Philo Posted January 20, 2020 On 1/19/2020 at 12:07 AM, imurvai said: - Minor fixes Did you make something to improve the lag with some devices? Anyway, 2.6 works perfectly now on my G5+!!! Tested on Batmobile/PoweredUp and 42099 / Control+ Quote Happy playing! For sure Share this post Link to post Share on other sites
msk6003 Posted January 20, 2020 Is this support spike prime and wedo 2.0 hub? Share this post Link to post Share on other sites
imurvai Posted January 20, 2020 6 hours ago, Philo said: Did you make something to improve the lag with some devices? Anyway, 2.6 works perfectly now on my G5+!!! Tested on Batmobile/PoweredUp and 42099 / Control+ Actually I did some changes relating to the scheduling, so it's great it fixed you lag issues. 1 minute ago, msk6003 said: Is this support spike prime and wedo 2.0 hub? No, at least yet. Once I have one I'll add support for them. Share this post Link to post Share on other sites
Philo Posted January 20, 2020 50 minutes ago, imurvai said: Actually I did some changes relating to the scheduling, so it's great it fixed you lag issues. Unfortunately this victory was short lived :( I tried again with Batmobile, and the huge lags are back. Kind of strange, since this morning I was able to connect several times flawlessly, including with 42099. I tried to unpair the controller, reboot my phone and make the same sequence of actions I did this morning (pair the controller, lauch BC2, connect to Batmobile) but to no avail. Share this post Link to post Share on other sites
kbalage Posted January 21, 2020 @Philo did you try to reset the hub? Theoretically it only resets the saved connections but I had a similar lag once previously and doing the reset on the hub somehow solved it. Share this post Link to post Share on other sites
Philo Posted January 21, 2020 7 hours ago, kbalage said: reset What do you mean with reset, just remove batteries or something more radical? Share this post Link to post Share on other sites
kbalage Posted January 21, 2020 Just now, Philo said: What do you mean with reset, just remove batteries or something more radical? :) less radical, the 7+ second long press until it flashes purple. Share this post Link to post Share on other sites
Philo Posted January 21, 2020 1 hour ago, kbalage said: :) less radical, the 7+ second long press until it flashes purple. Mmmhhh... can't get that. If I push the green button for a long time the Pup hub just shuts down. No purple light. Share this post Link to post Share on other sites
Jetro Posted January 21, 2020 @Philo do it with the hub off ;) Share this post Link to post Share on other sites
Philo Posted January 21, 2020 Stupid me - thanks @Jetro. But that doesn't solve the problem, still experience variable lags (from 0 to 5 seconds or so!!!). I was so happy when it worked. What did changed to make it work? What whanged back to break it again??? Share this post Link to post Share on other sites
Gimmick Posted January 21, 2020 1 hour ago, Philo said: Stupid me - thanks @Jetro. But that doesn't solve the problem, still experience variable lags (from 0 to 5 seconds or so!!!). I was so happy when it worked. What did changed to make it work? What whanged back to break it again??? Just to clarify: Does this delay happen between controller and phone, even inside the app if no hub is paired, only with a paired hub and only at the hub and not in the app and not with Control+? Share this post Link to post Share on other sites
Philo Posted January 22, 2020 (edited) Indeed, to make it clear: No lag with BC2 in device test mode, sliders respond immediately. No lag with BC2 in controller test mode Control+, PoweredUp and ControlZ apps work perfectly. BC2 with the same controller and hubs work fine on my Asus tablet. Edited January 22, 2020 by Philo Share this post Link to post Share on other sites
imurvai Posted January 22, 2020 On certain Android phones BC2 produces lags in play mode. The simptoms are the same as @Philo is experiencing, device tester and the controller testers are working OK, but there are lags, stuck motors during playing. Unfortunately on my Android devices this issue doesn't appear so it's quite hard to debug/fix it. I'm in contact with users experiencing the issue and I'm trying to fix it. Sorry for the inconvenience... Share this post Link to post Share on other sites
Philo Posted January 22, 2020 1 hour ago, imurvai said: I'm in contact with users experiencing the issue and I'm trying to fix it. Sorry for the inconvenience... Tell me if I can be of any help! Share this post Link to post Share on other sites
Eiffeltom Posted January 25, 2020 Hello. Please, do I do something wrong? I have new Buwizz 2. When creating/modifying a profile I cannot invert a motor direction, resp. I can switch it in settings but it is not saved. When I just exit the settings and open it again it is not inverted. Motor direction is still the same, not inverted. How should I invert the direction so that it remains? Share this post Link to post Share on other sites
iuliand Posted January 25, 2020 3 hours ago, Eiffeltom said: Hello. Please, do I do something wrong? I have new Buwizz 2. When creating/modifying a profile I cannot invert a motor direction, resp. I can switch it in settings but it is not saved. When I just exit the settings and open it again it is not inverted. Motor direction is still the same, not inverted. How should I invert the direction so that it remains? Are you sure you are exiting using the checkmark in the top right corner? Share this post Link to post Share on other sites
Eiffeltom Posted January 26, 2020 (edited) 21 hours ago, iuliand said: Are you sure you are exiting using the checkmark in the top right corner? Uups. I knew I did something wrong. Stupid thing. Uuaaaaa. Now it works fine. Thanks. Edited January 26, 2020 by Eiffeltom Share this post Link to post Share on other sites
iuliand Posted January 26, 2020 Does BrickController 2 app supports Sbrick Plus? Share this post Link to post Share on other sites
Gimmick Posted January 27, 2020 6 hours ago, iuliand said: Does BrickController 2 app supports Sbrick Plus? https://github.com/imurvai/brickcontroller2 Yes, it does. Share this post Link to post Share on other sites
IvanK Posted January 29, 2020 (edited) Hello! I also have lags with control + and gamepad. There are no problems with buwizz. I am using Xiaomi Redmi note 4x. But OnePlus 6 works fine with all devices Edited January 30, 2020 by IvanK Share this post Link to post Share on other sites
Lok24 Posted February 6, 2020 (edited) Hi, I did not find the requirements for the app. As far as i know BLE came with Android 4.3. But whats required for Brick Controller 2 ? Edited February 6, 2020 by Lok24 Share this post Link to post Share on other sites
Jetro Posted February 6, 2020 8 hours ago, Lok24 said: Hi, I did not find the requirements for the app. As far as i know BLE came with Android 4.3. But whats required for Brick Controller 2 ? BLE became standard with Bluetooth 4.1, but some bluetooth 4.0 devices also have BLE Share this post Link to post Share on other sites
Clone303 Posted February 7, 2020 awesome app but could you not add so the app itself had controller in it? i would really like that for hard to control anything wtih normal controls wtihout wireless controller and yea i know normal point is use one for app but a in app controller would be nice and sorry if im english is bad or sound bad Share this post Link to post Share on other sites
Lok24 Posted February 7, 2020 16 hours ago, Jetro said: BLE became standard with Bluetooth 4.1, but some bluetooth 4.0 devices also have BLE Yes but my question is concerning the Android Version required for brick Controller 2 Share this post Link to post Share on other sites
Gimmick Posted February 7, 2020 3 hours ago, Lok24 said: Yes but my question is concerning the Android Version required for brick Controller 2 https://github.com/imurvai/brickcontroller2 4.3 Share this post Link to post Share on other sites