Choubs Posted February 12, 2020 Just now, Cody Startale said: Looking good, @Choubs ! I just wanted to know if this would come to any fruition before starting. I will notify you when I am done. No problem, I understand it. Share this post Link to post Share on other sites
Cody Startale Posted February 12, 2020 Hey @Choubs, your decal is finished. I made it more authentic and true to the movie look (this was my reference), I hope you like it and have fun with it! Share this post Link to post Share on other sites
Choubs Posted February 12, 2020 (edited) 3 hours ago, Cody Startale said: Hey @Choubs, your decal is finished. I made it more authentic and true to the movie look (this was my reference), I hope you like it and have fun with it! Thanks a lot ! Which software do you use ? Edited February 12, 2020 by LuxorV Please do not quote images from the same page, and especially the post above yours. Thank you. Share this post Link to post Share on other sites
Cody Startale Posted February 12, 2020 You are welcome. I usually do my vector designs in CorelDRAW. Share this post Link to post Share on other sites
Choubs Posted February 12, 2020 Re @Cody Startale here's a first feedback/test. I need to change the glass by a trans-clear but that's the idea. I've also seen that there are champagne custom glass. Maybe change the head too, but it's hard to find the perfect one ! Plus I have to use a laser printer and not an inkjet. Thanks again! Share this post Link to post Share on other sites
Choubs Posted February 14, 2020 Re @Cody Startale, As promised here is a picture. Thanks again. What do you think about it ? Share this post Link to post Share on other sites
Cody Startale Posted February 17, 2020 I think it looks great, @Choubs! I wasn't sure if the design would not be too detailed / small for a minifig print size, but your printer seems to be of good quality because it turned out very well! Good job and thanks for sharing! Share this post Link to post Share on other sites
Mattyj82 Posted February 23, 2020 (edited) On 2/12/2020 at 2:33 PM, Cody Startale said: Hello Choubs! I would be willing to provide the decal for you, but do you have experience in decal usage? Have you worked with / applied them before? I am just asking because with newcomers, one's gotta be a little bit cautious: a lot of people only register to request a decal, and when they get their wish fulfilled, you never hear or see from them again. I have created quite a number of decals for people, and not once have I seen someone put them to use and maybe photograph the result, so that's a bit discouraging tbh. I’m one of those people. You made me Bob The Goon. I will be making the fig soon. I have half a sheet ready to print. Looking for a few more to fill it up before I print it. Hello Iv got a few requests if anyone is interested? all dc hero's Star Spangled Kid Brainwave Jr Captain Nazi superboy prime Cluemaster mister terrific (Sloane version) ravager (Grant Wilson) Robin earth 2 batman version per degatron Dwafstar northwind Silver Scarb Fury hawkwoman hawkman thank you in advance Edited February 23, 2020 by Mattyj82 Share this post Link to post Share on other sites
TheRedBarron Posted March 15, 2020 Has anyone made a decal for the Arkham Knight's torso? Also are these any cammo leg decals that I may edit Share this post Link to post Share on other sites
eycopink0710 Posted March 22, 2020 Hi, Can anyone make the prototype batman suit? Google has a few, but havent seen one that has designs for both front and back. Share this post Link to post Share on other sites
Shovelknightfan Posted April 2, 2020 (edited) Can someone make the torso, face and legs for wally west flash (Rebirth)? Edited April 2, 2020 by Shovelknightfan Share this post Link to post Share on other sites
MatthewRC Posted June 2, 2020 (edited) I would like to request revised Ed, Edd n Eddy decals because I would like to use them for a LEGO Ideas project. I promise to credit anyone who creates them in my product idea’s description. Original thread: https://www.eurobricks.com/forum/index.php?/forums/topic/33407-ed-edd-n-eddy-decals/ Edited June 2, 2020 by MatthewRC Share this post Link to post Share on other sites
Tobias_Jay Posted June 6, 2020 (edited) On 6/2/2020 at 9:29 PM, MatthewRC said: I would like to request revised Ed, Edd n Eddy decals because I would like to use them for a LEGO Ideas project. I promise to credit anyone who creates them in my product idea’s description. Original thread: https://www.eurobricks.com/forum/index.php?/forums/topic/33407-ed-edd-n-eddy-decals/ Hi, i’m happy to give these a crack. I’m on a bit of a decal designing blitz, so I might have them done by the end of the weekend. Was it just those torsos you wanted? Edited June 6, 2020 by Tobias_Jay Share this post Link to post Share on other sites
MatthewRC Posted June 6, 2020 32 minutes ago, Tobias_Jay said: Hi, i’m happy to give these a crack. I’m on a bit of a decal designing blitz, so I might have them done by the end of the weekend. Was it just those torsos you wanted? Actually, I just wanted the Eds and the six Cul-De-Sac kids. The Kanker Sisters have to be excluded because LEGO Ideas views the word “Kanker” as European profanity. Trust me, that’s a fact! Share this post Link to post Share on other sites
MatthewRC Posted June 13, 2020 I don’t mean to double-post, but I’d personally like to see minifigure decals for characters from the Ben 10 franchise. I’m planning to make a Ben 10: Legacy diorama for LEGO Ideas. Here’s what I want so far. Original 2005 TV Series Ben Tennyson (10 years old) Gwen Tennyson (10 years old) Grandpa Max Tennyson Heatblast Ben 10: Alien Force Ben Tennyson (15 years old) Gwen Tennyson (15 years old) Kevin E. Levin (16 years old) Ben 10: Ultimate Alien Ben Tennyson’s Knight Armor from “The Ultimate Enemy, Part 2” Ben 10: Omniverse Ben Tennyson Rook Blonko I’ll update this post when I come up with more characters. Share this post Link to post Share on other sites
Slinky44 Posted July 17, 2020 Hey all I was just wondering if someone would potentially be able to make a full body phase 2 clone decal as I have been decalling clones for a while and it's a big hobby of mine I hope it's not to much to ask for but thank you all! Share this post Link to post Share on other sites
NewtonHorse Posted July 30, 2020 Hello! I am starting work on a LEGO Ideas set based on the Oculus Rift VR game "Lone Echo", and I would like to request a full set of decals (Face, Chest Front + Back, Arms, Legs) that I can use with Bricklink Studio's Part Designer for the Echo-1 Android, "Jack". Here is a full body official render: https://www.artstation.com/artwork/XWxLY Here is some concept art that shows a better view of his back: https://www.tobiaskwan.com/loneecho/sfm99bga8k9aa07jhzna7lia0hnjdq The concept art isn't 100% accurate to the in-game model, so please use the official render as a reference where possible. Ideally, I would be using a space helmet piece on his head and some backpack pieces for the EVA thruster. (Yellow backback in the concept art) Full credit would be given to the artist(s) on anything I post that uses the decals. Thanks in advance :) Share this post Link to post Share on other sites
TheRedBarron Posted August 6, 2020 has anyone done a mr.gold face? All i've been able to find is the torso. If not I'd like to request a mr.gold face Share this post Link to post Share on other sites
Greg the Gungan Posted September 2, 2020 hey ı want to request a decal of stalin if you can both torso and face if you can Share this post Link to post Share on other sites
valon Posted January 7 i was wondering if anybody could make a decal for a red and gold kingdom lion knight Share this post Link to post Share on other sites
RavioliRavioli Posted February 3 Head Modified Spongebob Template? Share this post Link to post Share on other sites
Spanglish13 Posted February 12 Hey yall i hope this is the right place to ask this but i am looking for a decal for the Mimban stormtroopers and mudtroopers from the Solo Movie. Ive scoured the indexes and the star wars topics for a few days now and havn't found anything. If its already available somewhere and someone could send me a link or if someone would be kind enough to try and design either one that would be awesome! Share this post Link to post Share on other sites
CreeperBrix Posted Sunday at 10:27 PM I'm making a Lego Ideas project based on Undertale and I'd like to request these decals (Sadly, I'm not very good with digital art) A Minifigure head with Sans' face A torso with Sans' hoodie (double-sided, leave out the hood on the back) Medium legs with Sans' shorts and slippers (front, sides and back) (White stripe on either side of shorts) Picture of Sans: That's it for now, thanks in advance! Share this post Link to post Share on other sites