 68495 / 68495.dat  Minifig Cup Stein with Handle
  • 68504 / 68504.dat  Minifig Sundae Glass
  • 68568 / 68568.dat  Plate  3 x  3 with  2 x  2 Corner Round and  2 x  2 with  1 x  1 Corner Round Cutout
  • 68869 / 68869.dat  Tile  4 x  4 x  0.667 with Rounded Corners
  • 69066 / t69066.dat  Container  1 x  3 Crate
  • 69906 / 69906.dat  Bracket  3 x 2 -  2 x  2 Down with Rounded Brace
  • 69909 / 69909.dat  Tyre 28/ 57 x 43 Off Road
  • 69911 / 69911.dat  Technic Panel 13 x  2 x  5 Mudguard Arched with Rounded Top
  • 69963 / 69963.dat  Plate  2 x  4 with Steering Axle Socket
  • 69964 / 69964.dat  Wheel Axle Tilt Steering
  • 71682 / 71682.dat  Technic Panel Curved  3 x  2 x  1
  • 71689 / 71689.dat  Technic Panel 13 x  2 x  5 Mudguard Arched Extension
  • 71709 / 71709.dat  Technic Panel  3 x  7
  • 71710 / 71710.dat  Technic Beam 15 with Alternating Holes
  • 609000 / u609.dat  Brick  1 x  4 x  2 Bellshaped with Headlights

Corrected Custom parts:

  • 36752  Minifig Tool Wand
  • 37695  Plant Stem with  3 Leaves with Bar and Pin Holes
  • 38317  Cone  4 x  2 x  3 Half
  • 41812  Projectile Launcher  4 x  2 x  1 with Bottom Axle
  • 52985  Tyre 27/ 48 x 43
  • 92198  Figure Friends Head without Pattern

Corrected Custom assembly:

  • 279300  PNEUMATIC CYLINDER 2X7

md5sum: e27209a82591db9b5ea02a29bf79865d

Share this post


Link to post
Share on other sites

Update 2021-03-12

Added:

  • 15423 / 15423.dat  Minifig Body Armour Vest
  • 18729 / 18729.dat  Windscreen  6 x 10 x  4 Curved
  • 18926 / 18926.dat  Tipper Bucket 8 x 12 x  4.6667
  • 25111 / 25111.dat  Minifig Sword Dao with Curved Blade and Hilt
  • 30838 / 30838.dat  Wheel Rim  6.4 x 11 with  7 Spokes
  • 93565 / 93565.dat  Minifig Body and Shoulder Armour Smooth
  • 97895 / 97895.dat  Minifig Life Jacket
  • 98150 / 98150.dat  Minifig Head Snake
  • 98386 / 98386.dat  Animal Puppy Walking

Rematched (renamed in LDraw):

  • 9320 / 23807.dat  ~Electric Power Functions 2.0 Socket
  • 23306 / 23306.dat  Minifig Lightsaber Hilt with Steep Sloping Fingers

md5sum: 75125d758db8ef8a3d074291a7cf4abb

Share this post


Link to post
Share on other sites

Update 2021-05-09

Added:

  • 6206 / 6206.dat  Figure Feeding Bottle
  • 10183 / 10183.dat  Minifig Wings Fairy
  • 11055 / 11055.dat  Flag  2 x  2 Square[Thick Clips]
  • 12618 / 12618.dat  Minifig Armour Shoulder Pads with Six Spikes
  • 17979 / 17979.dat  Flag  5 x  6 Hexagonal with Thicker Clips
  • 28424 / 28424.dat  Minifig Police Hat with Hair Pulled Into Bun
  • 47328 / 47328.dat  Technic Bionicle Vahki Lower Leg Section
  • 90109 / 90109.dat  Tipper Bucket 8 x 12 x 4.667
  • 92814 / 92814.dat  Minifig Hat Square Academic Cap with Tassel
  • 93230 / 93230.dat  Minifig Hair Swept Back with Pointed Ears
  • 98067 / 98067.dat  Animal Dinosaur Lower Jaw Raptor
  • 98387 / 98387.dat  Animal Bunny Sitting

Corrected:

  • 24093 / 24093.dat  Minifig Book Cover
  • 32187 / 32187.dat  Technic Transmission Driving Ring Extension
  • 43750 / 43750.dat  Serpent Neck S-Curve with Fixed Pin

Rematched:

  • 2528 / 2528a.dat  Minifig Hat Bicorne
  • 59275 / 59275a.dat  Minifig Flipper Thin

Importable:

  • 2528.dat / 2528  ~Minifig Hat Bicorne (Obsolete)
  • 35378.dat / 87552  =Panel  1 x  2 x  2 Reinforced
  • 42135.dat / 32039  Technic Connector (Axle/Bush) Type 2
  • 42924.dat /  6558  Technic Pin Long with Friction
  • 44676b.dat / 44676  Flag  2 x  2 Trapezoid [Thick Clips]
  • 44874.dat / 87082  Technic Pin Long with Pin Hole Type 2
  • 59275.dat / 59275  ~Minifig Flipper Thin (Obsolete)

Added Custom Parts:

  • 21987 / 21987.dat  Constraction Bar 15L with Axle Bush End
  • 24531 / 2453b.dat  Brick  1 x  1 x  5 with Solid Stud
  • 32172 / 32172.dat  Technic Connector Block  3 x  3 with Ball Socket
  • 35470 / 35470.dat  Plate  3 x  5 Cloud Shape with  3 Studs
  • 35477 / 35477.dat  Brick  1 x  3 x  1.333 with Rounded Ends
  • 37704 / 37704.dat  Sports Ball, Winged, Harry Potter Quidditch Golden Snitch
  • 42205 / 42205.dat  Door  1 x  6 x  6 Frame
  • 42509 / 42509.dat  Glass for Window  1 x  6 x  6
  • 42924 / 42924.dat  Technic Pin Long with Friction Type 2
  • 445671 / 44567a.dat  Hinge Plate  1 x  2 Locking with Groove with Single Finger On Side Vertical
  • 46212 / 46212a.dat  Brick  1 x  2 x  5 with Hollow Studs without Inner Ridges
  • 47326 / 46326.dat  ~Technic Connector  2 x  3 with Ball/Axle Socket with Rubber Insert
  • 50665 / 50665.dat  Minifig Helmet Classic with Thin Chin Guard Unbroken
  • 51377 / 51377.dat  Wheel Rim 14 x 18 with  8 Spokes
  • 53075 / 53075.dat  Animal Dog Dachshund
  • 54661 / 54661.dat  Hinge Brick  1 x  4 Locking Double, Two Finger End with  7 Teeth
  • 55889 / 55889.dat  Wheel 12 x 18 Smooth
  • 61332 / 61332.dat  Technic Pin with Friction Type 2
  • 64454 / 64454.dat  Container Box  3 x  8 x  6.667 - Back
  • 64462 / 64462.dat  Container Box  3 x  8 x  6.667 - Front
  • 65132 / 65132.dat  Hinge Bracket  4 x  5 x  5 Locking with 2 Fingers, Two on Each Side, 3 Teeth and 12 Studs on Back
  • 65140 / 65140.dat  Plate  8 x  8 with Rounded Corners
  • 65304 / 65304.dat  Technic Pin Long with Stop Bush Type 2
  • 65417 / 65417.dat  Boat Hull Floating 36 x  7 x  7 Bottom
  • 65418 / 65418.dat  Boat Hull Floating 36 x  7 x  7 Top
  • 65676 / 65676.dat  Roadsign Clip-on  2.2 x  2.667 Triangular (Thick C-Clip)
  • 65753 / 65753.dat  Minifig Skirt Straight Curved 0.55 Length
  • 66155 / 66155.dat  Wheel Rim 30 x 20 with  3 Dual Angled Spokes and  4L Hub
  • 66252 / 66252.dat  Plate 4 x 4 with Studs on Three Edges and 2 Clips Horizontal (Open C-Clips)
  • 66787 / 66787.dat  Cylinder Warp Pipe  7 x  7 x  3.333
  • 66789 / 66789.dat  Plate  6 x  6 x  0.667 with Rounded Corners with Studs on Edges without 4 Centre Studs
  • 66790 / 66790.dat  Plate  8 x  8 x  0.667 with Rounded Corners with 5 Vacant Stud Areas
  • 66792 / 66792.dat  Plate  4 x  4 x  0.667 with Rounded Corners with Studs on Edges
  • 66855 / 66855.dat  Plate  2 x  2 with Truncated Cube Extension
  • 66857 / 66857.dat  Tile  2 x  4 with Rounded Ends
  • 66858 / 66858.dat  Figure Feet  2 x  2 x  0.667
  • 66859 / 66859.dat  Figure Feet  2 x  3 x  0.667
  • 66956 / 66956.dat  Slope Brick Curved  2 x  2 with Double Cutout
  • 67013 / 67013.dat  Shell  4 x  4 x  1.333 with  2 x  2 Recess
  • 67931 / 67931.dat  Shell  4 x  4 x  1.333 with Spikes with  2 x  2 Recess
  • 68211 / 68211.dat  Bar  1 L with Three Prongs
  • 69729 / 69729.dat  Tile  2 x  6
  • 69900 / 69900.dat  Technic Chain Tread 38 Narrow with Central Divider
  • 69944 / 69944.dat  Minifig Sword Macuahuitl with Eight Blades
  • 69958 / 69958.dat  Plate 16 x 16 x  0.667 with Cutouts and Recessed Studs
  • 70681 / 70681.dat  Slope Brick Curved  1 x  3 with  1 x  2 Inverted Cutout
  • 70695 / 70695.dat  Tyre 26/ 49 x 30 Tractor
  • 71752 / 71752.dat  Brick  2 x  2 x  0.667 Ribbed Horizontally
  • 71771 / 71771.dat  Slope Brick Curved  5 x  8 x  0.667 without Studs
  • 71772 / 71772.dat  Plate  8 x 16 x  0.667 with Cutouts and Recessed Studs
  • 72078 / 72078.dat  Tile  1 x  1 x  0.5 with Raised Diamond Gem
  • 72869 / 72869.dat  Bar Tube with Clip Angled 90 Degrees
  • 73109 / 73109.dat  Technic Brick  1 x  2 with Plate  1 x  2
  • 73230 / 73230.dat  Technic Brick  1 x  1 with Axlehole
  • 73682 / 73682.dat  Brick  3 x  3 with Rounded Inverted Cutout and Rounded Corner
  • 73825 / 73825.dat  Bracket  1 x  1 -  1 x  2 Up
  • 76798 / 76798.dat  Panel  5 x  8 x  3.667 Curved with Two Axleholes
  • 78267 / 78267.dat  Sheet Plastic  5.3 x 20.3 Rectagular with  4 Tabs
  • 983932 / 1010475.dat  Figure Friends Medical Clipboard
  • 983933 / 1010481.dat  Figure Friends Medical Otoscope
  • 983935 / 1010470.dat  Figure Friends Medical Spoon
  • 983936 / 1010462.dat  Figure Friends Medical Feeding Bottle
  • 983937 / 1010471.dat  Figure Friends Medical Ice Pack
  • 983938 / 1010482.dat  Figure Friends Medical Nurse Hat
  • 949001 / u9490c01.dat  Minifig Cape Cloth Tattered and Pixelated (Formed)

Corrected Custom Parts:

  • 39739 / 39739.dat  Tile  1 x  1 Heart Shape
  • 42716 / 42716.dat  Wheel Rim 20 x 30 "Torq Thurst" with  5 Spokes and External Ribs
  • 54661 / 54661.dat  Hinge Brick  1 x  4 Locking Double, Two Finger End with  7 Teeth
  • 500181 / 50018a.dat  Plate  1 x  1 Hexagonal with Studs on Both Sides and 3 Bars at 120 Degrees
  • 500183 / 50018c.dat  Bar with Perpendicular Hollow Stud and Bar

Importable as Custom Part:

  • 46212.dat / 46212  ~Brick  1 x  2 x  5 without Centre Studs (Obsolete)

md5sum: ebf05a258d72a05cb18394db119320c2

Share this post


Link to post
Share on other sites

Update 2021-05-10

Added Custom Parts:

  • 21987 / 21987.dat  Constraction Bar 15L with Axle Bush End
  • 46891 / 46891.dat  Technic Excavator Bucket 19 x 12
  • 65128 / 65128.dat  Container Lid  8 x  8 x  4.667 with Latches
  • 983930 / 1010470.dat  Figure Friends Medical Spoon

md5sum: 35dd924f8f41917eb1cc0787bc401157

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.