Sign in to follow this  
steph77

[PORSCHE] Porsche 919 Hybrid

Recommended Posts

Hi all,

and Particlary Jim... Is it ok to post a WIP topic for this contest or not?

Just to be sure...

Share this post


Link to post
Share on other sites

Actually I am not sure what the rules say. I am definitely okay with it and I encourage EB members to post their WIPs, but I am not sure about the official TLG rules.

I have changed the prefix to [PORSCHE] by the way, also in the contest topic.

Share this post


Link to post
Share on other sites

Okay okay, so I'm not the only one working on that exact model.

Looking forward to see your car Steph !

PS : If WIP topics are allowed, I would create one too.

Share this post


Link to post
Share on other sites

Reading the rules, I don't see any limitations on existing MOCs and/or posting a WIP....so I think it's cool.

Share this post


Link to post
Share on other sites

I just post the question on rebrick comments page to be sure it is allowed or not.

Share this post


Link to post
Share on other sites

I got the official answer from REBRICK:

RebrickAdmin

@SR-77 Yes, that's completely allowed! There's no restriction on sharing your model elsewhere in this contest.

Let's go or a wip topic!

Share this post


Link to post
Share on other sites

Hi eurobrikers,

Here is what i am working on for this contest.

This is a scaled model of the 919 hybrid LMP1 car.

As you can see i worked it at a small scale. About 1/2 of the 42056...

I try to implement great functions in it.

-First is a modular building frame and a bodywork that can easy be removed

-Second a sequential 4 speeds gearbox. I still ask myself for the lever. I have few solutions but i think, on this model and at this scale, that something very simple can be the best solution

-Direction with HOG

-Opening doors

-4WD

-Leveling system for pitstops

-And, if possible du to weight, a reversible KERS system based on a pullback motor.

Some pictures of the curent state of the WIP:

GLSJoI.jpg

36B2aW.jpg

CgHosw.jpg

Fwtod9.jpg

RqyY0X.jpg

1WLItB.jpg

Any comments are welcome!

Share this post


Link to post
Share on other sites

Doesn't the 919 have a turbocharged V4, and not a V8?

m16_0254_fine-56c376e970d7d.jpg

Apart from that though, it's looking good so far!

Edited by Jay Psi

Share this post


Link to post
Share on other sites

Very nice!

i like the idea of the pullback reversible ERS, i had a similar idea on that as well, two simple gearboxes should do the trick (one for reversing direction, one for either linking the motor to the drive axle, or locking it down)

Share this post


Link to post
Share on other sites

Doesn't the 919 have a turbocharged V4, and not a V8?

m16_0254_fine-56c376e970d7d.jpg

Apart from that though, it's looking good so far!

More is less.

Share this post


Link to post
Share on other sites

Mine's about the same scale as yours. :wink: Yours looks very promising with lots of nice details. :thumbup:

Edit: I did not copy your scale, mine was already in this scale. :innocent:

Edited by Offroadcreat1ons

Share this post


Link to post
Share on other sites

I'm planning two entries, and one is going to be this model. I bet nobody's going to have the same features as I'm planning though...

Share this post


Link to post
Share on other sites

Hi eurobrikers,

Here is what i am working on for this contest.

This is a scaled model of the 919 hybrid LMP1 car.

As you can see i worked it at a small scale. About 1/2 of the 42056...

I try to implement great functions in it.

-First is a modular building frame and a bodywork that can easy be removed

-Second a sequential 4 speeds gearbox. I still ask myself for the lever. I have few solutions but i think, on this model and at this scale, that something very simple can be the best solution

-Direction with HOG

-Opening doors

-4WD

-Leveling system for pitstops

-And, if possible du to weight, a reversible KERS system based on a pullback motor.

Some pictures of the curent state of the WIP:

Any comments are welcome!

Love what you are building here.

So much functions in a tiny space.

Even a gearbox, great!

The engine looks nice too, as does the panel placement.

Are you building to scale, or a blueprint, or just on the go?

Share this post


Link to post
Share on other sites

I do not use any blueprint. I Just follow my inspiration on this....

Edited by steph77

Share this post


Link to post
Share on other sites

I'm planning two entries, and one is going to be this model. I bet nobody's going to have the same features as I'm planning though...

Im really looking forward to the results, im not a good MOCer myself, but seeing a bunch of these 919s designed will be awesome!

Share this post


Link to post
Share on other sites

Hi,

Current state of the WIP

i finalised the front end. The whole trunk opensin one piece. Direction and embended steering Wheel are functional

I also take out the 4WD. it generate friction and needed a central differential that took too much place. Actually i got a realistic cockpit with enough space for the pilot

kBekQc.jpg

Still not satisfied on the lateral proportions, still lots off work on that point.

V8 homemade engine as been exchanged by a standard 4 cylinders lego official engine - a think a better choice for a REBRICK contest, and more realistic here

uXr4Ut.jpg

Back view satisfied me at this point. missing the rear end wing

XUxoHv.jpg

View of the opening trunk

Fw8ssb.jpg

Edited by steph77

Share this post


Link to post
Share on other sites

Looking good!

I really need some of those wheels, those are off of 42041 right? I wish lego made mode cars/racecars in this scale

Share this post


Link to post
Share on other sites

Actual WIP progress :

I worked hardly on integrating the KERS system. Sadly, i failed due to weight of the car and due to the fact that when using gears between a pullback motor and final transmission doesn’t work proprely.

So my thought at this point is simply removing this system. I’ll try to work on a centrifugal wheel in place of the pullback. The issue is that technology is from audi and toyota, in real life :(

This said, i finalised the cockpit area with a simple mechanism for opening the doors, i locked the frame in all direction and adjust the direction system. I finaly used a pin joiner for HOG with a different gear setup that keep it very smooth.

I also began the final setup of the gearbox wich will be a sequential 4 speed, as on 42056.

But without any friction and a real high rotation setup (begin with a 24T/8t/20T/diff…)

Pictures of the actual progress (my son build the back area but was too lasy to search proper color element, need to check this point)

View of the cockpit area

x3I62u.jpg

WL9PcP.jpg

3mlX5t.jpg

hJL0YI.jpg

aXmBeJ.jpg

oUSJxs.jpg

Edited by steph77

Share this post


Link to post
Share on other sites

Looking good!

How about placing the pullback KERS on the front wheels? that would return some type of 4WD to the model as well, but reduce the amount of gears between the pullback and the wheels.

Will you be publishing instructions once you finish the build? So far this is looking excellent, and id love to build it myself

Share this post


Link to post
Share on other sites

I will try to implement the pullback KERS on the front wheels. Not sure there will be enough space for it.

I think to realise a ldd file for it, no instructions. I'll published it for free:)

Share this post


Link to post
Share on other sites

Great little car, I can imagine lego producing something very much like this as an official set. Its also nice to see somebody else using the blue 18944 and 24116 panels.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.