Jurss Posted August 19, 2016 Last evening accidentally appeared HOG steering. Share this post Link to post Share on other sites
syclone Posted August 19, 2016 I like when accidents like this happen :) Share this post Link to post Share on other sites
Jurss Posted August 19, 2016 Couldn't call it otherway. I looked at car, and noticed something missing. Then I realized :D , that standard steering for Technics car isn't enough. I looked at what i got, put some parts together, and everything fitted in existing body. Just need to put longer main axle from steering, to connect to HOGS. Share this post Link to post Share on other sites
jgw Posted August 19, 2016 Just like LXF, this accident are one of the few accidents that are allowed to happen. I watched this tread for some time, and you developed in my opinion a nice own style! With the panels and liftarms combined, this KTM is starting to look like something! Share this post Link to post Share on other sites
Jurss Posted August 24, 2016 , this KTM is starting to look like something! It seems, that i found finally right size. First versions was just too big. Almost finished. Need some fine tuning. Maybe need to put some lights and rear view mirrors (don't know where to attach them). Of course, better pictures. I think I've made also TC10 entry Share this post Link to post Share on other sites
Jurss Posted August 26, 2016 It started 1.5 years ago. Now, I think, it's finished. At the begginning "wrong" scale has been selected. But I didn't had these wheels at that time, and even much less parts. At the and it has: full independent suspension, working engine working steering wheel HOG steering look like a KTM x-bow Don't know what's wrong with bricksafe, bu it's resizes this pictures to tryed to resize it, crop differently, but always the same after upload. Once again sexy side If somebody has questions about rear independent suspension and connection to differential - yes, it is littlebit incorrect, because axles are going directly inside differential, but at that low travel of suspension, it works with no problems. Some pircture, where engine is wisible I don't have orange 5x11 panels. Yes, I could by, but i've spent allready pretty much money on lego during last year. So Lego budget is empty. I've never been so wrong ... Share this post Link to post Share on other sites
z3_2drive Posted August 26, 2016 This is an awesome little MOC, perfect scale, would like to see it with black wheels. Do you plan on making instructions? Share this post Link to post Share on other sites
Victor Imaginator Posted August 26, 2016 Jurss, it's very cool. Looks very close to original. And orange, i like orange. 1,5 years of development just add more awesomeness. Followed this topic almost from the beginning with hope that you will finish it some day) Share this post Link to post Share on other sites
Lego2016Lego Posted August 26, 2016 (edited) Looks very nice! Can you plz do LDD! And if you don't. Edited August 26, 2016 by Lego2016Lego Share this post Link to post Share on other sites
KamalMYafi Posted August 26, 2016 (edited) Looks very cool! And wow, a long time project! Any chance for instructions? Edited August 26, 2016 by KamalMYafi Share this post Link to post Share on other sites
Jurss Posted August 26, 2016 Thank You! Sorry, but there will be no instructins, no LDD. I just don't have time for that. I could only remove bodywork, take hires pictures, answer to some questions. Share this post Link to post Share on other sites
syclone Posted August 26, 2016 I can make an LDD file if you can provide detailed pictures Looks amazing! Share this post Link to post Share on other sites
Jurss Posted August 27, 2016 OK, I'll try to take the pictures tomarrow. I could make LDD mabe only in wintertime, some January or February, only if I still got car at that time Share this post Link to post Share on other sites
grum64 Posted August 27, 2016 Looks great. Completely recognisable. Share this post Link to post Share on other sites
LegoDego Posted August 27, 2016 Very nice KTM, I remember my first project, my first failure (so slow and slimpsy) You do much better, keep it up Share this post Link to post Share on other sites
Jurss Posted August 28, 2016 As I wrote, i realised, that I started with wrong scale Looks like You too Share this post Link to post Share on other sites
Jurss Posted September 5, 2016 Started to build LDD file. Share this post Link to post Share on other sites
Jurss Posted October 8, 2016 I just wanted to say, that I did not forgot about LXF. Had some time this evening Share this post Link to post Share on other sites
Jurss Posted November 2, 2016 Some LDD file for hints to build it http://bricksafe.com/files/Jurss/x-bow/ktm_xbow_f.lxf Share this post Link to post Share on other sites
Raj_UK Posted December 30, 2016 sorry for the bump ... but after building a non-Technic X-bow recently ... I'm looking for a brickstock/bricklink parts list and build instruction ... happy to contribute over paypal if necessary :) Share this post Link to post Share on other sites
Berthil Posted December 28, 2017 (edited) Why are so many parts Red in the .lxf and also in the BOM, am I doing something wrong? LDD and brick library is up to date (on a Mac). Bricklink parts list would be very welcome please. Building this for a friend who owns a 500 bhp Xbow and he took me for a ride, amazing. Edited December 28, 2017 by Berthil Share this post Link to post Share on other sites
Jurss Posted December 29, 2017 I'm just lazy and really don't have time for that, that's why there's is no parts list and red, because that just default color in LDD extended mode. That's why I'm asking also no money, just provide what is necessary. I better spend time on some new builds etc. Share this post Link to post Share on other sites
