LegoPercyJ

Lego Licensed Parts available from Bricks & Pieces

Recommended Posts

14 minutes ago, toydad2 said:

what are the round chicken tiles from? I dont think Chinese new year sets

Yeah they are from the Chinese New Year set 80101

Share this post


Link to post
Share on other sites

I'm pretty new to this thread, so I apologize if this has been discussed at length before. If anyone is familiar with the lists at http://bnp.jonaskramm.com/ (warning, this goes to a Google Drive folder with a few spreadsheets) how comprehensive is it? I am thinking about putting together an order of some interestd B&P parts, but searching through the service is exhausting.

As a second question, I did some comparison shopping between Bricklink and B&P pricing for the same parts. I was looking at a lot of minifigure parts, which were usually more expensive at B&P than at Bricklink, but some were excellent deals, especially because you can get free shipping through Lego S@H. My question is how do you do you comparison shopping for prices?

 

Thanks in advance!

Share this post


Link to post
Share on other sites
1 hour ago, linnormlord said:

I'm pretty new to this thread, so I apologize if this has been discussed at length before. If anyone is familiar with the lists at http://bnp.jonaskramm.com/ (warning, this goes to a Google Drive folder with a few spreadsheets) how comprehensive is it? I am thinking about putting together an order of some interestd B&P parts, but searching through the service is exhausting.

As a second question, I did some comparison shopping between Bricklink and B&P pricing for the same parts. I was looking at a lot of minifigure parts, which were usually more expensive at B&P than at Bricklink, but some were excellent deals, especially because you can get free shipping through Lego S@H. My question is how do you do you comparison shopping for prices?

 

Thanks in advance!

It is not comprehensive at all. That is why it is called "Highlights". It is a tiny fraction of the parts available through B+P. It is also likely to be out of date, as although things tend to get added in batches, things disappear from stock daily.

To compare stock, you have to do it part by part. Once you know that most torsos cost roughly the same amount at B+P, you can make approximations but need to be aware of dual molded arms or specialised hands and so on that will change the basic price. For non-minifigure parts, it is much harder to compare. You either get a feel for prices across parts you are interested in, or take ages doing the comparisons.

 

Share this post


Link to post
Share on other sites
1 hour ago, MAB said:

It is not comprehensive at all. That is why it is called "Highlights". It is a tiny fraction of the parts available through B+P. It is also likely to be out of date, as although things tend to get added in batches, things disappear from stock daily.

To compare stock, you have to do it part by part. Once you know that most torsos cost roughly the same amount at B+P, you can make approximations but need to be aware of dual molded arms or specialised hands and so on that will change the basic price. For non-minifigure parts, it is much harder to compare. You either get a feel for prices across parts you are interested in, or take ages doing the comparisons.

 

Thank you for the reply. I should clarify when I said "comprehensive" I meant "in covering interesting to this thread pieces" and of course not all pieces.

Share this post


Link to post
Share on other sites
14 minutes ago, linnormlord said:

Thank you for the reply. I should clarify when I said "comprehensive" I meant "in covering interesting to this thread pieces" and of course not all pieces.

Even then, not really, as people are interested in quite different things being available. Plus many of the interesting parts are not strictly licensed but the more general thread on B+P died while this one thrived so this has been the goto thread for all parts not just licensed. It would be good if he / users can keep it up to date with new parts added though, as that is what is really needed. Trawling through all the old parts is one of the most annoying things about buying at bricks and pieces. Knowing what had been added would be really beneficial.

Share this post


Link to post
Share on other sites

I called B&P and they said no one is going to get their orders unless Megbricks takes a few days off of placing orders. They said they can't even see the emergency exit door because its blocked by Megbricks' pending shipments. Three of their forklifts broke down from hauling Megbricks' orders. At this point they're considering changing the name to MegBricks and Pieces.

Give 'em a break! :tongue:

Share this post


Link to post
Share on other sites
5 hours ago, linnormlord said:

I'm pretty new to this thread, so I apologize if this has been discussed at length before. If anyone is familiar with the lists at http://bnp.jonaskramm.com/ (warning, this goes to a Google Drive folder with a few spreadsheets) how comprehensive is it? I am thinking about putting together an order of some interestd B&P parts, but searching through the service is exhausting.

As a second question, I did some comparison shopping between Bricklink and B&P pricing for the same parts. I was looking at a lot of minifigure parts, which were usually more expensive at B&P than at Bricklink, but some were excellent deals, especially because you can get free shipping through Lego S@H. My question is how do you do you comparison shopping for prices?

 

Thanks in advance!

What I do is have my bricks loading into a Bricklink wishlist.  Then I note the prices on B&P and put that in as my "Max Price" on Bricklink.  That way, I can do a quick check and see just how available a part is above or below the B&P price point to decide which marketplace I'm buying at.

Share this post


Link to post
Share on other sites
2 hours ago, koalayummies said:

I called B&P and they said no one is going to get their orders unless Megbricks takes a few days off of placing orders. They said they can't even see the emergency exit door because its blocked by Megbricks' pending shipments. Three of their forklifts broke down from hauling Megbricks' orders. At this point they're considering changing the name to MegBricks and Pieces.

Give 'em a break! :tongue:

Lol

Share this post


Link to post
Share on other sites
4 hours ago, koalayummies said:

I called B&P and they said no one is going to get their orders unless Megbricks takes a few days off of placing orders. They said they can't even see the emergency exit door because its blocked by Megbricks' pending shipments. Three of their forklifts broke down from hauling Megbricks' orders. At this point they're considering changing the name to MegBricks and Pieces.

Give 'em a break! :tongue:

Hahaha hahahahaha neverrrr gooingggg to stoooooooppp...:)

Share this post


Link to post
Share on other sites

Fail!!! Hahaha all of the round food tiles from 80101 are available again so I placed another order;) I have no idea what I will do with those :)

Share this post


Link to post
Share on other sites
19 hours ago, linnormlord said:

If anyone is familiar with the lists at http://bnp.jonaskramm.com/ (warning, this goes to a Google Drive folder with a few spreadsheets) how comprehensive is it? I am thinking about putting together an order of some interestd B&P parts, but searching through the service is exhausting.

It only includes parts from the current season. I made a list that covers parts available from 2017, 2018 and 2019, but note that it excludes interesting parts that I already purchased: https://puu.sh/CCfRF/e6bc3397bd.pdf

 

15 hours ago, koalayummies said:

I called B&P and they said no one is going to get their orders unless Megbricks takes a few days off of placing orders. They said they can't even see the emergency exit door because its blocked by Megbricks' pending shipments. Three of their forklifts broke down from hauling Megbricks' orders. At this point they're considering changing the name to MegBricks and Pieces.

Give 'em a break! :tongue:

This is priceless! :roflmao::thumbup:

 

 

Edited by Exetrius

Share this post


Link to post
Share on other sites

Omg. Almost 6am here couldn’t sleep anymore... went on megbricks and pieces;) and.... a lot of torsos and printed parts from the flint stones available!!!

 

Édit: and some printed parts from the mustang so I had to put another order in!;)

Edited by Megbricks
More pieces available

Share this post


Link to post
Share on other sites
17 hours ago, koalayummies said:

I called B&P and they said no one is going to get their orders unless Megbricks takes a few days off of placing orders. They said they can't even see the emergency exit door because its blocked by Megbricks' pending shipments. Three of their forklifts broke down from hauling Megbricks' orders. At this point they're considering changing the name to MegBricks and Pieces.

Give 'em a break! :tongue:

Still laughing ?

With my new flintstone orders (probably made of rock) they will break more forklifts;)

Share this post


Link to post
Share on other sites

FWIW it has just appeared (6258831) 6258831but not in stock :(

Quite some of the 10265 set are available, though. Nearly all of the printed parts as well as

62539356250349

 

Edited by anothergol

Share this post


Link to post
Share on other sites
1 hour ago, anothergol said:

FWIW it has just appeared (6258831) 6258831but not in stock :(

 

Yeah I checked for you this morning:(

Share this post


Link to post
Share on other sites

Thanks Megabricks for the heads up.  Just places my order for the flintstones tiger printed tiles.  I'm surprised all the heads are available but missing some hair pieces lol

Share this post


Link to post
Share on other sites
17 minutes ago, Pchan1983 said:

Thanks Megabricks for the heads up.  Just places my order for the flintstones tiger printed tiles.  I'm surprised all the heads are available but missing some hair pieces lol

Were the heads available?  I checked an hour ago, and just now, and didn't see the heads.  They're showing out of stock.

Share this post


Link to post
Share on other sites
3 hours ago, Pchan1983 said:

Thanks Megabricks for the heads up.  Just places my order for the flintstones tiger printed tiles.  I'm surprised all the heads are available but missing some hair pieces lol

Yeah that’s weird...although I am surprised to have so many available printed pieces. 

3 hours ago, Alpinemaps said:

Were the heads available?  I checked an hour ago, and just now, and didn't see the heads.  They're showing out of stock.

They never were when I checked:/

Share this post


Link to post
Share on other sites
4 hours ago, Alpinemaps said:

Were the heads available?  I checked an hour ago, and just now, and didn't see the heads.  They're showing out of stock.

There are still available when I logged in with my account.  May be there is an allocation depending on where are you from even they are from the same warehouse.

stock.thumb.jpg.6ed8c94c4e8be5e606a218421e57b41b.jpg

Share this post


Link to post
Share on other sites

Nope. Not working for me. But your are in NZ so your are tomorrow. Maybe at midnight here

13 minutes ago, Pchan1983 said:

There are still available when I logged in with my account.  May be there is an allocation depending on where are you from even they are from the same warehouse.

stock.thumb.jpg.6ed8c94c4e8be5e606a218421e57b41b.jpg

 

Share this post


Link to post
Share on other sites
7 hours ago, Pchan1983 said:

There are still available when I logged in with my account.  May be there is an allocation depending on where are you from even they are from the same warehouse.

stock.thumb.jpg.6ed8c94c4e8be5e606a218421e57b41b.jpg

 

Pretty weird, these are only available when I log in with NZ as country, but no other country. Why on earth would Lego only have these for New-Zealand?

 

Share this post


Link to post
Share on other sites

BOWLS from 80101 are available!!! In the US at least

7 hours ago, anothergol said:

 

Pretty weird, these are only available when I log in with NZ as country, but no other country. Why on earth would Lego only have these for New-Zealand?

 

Probably has to do with the warehouses that have them verse ones that are still out of stock

The "man bun" piece and the printed cap frm 80102 are available 

Share this post


Link to post
Share on other sites
29 minutes ago, BaristaBricks said:

BOWLS from 80101 are available!!! In the US at least

Probably has to do with the warehouses that have them verse ones that are still out of stock

The "man bun" piece and the printed cap frm 80102 are available 

Also in EU :) 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.