Darats Posted May 26, 2015 Update: 2015/05/26 Download link on first page. 4151: Plate 8 x 8 with Grille without Hole 4151a: Plate 8 x 8 with Grille without Hole 4151b: Plate 8 x 8 with Grille with Hole 4162p01: Tile 1 x 8 with "Robie House" Pattern 4162p02: Tile 1 x 8 with "Farnsworth House" Pattern 4162p03: Tile 1 x 8 with "Fallingwater" Pattern 4162p04: Tile 1 x 8 with "The White House" Pattern 4162p05: Tile 1 x 8 with "Burj Khalifa" Pattern 4162p06: Tile 1 x 8 with "Brandenburg Gate" Pattern 4162p07: Tile 1 x 8 with "Brandenburger Tor" Pattern 4162p08: Tile 1 x 8 with "Sears Tower" Pattern 4162p09: Tile 1 x 8 with "Willis Tower" Pattern 4162p0a: Tile 1 x 8 with "John Hancock Center" Pattern 4162p0b: Tile 1 x 8 with "Empire State Building" Pattern 4162p0c: Tile 1 x 8 with "Seattle Space Needle" Pattern 4162p0d: Tile 1 x 8 with "Sydney Opera House" Pattern 4162p0e: Tile 1 x 8 with "Sungnyemun" Pattern 4162p0g: Tile 1 x 8 with "Big Ben" Pattern 4162p0l: Tile 1 x 8 with "Villa Savoye" Pattern 4162p0o: Tile 1 x 8 with "Imperial Hotel" Pattern 4162p0p: Tile 1 x 8 with "Leaning Tower of Pisa" Pattern 4162p0q: Tile 1 x 8 with "United Nations" Pattern 4162p0r: Tile 1 x 8 with "Headquarters" Pattern 4162p0s: Tile 1 x 8 with "The Eiffel Tower" Pattern 4162p0t: Tile 1 x 8 with "La tour Eiffel" Pattern 4162p0u: Tile 1 x 8 with "Marina Bay Sands" Pattern 4162p0v: Tile 1 x 8 with "Trevi Fountain" Pattern 4162p0x: Tile 1 x 8 with "Lincoln Memorial" Pattern 4162p0y: Tile 1 x 8 with "Flatiron Building" Pattern Share this post Link to post Share on other sites
Darats Posted May 29, 2015 Update: 2015/05/29 Download link on first page. 4208: Hose Reel 2 x 4 x 2 Drum 4209: Hose Reel 2 x 4 x 2 Holder 4210a: Minifig Tool Hose Nozzle with Handle 4215a: Panel 1 x 4 x 3 4215b: Panel 1 x 4 x 3 with Hollow Studs 4220: Arm Piece with Grab Jaw Holder 4220a: Arm Piece with Grab Jaw Holder with Round Middle Finger 4220b: Arm Piece with Grab Jaw Holder with Truncated Middle Finger 4221: Grab Jaw 4228: Slope Brick 33 5 x 6 x 2 Inverted 4229: Plate 2 x 2 with Jet Engine 4285a: Dish 6 x 6 Inverted Webbed Type 1 4285b: Dish 6 x 6 Inverted Webbed Type 2 4288: Tyre Balloon 4346: Container Box 2 x 2 x 2 Door with Slot 4346p61: Container Box 2 x 2 x 2 Door with Slot and Spyrius Pattern 4346p68: Container Box 2 x 2 x 2 Door with Slot and M Tron Logo Pattern 4349: Minifig Loudhailer 4360: Minifig Camera with Side Sight 4448: Glass for Windows 4 x 4 x 3 Roof 4460a: Slope Brick 75 2 x 1 x 3 with Open Stud 4460b: Slope Brick 75 2 x 1 x 3 with Hollow Stud 4474: Windscreen 6 x 4 x 2 Canopy Share this post Link to post Share on other sites
aeralure Posted June 5, 2015 Thanks Darats! I used to have a lot of those Space parts, but I'm starting Lego all over again now. At least I can see them digitally again now until I build a physical collection again. Share this post Link to post Share on other sites
Darats Posted June 5, 2015 (edited) Update: 2015/06/05 Download link on first page. 4476: Support 2 x 4 x 5 Stanchion Inclined 4479: Minifig Metal Detector 4485: Minifig Cap with Long Flat Peak 4522: Minifig Tool Mallet 4589: Cone 1 x 1 4592: Hinge Control Stick Base 4593: Hinge Control Stick 4596: Plate 1 x 2 with 3L Extension and Stud Hole 4624: Wheel Rim 6.4 x 8 4735: Brick 1 x 1 x 2/3 Round with Bar and Clip Vertical 4736: Minifig Jet-Pack with Stud on Front 4737: Panel 4 x 4 x 6 Outward Sloping Corner 4740: Dish 2 x 2 Inverted 4741: Window 4 x 4 x 6 Outward Sloping 4746: Tail 4 x 2 x 2 with Rocket 4755: Electric Plate 1 x 2 with Contacts 4757: Electric Plate 2 x 4 with Contacts 4758: Electric Plate 2 x 8 with Contacts Edited June 5, 2015 by Darats Share this post Link to post Share on other sites
Darats Posted June 23, 2015 Update: 2015/06/23 Download link on first page. 973p26: Minifig Torso with Patch Pocket Pattern 3069bp14: Tile 1 x 2 with Arrow Long Yellow without Border Pattern 3823: Windscreen 2 x 4 x 2 4084: Tyre 8/75 x 8 Offset Tread 4215ap10: Panel 1 x 4 x 3 with White UNICEF Logo Pattern 4346p60: Container Box 2 x 2 x 2 Door with Slot with Controls Pattern 4346ps2: Container Box 2 x 2 x 2 Door with Slot and Sith Pattern 4760: Electric 9V Battery Box 4 x 8 x 2.333 Cover 4760c01: Electric 9V Battery Box 4 x 8 x 2.333 (Complete) 4760p01: Electric 9V Battery Box 4 x 8 x 2.333 Cover with "9V" Pattern 4760p01c01: Electric 9V Battery Box 4 x 8 x 2.333 with "9V" Pattern (Complete) 4761: Electric 9V Battery Box 4 x 8 x 2 1/3 Lid 4762: Electric 9V Battery Box 4 x 8 x 2.333 Switch 4767a: Electric Light & Sound Brick 1 x 2 with Single Top Light - Top 4768: Electric Light & Sound Brick 1 x 2 with Single Top Light - Base 4769: Electric Light & Sound Bulb Inner Cover 4770: Electric Light & Sound Coloured Globe 4771: Electric Light & Sound Brick 1 x 4 with Twin Top Lights 4771a: Electric Light & Sound Brick 1 x 4 with Twin Top Lights - Top 4772: Electric Light & Sound Brick 1 x 4 with Twin Top Lights - Base 73664: Electric Light & Sound Brick 1 x 4 with Twin Top Lights 73666: Electric Light & Sound Brick 1 x 2 with Single Top Light Share this post Link to post Share on other sites
Darats Posted June 30, 2015 Update: 2015/06/30 Download link on first page. 2552 - Baseplate 32 x 32 Raised with Ramp and Pit 2552p02 - Baseplate 32 x 32 Raised with Ramp and Pit with Light Grey and Dark Grey Craters Pattern Note : Due to the complexity of this pattern, this part could be extremely long to render if you are using very high quality radiosity settings (the picture above took me 7H to render), on low settings time should be more acceptable. Share this post Link to post Share on other sites
Darats Posted July 3, 2015 Update: 2015/07/03 Download link on first page. 20 - Wheel Center Small for Steel Axle 122c01 - Plate 2 x 2 with Red Wheels (Complete) 122c02 - Plate 2 x 2 with White Wheels (Complete) 422 - Plate 2 x 2 with Axle Brackets 973p1t - Minifig Torso with Red Truck Pattern 973p13 - Minifig Torso with Straight Zipper Jacket Pattern 973p70 - Minifig Torso with Bomber Jacket & Black Shirt Pattern 2484 - Car Wheel Holder 2 x 2 with Suspension - Top 2484c01 - Car Wheel Holder 2 x 2 with Suspension 2485 - Car Wheel Holder 2 x 2 with Suspension - Bottom 2542 - Minifig Tool Oar 2550 - Animal Monkey Body 2550c01 - Animal Monkey (Complete, Crouching) 2550c02 - Animal Monkey (Complete, Standing) 3068bp0a - Tile 2 x 2 with Safari Pattern 3069bp02 - Tile 1 x 2 with Tape Reels Pattern 3135 - Slope Brick 45 2 x 3 x 1 & 1/3 Double Crane 3135c01 - Slope Brick 45 2 x 3 x 1 & 1/3 Double with Hook (Complete) 3135c02 - Slope Brick 45 2 x 3 x 1 & 1/3 Double with Light Gray Hook 3135c03 - Slope Brick 45 2 x 3 x 1 & 1/3 Double with Black Hook 3136 - Crane Hook with 4 Studs 3482 - Wheel Rim 8 x 17.5 with Axlehole 3626bp7e - Minifig Head with Blue Sunglasses and Stubble Pattern 3629 - Minifig Hat Cowboy 3821 - Door 1 x 3 x 1 Right 3821p01 - Door 1 x 3 x 1 Right with Safari Stripes Pattern 3821p03 - Door 1 x 3 x 1 Right with Yellow / Red Stripes Pattern 3822 - Door 1 x 3 x 1 Left 3822p01 - Door 1 x 3 x 1 Left with Safari Stripes Pattern 3822p03 - Door 1 x 3 x 1 Left with Yellow / Red Stripes Pattern u9070 - Car Wheel Holder 2 x 2 with Suspension - Spring u9132 - Axle Steel 4 x 72 LDU u9132c01 - Axle Steel 4 x 72 LDU with Two Wheels 4 x 8 Share this post Link to post Share on other sites
Darats Posted July 10, 2015 Update: 2015/07/10 Download link on first page. 2349: Hinge Car Roof 4 x 4 Sunroof without Ledges 2349a: Hinge Car Roof 4 x 4 Sunroof without Ledges 2349b: Hinge Car Roof 4 x 4 Sunroof with Ledges 2486: Bar 1 x 8 x 2 2524: Minifig Backpack Non-Opening 2546: Animal Bird Parrot 2547a: Animal Shark Body Type 1 2547ac01: Animal Shark Type 1 (Complete) 2547b: Animal Shark Body Type 2 2547bc01: Animal Shark Type 2 (Complete) 2548: Animal Shark Head 2614: Minifig Tool Fishing Rod 4150p00: Tile 2 x 2 Round with Film/Tape Reel Pattern 4212b: Car Base 4 x 10 x 0.667 with 2 x 2 Center Open 4773a: Electric Light & Sound Brick 2 x 2 x 1.333 Siren Top 4774: Electric Light & Sound Brick 2 x 2 x 1.333 Siren Base 4774c01: Electric Light & Sound Brick 2 x 2 x 1.333 Siren (Complete) 4784: Staircase 4 x 6 x 7 1/3 Enclosed Straight 4858p01: Wedge 4 x 4 with Blacktron I Logo 4858p90: Wedge 4 x 4 with Classic Space Pattern Share this post Link to post Share on other sites
harvey2015 Posted July 15, 2015 What about the winshield part as well as 2 of the curved plates on the tram part of the city square set? I am making the same tram inspired by the city square set, just with a few differences and a completely different livery. The main differences are the the orange lights which would flash whenever the tram picks up/drops off passengers. They would often be on the outside of the black tile piece (which shows the tram line # and destination). I got that inspiration from this: http://www.myweb.net.au/mottram/trams/cand/cand77.jpg The tram lights are at the bottom, but I found it better to be placed beside the destination board. Share this post Link to post Share on other sites
Darats Posted July 16, 2015 (edited) That's a request? Just give me the part numbers you want and I will manage to add them in the next update. Just a remark: you seem to use LDD, how can you use my LGEO library? It is more intended to be used together with Ldraw. Edited July 16, 2015 by Darats Share this post Link to post Share on other sites
Darats Posted July 16, 2015 Update: 2015/07/16 Download link on first page. 476 - Bar 12L with Hollow Studs, Towball and Slit 4095 - Bar 6.6L with Stop 4862 - Glass for Window 1 x 2 x 2 Plane 4863 - Window 1 x 4 x 2 Plane 4864a - Panel 1 x 2 x 2 with Solid Studs 4864b - Panel 1 x 2 x 2 with Hollow Studs 4865 - Panel 1 x 2 x 1 with Square Corners 4865a - Panel 1 x 2 x 1 with Square Corners 4865b - Panel 1 x 2 x 1 with Rounded Corners 4865p06 - Panel 1 x 2 x 1 with Black Grille Pattern 4872 - Windscreen 3 x 4 x 4 Inverted 5306a - Electric Brick 2 x 2 x 2/3 6014 - Wheel Rim 11.2 x 10.4 6015 - Tyre 12/40 x 11 Wide 6016 - Bar 1 x 4 x 3 Window 6023 - Minifig Jet Pack with 2 Octogonal Nozzles 6048 - Arm Piece with Pin and 2 Fingers 6058 - Cockpit 4 x 11 x 2 & 2/3 6064 - Plant Bush 6070 - Windscreen 5 x 2 x 1 & 2/3 Share this post Link to post Share on other sites
harvey2015 Posted July 16, 2015 (edited) That's a request? Just give me the part numbers you want and I will manage to add them in the next update. Just a remark: you seem to use LDD, how can you use my LGEO library? It is more intended to be used together with Ldraw. Hello Darats, I'd like part #18980, #18646, and #18973 for the next LDD update. Thank you Edited July 16, 2015 by harvey2015 Share this post Link to post Share on other sites
Darats Posted July 16, 2015 I can do them, but have you clearly understood that this is for LGEO and not LDD ??? Share this post Link to post Share on other sites
harvey2015 Posted July 17, 2015 Hello Darats, I've clearly understood this is for LGEO, not LDD Share this post Link to post Share on other sites
Darats Posted July 17, 2015 Ok, then I'll make the parts, but then why did you said you want them for the next LDD update? Share this post Link to post Share on other sites
Darats Posted July 18, 2015 Update: 2015/07/18 Download link on first page. 6099 - Baseplate 32 x 32 Road 9-Stud Landing Pad 6099p02 - Baseplate 32 x 32 Road 9-Stud Landing Pad with Green Octogon Pattern 6099p03 - Baseplate 32 x 32 Road 9-Stud Landing Pad Type 1 (Yellow) 6099p04 - Baseplate 32 x 32 Road 9-Stud Landing Pad Type 1 (Orange) 6117 - Minifig Tool Chainsaw Blade 6118 - Wheel Hard-Plastic Small 6120 - Minifig Ski 4L with Hinge 6157 - Plate 2 x 2 with Wheels Holder Wide 6238a - Windscreen 4 x 4 x 1 Type 1 6269 - Minifig Goblet with Hollow Stem 6636p01 - Tile 1 x 6 with "Rockefeller" Pattern 6636p02 - Tile 1 x 6 with "Center" Pattern 6636p03 - Tile 1 x 6 with "Solomon" Pattern 6636p04 - Tile 1 x 6 with "R. Guggenheim" Pattern 6636p05 - Tile 1 x 6 with "Museum" Pattern 10201 - Bracket 1 x 2 - 1 x 4 with Rounded Corners 11211 - Brick 1 x 2 with Two Studs on One Side 12939 - Arch 1 x 6 x 2 with Thin Top 14769 - Tile 2 x 2 Round with Round Underside Stud 15068 - Slope Brick Curved 2 x 2 x 0.667 15573 - Plate 1 x 2 with Groove with 1 Center Stud, without Understud 18646 - Plate 3 x 6 Round Half with 1 x 2 Cutout 18973 - Windscreen 6 x 4 x 1.333 Curved 18980 - Plate 2 x 6 with Two Rounded Corners 30027 - Wheel Rim 8 x 8 Round Hole for Wheel Holding Pin 30027a - Wheel Rim 8 x 8 Round Hole for Wheel Holding Pin 30027b - Wheel Rim 8 x 8 Notched Hole for Wheel Holding Pin 30033 - Plate 2 x 2 with Rod Frame Octogonal Share this post Link to post Share on other sites
9v system Posted July 18, 2015 Could you please do these parts 2838 , 2986 , 5292, 9v train motor and rc train motor. Share this post Link to post Share on other sites
Darats Posted July 19, 2015 Complicated parts... I will try to make them for the next update. Share this post Link to post Share on other sites
harvey2015 Posted July 21, 2015 Ok, then I'll make the parts, but then why did you said you want them for the next LDD update? So I can finish off the tram that I posted in the pic lol. Share this post Link to post Share on other sites
Darats Posted July 21, 2015 (edited) So I can finish off the tram that I posted in the pic lol. So you are using my LGEO parts together with LDD, how can you do that? By the way, your 3 parts are now in my LGEO package. Edited July 21, 2015 by Darats Share this post Link to post Share on other sites
Darats Posted July 26, 2015 Update: 2015/07/26 Download link on first page. 2837 - Electric Technic Motor 9V Shaft 2837b - Electric Technic Motor 9V Top 2838 - Electric Technic Motor 9V Base 2838c01 - Electric Technic Motor 9V 2986c01 - Electric Technic Micromotor (Complete) 30377 - Minifig Mechanical Arm 30395 - Hook with Towball 30602 - Slope Brick Curved Top 2 x 2 x 1 32013 - Technic Angle Connector #1 32123a - Technic Bush 1/2 Smooth with Axle Hole Reduced 32123b - Technic Bush 1/2 Smooth with Axle Hole Semi-Reduced 32198 - Technic Gear 20 Tooth Bevel 32530 - Technic Tile 1 x 2 with Two Holes 41747 - Wedge 2 x 6 Double Right 41748 - Wedge 2 x 6 Double Left 43712 - Wedge 6 x 4 Triple Curved 43898 - Dish 3 x 3 Inverted 44375a - Dish 6 x 6 Inverted with Hollow Studs 44375b - Dish 6 x 6 Inverted with Solid Studs 47753 - Wedge 4 x 4 Triple Curved without Studs 50746 - Slope Brick 31 1 x 1 x 0.667 57515 - Technic Suspension Arm 2 x 6 57585 - Technic Bush with Three Axles 59443 - Technic Axle Joiner Inline Smooth 59900 - Cone 1 x 1 with Stop Share this post Link to post Share on other sites
___ Posted July 31, 2015 (edited) So you are using my LGEO parts together with LDD, how can you do that? By the way, your 3 parts are now in my LGEO package. No, he cannot use your LGEO in LDD, no way...he has no clue what he is talking about quite evidently. The only possible usage of your LGEO for LDD would be during POV-Ray render of his LDD .lxf file but it would be quite complicated with part that really is not present in LDD cos he would need to make kind of brick placeholder to make his model and before actual rendering he would need to delete it from his .lxf and replace it with that LGEO part in POV-Ray .inc file for the respective .lxf - way complicated but theoretically could be done (I have done exactly this with crater baseplate for some of my LDD models). Edited July 31, 2015 by bublible Share this post Link to post Share on other sites
Darats Posted August 1, 2015 Update: 2015/08/01 Download link on first page. 60212 - Car Mudguard 2 x 4 with Central Hole 60475a - Brick 1 x 1 with Clip Vertical (Thick U-Clip) and Solid Stud 60478 - Plate 1 x 2 with Handle on End 60897 - Plate 1 x 1 with Clip Vertical (Thick C-Clip) 61252 - Plate 1 x 1 with Clip Horizontal (Thick C-Clip) 62462 - Technic Pin Joiner Round with Slot 64225 - Wedge 4 x 3 Triple Curved without Studs 71183 - Bar 1L with Light Holder 73092 - Magnet Cylindrical in Casing (Complete) Black 85863 - Microfig 85984 - Slope Brick 31 1 x 2 x 0.667 87081 - Brick 4 x 4 Round with Pinhole and Snapstud 92280 - Windscreen 2 x 3 x 2 on 2 x 4 Base 92438 - Plate 8 x 16 93061 - Arm Skeleton with Vertical Clip Bent 53.13 93590 - Car Mudgard 2 x 4 with Headlights and Curved Fenders Share this post Link to post Share on other sites
___ Posted August 1, 2015 Please, could you also make all those "normal" bricks (like 1x1, 1x2,...1x16, 2x2, 2x3...etc.)? Share this post Link to post Share on other sites
Darats Posted August 1, 2015 I first need to complete the parts I still have to have everything ready for the ldraw AIOI release. Then, these parts are already existing in the LGEO library so it's not priority for me. I guess you want them to use them in Bluerender. Have you managed to use Poseray properly? And again, there won't be studs with those parts. Share this post Link to post Share on other sites
