Jurss Posted February 27, 2015 (edited) Lego Tehnincs for me started with 42000 set. First step to own creations was small B-model modification Then I started to create my own creations. At that time I didn't even knew about other "sick" peaople and forums like this. So, as a first post, littlebit about what I have created until now. First creations was only from parts of 42000. First creation was some trike (or something like this) with font wheel drive Then there was (street)quad Edited September 6, 2018 by Jurss Share this post Link to post Share on other sites
Jurss Posted February 27, 2015 (edited) Tractor Remake in LDD Plane with variable wing geometry . Geometry is changed byrotating round red knob Buggy RWD Edited February 27, 2015 by Jurss Share this post Link to post Share on other sites
Jurss Posted February 27, 2015 This was next creation http://www.eurobricks.com/forum/index.php?showtopic=106340 , after i bought 42030 RC VOLVO L350F WHEEL LOADER and 42037 FORMULA OFF-ROADER (just for some specific parts) Share this post Link to post Share on other sites
Jurss Posted April 7, 2015 Some fast RC buggy/offroader moc with rear wheel drive and steering. No suspension. Share this post Link to post Share on other sites
moneysovn Posted April 7, 2015 (edited) good,i like it ,Some fast RC buggy/offroader moc with rear wheel drive and steering. Edited April 7, 2015 by moneysovn Share this post Link to post Share on other sites
Nalyd997 Posted April 7, 2015 I like how you keep the lines of bodyworks clean, good job! Share this post Link to post Share on other sites
D3K Posted April 7, 2015 Nice use of the parts from 42000! Share this post Link to post Share on other sites
Jurss Posted April 18, 2015 Two creations in progress First i saw Valtras interesting steering system, and then i found Bull Share this post Link to post Share on other sites
Nalyd997 Posted April 18, 2015 I am looking forward to seeing the second one in action! But am I right in saying that the first one has either articulated or normal steering through all of those gears? Or does it have both? Share this post Link to post Share on other sites
Jurss Posted April 18, 2015 First one should have articulated steering. Second so far. Some video Share this post Link to post Share on other sites
Jurss Posted April 26, 2015 This years main topic - LMP1 I also made one, little bit different. It has steering and mechanical PF from Racers, and it is in size of them Color scheme - i know, it is "interesting" Share this post Link to post Share on other sites
captainmib Posted April 26, 2015 I like the chassis and the side and back. Looking good already. The front could use some work, maybe some more flexible parts? Share this post Link to post Share on other sites
Jurss Posted April 28, 2015 (edited) Made some changes Put some flex axle to cockpit, because for my eye there was something missing Made some changes in side view: - closed some gaps - brought one crosswise bar from up to down - rearranged exhaust topview Made picture of remowable front part. This is also answer, to that question, why there is hard to make something different. Front part, also axle, is connected with main body with two cross axles only. Even steering axle is holding front spoiler? in horizontal position. To change something: 1. i have to make front part higher (it will not look better) 2. Make whole car brighter 3. Remake steering, because now 12T gear ir restricting to put normal bars from body to front. 4. Make front part form standrd Lego bricks at all, not form technics parts 5. ? Some bonus video Edited April 28, 2015 by Jurss Share this post Link to post Share on other sites
Jurss Posted May 17, 2015 Another MOC from racer series. Something like dragster. Yes, 2 yellow parts, because i have 15l only in yellow, green or red. Share this post Link to post Share on other sites
-WINNER- Posted July 20, 2015 First photo is cool! I think, it looks like a kind of buggy, not dragster. Share this post Link to post Share on other sites
Jurss Posted September 27, 2015 Something pullback with all wheel drive. Body is just to look something like car. Share this post Link to post Share on other sites
Jurss Posted September 27, 2015 Something like Mercedes. Something like offroad, agriculture truck. Steering (knob with grey center), body tilt (knob with red center). Knobs on bouth sides. Main idea about cabin design. Share this post Link to post Share on other sites
Jurss Posted October 19, 2015 Some s/m sized supercar in progress Share this post Link to post Share on other sites
Vectormatic Posted October 19, 2015 I might have to nick that steering mechanism trick, looks good! Share this post Link to post Share on other sites
Jurss Posted October 19, 2015 There was allready this kind of steering mechanisms, but there was used small actuators, to steer. I wanted it to make more traditional. With some 10th steup, i came to this solution. It would be good, to make it lower, but i didn't figured it out until now. Share this post Link to post Share on other sites
Alasdair Ryan Posted October 20, 2015 (edited) I think you should consider changing the topic title to Jurss's colourful creations. I like the log skidder with the exception of the way you mounted the xl motor. Edited October 20, 2015 by Alasdair Ryan Share this post Link to post Share on other sites
flyboy01 Posted February 26, 2016 nice ummmm, thingy. I dunno. Share this post Link to post Share on other sites
Jurss Posted April 19, 2016 Did something bad to shock absorbers. But necessary for this scale. Share this post Link to post Share on other sites
kb7 Posted April 21, 2016 (edited) Keeping the center piece of the shock and using it alone is a genius idea! And more pics would be nice. I've always wanted to build a mining truck. Edited April 21, 2016 by kb7 Share this post Link to post Share on other sites