Jim Posted November 27, 2015 TECHNIC A PLUS B MODEL CONTEST ENTRY TOPIC CONTEST INFORMATION More information about the contest can be found in the general discussion topic. WHAT DO I NEED TO ENTER? Please take a careful look at the rules before posting in this topic. Each participant is obliged to create a post in this entry topic. Posts need to follow the rules stated below. Posts not following the rules will be disqualified so please read them carefully. ENTRY POST The entry post in this topic needs to contain: Entry name Short summary of the functions. One or more images (max 10) One or two videos (mandatory) Link to the discussion topic State the dimensions (in studs) of both models (HxWxL, 17x17x34=9826) Bounding box BOUNDING BOX Each model should have a picture where the bounding box is clearly visible. The bounding box is a contruction to show the dimensions of the model. More information about this can be found in the information topic. IMPORTANT This topic should be used for entries only, so commenting is prohibited. Please use the general discussion topic for comments on the entries. Share this post Link to post Share on other sites
lcvisser Posted January 25, 2016 1. Combine Harvester / Hot Rod A-model: Combine Harvester Functions: Rotating header, driven by the front wheels via a differential Engage/disengage header rotation via switch on the side Raising and lowering of the header via knob wheel on the top HOG steering via knob wheel on the top Extendable unloading auger (manual function) Removable header The dimensions of the model are WxLxH = 30x25x13 = 9750 cubic studs and consists of 400 parts. B-model: Hot Rod Functions: Working V8 engine driven by rear wheels via differential HOG steering The dimensions of the model are WxHxL = 12x12x28 = 4032 cubic studs and it uses approximately 70% of the parts of the A-model. Here is a movie showing all the functions of both models and some additional photos: The discussion topic can be found here. High-resolution and additional photos can be found on my Bricksafe page. Share this post Link to post Share on other sites
Krall Posted January 25, 2016 2. Forklift/Tow truck A Model - Forklift Functions: - HoG steering - Forks lifting - Forks tilting - Openable bonnet with fake engine Video B Model - Tow truck Functions: - HoG steering - Wheel lift - winch Video Topic: http://www.eurobrick...ic=118406&st=25 Share this post Link to post Share on other sites
Thirdwigg Posted January 25, 2016 3. Snowblower / Tractor Model A, Snowblower Functions: HxWxL, 17x17x34=9826 Steering, HOG 2 Cylinder Fake Motor Rear Wheel Drive, Portal Axle Front PTO, Snowblower Rotation Snowblower Lift Salt Discharge/Moving Door Salt Spreader Removable Blower, Cab, and Spreader HxWxL, 17x17x34=9826 Model B, Tractor Functions: HxWxL, 14x21x34=9996 Steering, HOG 2 Cylinder Fake Motor Rear Wheel Drive, Portal Axle (kindof) PTO, Front/Rear Plow Lift Seeder Lift Seeder Spreader Removable Hopper, Seeder, and (with a little more work) front plow. HxWxL, 14x21x34=9996 Video More Pictures Flickr gallery may be found here, and full gallery with instructions here, and the youtube video .Eurobricks Discussion Topic The WIP and discussion topic may be found here. Share this post Link to post Share on other sites
JamesJT Posted January 26, 2016 (edited) 4. Compact Sports Plane / Airport Crash Tender A Model - Compact Sports Plane SUV has HoG steering Trailer has a trailer jack Plane retractable landing gear, a ratchet engine for the propeller and folding wings B Model - Airport Fire Tender Has HoG Steering. Adjustable boom and directional hoses. [media] [media]A model is 13x11x67 = 9581 B model is 16x15x37 = 8880 Topic http://www.eurobrick...howtopic=117852 Edited January 27, 2016 by JamesJT Share this post Link to post Share on other sites
Serhio Posted January 27, 2016 5. Fire Truck / Forklift Model A: Fire Truck Steering with HOG Folding legs Two-piece boom, driven by two (large and small) actuators Boom max height aprox. 50 cm. Boom rotates on turntable Openable doors HxWxL, 18x15x37=9990 About 780 pcs Bounding box: Model B: Forklift Steering with HOG Foldable frame Boom driven by large actuator Foldable fork HxWxL, 17x15x37=9435 About 710 pcs (90% usage) Bounding box: Discussion topic: http://www.eurobrick...howtopic=118886 Share this post Link to post Share on other sites
Technivor Posted January 28, 2016 6. Mine loader/ Mine flatbed truck Model A: HOG steering; Operating boom and bucket 3cylinder engine HxWxL= 45x13x11= 6435cubic studs About 700 pcs Video: Model B: HOG steering 2 cylinder engine Lifting ofthe bed HxWxL= 16x16x37= 9472cubic studs About 650pcs Discussion topic: http://www.eurobrick...pic=117971&st=0 Share this post Link to post Share on other sites
Appie Posted January 28, 2016 7. Pneumatic forklift / Bucket truck Model A: Forklift Functions: - Pneumatic lift and tilt - 4 cylinder fake engine - HOG steering (and the steering wheel in the cabin moves along with it) - Pendular rear axle - Fork width adjustment (manual) Dimensions of the model: 34x14x17.5 studs (8330 cubic studs) Model B: Bucket truck Functions: - Pneumatic bucket lift - 4 outriggers with pneumatics - 2 cylinder fake engine - HOG steering - Crane turning radius 170 degrees (manual) Dimensions of the model: 34x13x17 studs (7514 cubic studs) Both models shown in this video: More images and information in this discussion topic Share this post Link to post Share on other sites
9v system Posted January 29, 2016 Disqualified GBC module/ skyscraper building model A: GBC module functions moves balls according to the standard bidirectional rotation can be hand cranked or powered by mains uses system bricks dimensions: unknown Model B: skyscraper bulding functions( in progress) Share this post Link to post Share on other sites
muffinbrick Posted January 29, 2016 8. Roadster / Hotrod Model A: Functions: Rear differential conected to fake 4 piston boxer motor HOG steering + functional steering wheel Foldable roof operated by small LA Openable doors, bonets, front bonet with safe stick Adjustable seats, removable spare wheel, foldable mirrors dimensions: 42x17x14=9996 more pics: http://bricksafe.com...odel---roadster Model B: Functions: Rear differential conected to fake 4 piston streight motor HOG steering + functional steering wheel Openable doors Adjustable bench back, adjustable mirrors in two axles dimensions: 42x19x12=9576 more pics:http://bricksafe.com...-model---hotrod Video: Discussion topic: http://www.eurobrick...howtopic=117823 Share this post Link to post Share on other sites
BusterHaus Posted January 30, 2016 9. Sun Speeder / Sun Stinger Sun Speeder (A Model) An open-wheel race car. Model A dimensions are estimated: 17 wide 32 long 12 high 6518 cubic studs Features: - Independent front and rear suspension - HOG and cabin steering - Engine - Differential (13 stud wide frame) - Opening door Sun Stinger (B Model) A trophy truck. Model B dimensions: 17 wide 34 long 15 high 8670 cubic studs Features: - Independent front suspension - Dragged axle rear suspension - Cabin steering - Engine - Differential - Opening differential cover Discussion topic is here: http://www.eurobrick...howtopic=119224 Video presenting both models: Share this post Link to post Share on other sites
Jurss Posted January 30, 2016 10. Garden Tractor/Combine Harvester A - model: Garden tractor Size 38x15x12=6840cs Functions: - Steering - Working engine cylinder - Driven blades from rear wheels - Risable bed of trailer - Suspended seat - All attachments - trailer, mover, plouhgh - easy removable - Plough could be moved up/down un from side to side Parts B-model: Combine/Harvester Size 24x19x13=5928cs Functions: - HOG steering - Openable unloder (open/closed positions held by shock absorber) - Raisable/lowerable header Leftover parts from A-model There is also C-model in discussion topic http://www.eurobrick...pic=117859&st=0 Share this post Link to post Share on other sites
deehtha Posted January 31, 2016 11. Trophy Truck / 6 Wheeled Vehicle My A model is a Trophy Truck. Dimensions are 17w x 34l x 16t for a volume of 9248cs. Features Independent front suspension Live axle rear suspension Steering via HoG Working mini v8 engine Opening hood 2 spare tires All my pieces. I used about 675 pieces B-Model is a 6 Wheeled, Articulated vehicle Dimensions are 13w x 37l x 13t for a volume of 6253cs. Features Articulated body Trailing arm "suspension" on middle axle Steering via HoG Working mini v8 engine Opening engine cover with adjustable louvres Opening storage compartment Brickshelf folder: http://www.brickshel...ry.cgi?f=560991 video Share this post Link to post Share on other sites
MacKaiwer Posted January 31, 2016 12. Three-Wheeler / Trike A model: Three-Wheeler has backwheel steering, front axle driven and pistons working 4 cylinder flat engine and openable doors. Parts are only from set 42039. Final A model and all parts: Bounding box 20x38x13=9880: Bounding box picture was shot at earlier stage of building so visuals have changed a bit but dimensions are same in final build. B model: Trike has rear axle driven and pistons working V4 engine. Left over parts: Bounding box 30x22x15=9900: Same here, bounding box picture was shot at earlier stage of building so visuals have changed a bit but dimensions are same in final build. Video: Link to discussion: http://www.eurobricks.com/forum/index.php?showtopic=118018 Share this post Link to post Share on other sites
JJ2 Posted January 31, 2016 13. 4x4 Racer / Trike A-model: 4x4 Racer Functions: A. Full suspension B. Working V2 engine C. 4x4 drive chain with 3 differentials D. Adjustable seat headrests E. Working steering wheel F. Openable glovebox The finished dimensions are: Length-37 studs, Width-17 studs, and Height-14 studs = 8806 cubic studs B-model: Trike Functions: A. Full suspension B. HOG steering C. Posable handle bars The finished dimensions are: Length 29 x Width 19 x Height 18 = 9918 cubic studs IMG_0057 by JJ2Sam, on Flickr Discussion topic is HERE All images can be found on my FLICKR page Share this post Link to post Share on other sites
lindr6 Posted January 31, 2016 14. JCB Skid Steer & Front Loader A Model: JCB Skid Steer: Functions: - Mini Linear Actuator Raise/Lower Boom - Manual Bucket Dump - Working Fake 3 Cylinder Diesel Engine - Four Wheel Drive (All wheels turn when any one wheel turns) - Left/Right wheels can turn in same or opposite directions to turn - Quick Detach Bucket Attachment Dimensions: - Length: 25 studs - Width: 11 studs - Height: 16 studs - Box Volume: 4400 studs B Model: JCB Front Loader: Functions: - Mini Linear Actuator To Raise/Lower Bucket - Manual Bucket Dump - Working Fake Three Cylinder Engine - Rear Wheel Drive With Differential - Rear Perpendicular Suspension - Articulated Steering Dimensions: - Length: 35 Studs - Width: 12 Studs - Height: 16 Studs - Box Volume: 6720 Studs Discussion Topic Link: http://www.eurobrick...howtopic=120641 Video of A & B Model: A Model: HxWxL: 16x11x25=4400 Studs No bounding box picture as model was disassembled prior to the requirement. B Model: HxWxL: 16x12x35=6720 Studs Share this post Link to post Share on other sites
syclone Posted January 31, 2016 15. Street Racer/European Style Truck Discussion topic: http://www.eurobrick...06#entry2424293 Photos: http://bricksafe.com/pages/LXF/tc a-model HOG steering mini fake v6 pneumatic gull-wing doors dimensions:56103 studs video: b-model HOG steering mini v6 fake engine fifth wheel openable doors dimensions:80643 studs Share this post Link to post Share on other sites
zweihander Posted January 31, 2016 16. Manitou Telehandler / B807 Hot Rod Manitou Telehandler - Pneumatic Boom Lifting - Pneumatic Outriggers - Boom Extension - HoG Steering - Adjustable Attachment Angle - Folding Forks - Openable Cabin Door Dimensions (WxHxL) : 16x16x36 = 9216 cubic studs Presentation Video: Manitou Telehandler Flickr Album B807 Hot Rod - Pneumatic Doors - HoG Steering - V10 Engine Dimensions (WxHxL) : 16x12x37 = 7104 cubic studs Note: To take the bounding box image, I had to build it again with spare pieces. So it has some missing pieces and wrong colored pieces. Presentation Video: B807 Hot Rod Flickr Album WIP Discussion Topic Share this post Link to post Share on other sites
Zerobricks Posted January 31, 2016 (edited) 17. Rally Racer / F1 Car Here is my entry for the TC9 challenge A MODEL It is made out of 949 parts and it has functions including but not limted to: - All wheel drive - Independent suspension on all wheels - Working gearbox - Moving V6 piston engine - Working steering wheel - Adjustable seats - Openable doors and trunk - Detailed rollcage - Sporty colors and livery - Power Functions ready The front is full of lights and LED bars Notice the massive rear spoiler, massive exhaust system and the rear diffuusor Doors and the rear boot open, showing the internal rollcage and adjustable seats Size of the car is 35,5 studs long, 20,5 studs wide and 13,5 studs high, giving a total of 9824,626 cubic studs And the usual "money shot" of the chassis. The suspension and drive use a hybrid drive system with the drive axle used like an live axle, yet wheels suspended in a independent double wishbone configuration. B MODEL Rally car rebuilds into an F1 car with following functions: - Realistic working pushrod suspension - Moving V6 piston engine driven by rear wheels - Working steering wheel - Adjustable spoiler - Openable rear to - Detailed engine bay with six exhausts The F1 car is a very low and stable model Notice the rear wheel drive, rear light, the detailed diffusor and the rear springs Rear covers can open up, exposing the pushord suspension, V6 engine and the 6 exhaust systems B model is 45 studs long, 24,5 studs wide and just 9 studs high, giving it a total volume of 9922,5 cubis studs Video: Click here for the discussion topic Edited February 2, 2016 by Jim Removed C-model Share this post Link to post Share on other sites
