Jim

[TC5] Technic C-Model Contest - Entry Topic

Recommended Posts

15371659988_514fcc9021_b.jpg

C-MODEL CONTEST ENTRY TOPIC

This is the entry topic for the Technic C-Model Contest.

DESCRIPTION

Build an alternate LEGO Model out of one or two existing LEGO Technic sets. The total part count for the set(s) you use can't exceed 600, so you can either use a single set containing 600 parts or less or use two (different) sets with a combined part count of 600 or less. You can't use 600 parts of a 1200 part set. Since 2005 is the year I came out of my dark ages, I am also imposing a release date limit. The set(s) need to be released in the year 2005 or later.

DEADLINE

Deadline date is November 30th, 2014. Contest will be closed on Monday the 1st, so you will have the entire Sunday to build.

CONTEST INFORMATION

More information about the contest can be found in the general discussion topic.

WHAT DO I NEED TO ENTER?

Please take a careful look at the rules before posting in this topic. Each participant is obliged to create a post in this entry topic. Posts need to follow the rules stated below. Posts not following the rules will be disqualified so please read them carefully.

ENTRY POST

The entry post should contain:

  • Name of your model
  • Picture(s) of the original model(s)
  • Short summary of the functions/features
  • One or more (max 5) pictures of your model
  • Link to your [TC5] topic
  • Optional picture of leftover parts
  • Optional video of your model

IMPORTANT

This topic should be used for entries only, so commenting is prohibited. Please use the general discussion topic for comments on the entries.

Share this post


Link to post
Share on other sites

1. Mars Rover

Hello everyone!

This is my TC5 contest entry. It is a planetary exploration rover (something like the NASA Curiosity Rover). It is built from set 8264 Hauler.

original_set.jpg

This set was released in 2009 and counts 574 parts, including a Power Functions M motor, and a linear actuator.

Model name: Mars Rover

Features:

- articulated rocker-boogie system like in the real rover, for the 4 rear wheels

- arm turntable can be rotated by a crank accessible below the vehicle (hand of devil?)

- arm lifted by Power FunctionsTM-

- power switch easily accessible from a lever on the rear

- solar panel inclination controlled by a pot hidden in the chassis

- other movable parts: claws, antenna, camera

Pictures:

00main.jpg

20functions.jpg

sm1.jpgsm2.jpgsm3.jpg

Leftover parts:

99leftovers-800.jpg

Video:

Discussion thread: [TC5] Mars Rover

Share this post


Link to post
Share on other sites

2. Sidecar Motorcycle

Hello everyone,

Here is my TC5 contest entry based on parts from set 9392 and set 42001: Original thread.

9392_box_in_m.JPG42001-box.png?l.r=-344939276

Name of entry: Sidecar motorcycle 亞也虎

Features:

  1. Functioning fake engine,
  2. Functioning steering,
  3. Rear axle suspension,
  4. Turnable hood of sidecar.

Pictures:

1416139867m_DISPLAY.jpg

1416139869m_DISPLAY.jpg

1416139871m_DISPLAY.jpg

1416139872m_DISPLAY.jpg

1416139868m_DISPLAY.jpg

Leftover of 9392 and 42001:

1415399775m_DISPLAY.jpg

Share this post


Link to post
Share on other sites

3. Pull-Back & Go-Kart

Combo- 42002 673419189637.jpg?altimages=true&width=310&quality=85&maxheight=310〈=en&z=118685197-1621693834 42026 71%2B-9aEqItL._SY355_.jpg

Functions-

Pull-back and go.

Working 2 cylinder piston engine .

Adjustable height steering wheel.

Features-

Accelerator and brake pedals.

Rear brake disks.

Info-

Parts available 305.

Parts left over 54.

[TC5] WIP Thread- http://www.eurobrick...howtopic=101857

Images-

1414714833m_DISPLAY.jpg

14147148341_DISPLAY.jpg

14147148342_DISPLAY.jpg

14147148353_DISPLAY.jpg

Share this post


Link to post
Share on other sites

4. Eagle 9394-LK Helicopter

G'day everyone. This is my TC5 contest entry. It only uses the Technic set 9394 Jet Plane. The discussion thread for this.

I call it the EAGLE 9394-LK HELICOPTER

Functions:

  • Free Rotating rotor blades.
  • Removable swivel undercarriage gun.
  • Removable rocket/missile wing store pylons.
  • Retractable front main wheels.
  • Retractable handle for one handed use to lever to spin main rotor blades
  • Geared and sprung lever to spin main rotor blades.
  • Movable pilotage system.

​Original set and model.

15705728906_c9f4009366_n.jpg

15727519271_1cdd60ec09_n.jpg

My Model

15076685443_7a295945ab_z.jpg

15511228080_7b1f8d17b2_z.jpg

15076684933_d056067662_z.jpg

15510646658_b8caa51027_z.jpg

Leftover pieces.

15511227220_11cd32dc41_n.jpg

Edited by Jim

Share this post


Link to post
Share on other sites

5. Beach buggy

Alternate from set 8081

16gam9v.jpg

1hqo84.jpg

General information:

Dimensions: 31x13x16 cm

Weight: 540 grams.

Pieces: 549

Functions:

- HOG steering

- Fake v4 engine

- Full suspensions

- Working steering wheel.

aykj5s.jpg

From the top

1zpsa6f.jpg

From the back

dlg76f.jpg

Discussion thread

Leftover parts (41 pieces):

15dpgut.jpg

The video:

PDF Building Instructions available @ my website.

Share this post


Link to post
Share on other sites

6. The Dawnbreaker

This is an alternative model built from sets 9392 Quad Bike and 42026 Black Champion Racer.

used%2Bsets.jpg

Features:

- independent front axle suspension,

- dragged rear axle suspension,

- RWD by a pull-back motor,

- chain driven single cylinder fake engine,

- automatic return-to-centre steering provided by a super positive caster angle (steering is done by the steering wheel in the cab),

- manualy adjustable rear wing,

- only stickers from 42026 used.

Dawnbreaker1%2B-%2Bcenter%2Btyre%2Bsharpness.jpg

Dawnbreaker2.jpg

Dawnbreaker4.jpg

Dawnbreaker5_new.jpg

Dawnbreaker9.jpg

There are 54 pieces remaining out of 343 available (including spare parts).

You can read more about The Dawnbreaker in the discussion thread and build it using these.

Dawnbreaker6.jpg

Edited by MajklSpajkl

Share this post


Link to post
Share on other sites

8. Vintage Motorcycle

Made out of 42007 and 8048.

Functions:

Rear and front suspension.

Working piston engine.

Steering.

soov_043.pngsoov_0469.JPGsoov_048.JPG

Edited by pint14

Share this post


Link to post
Share on other sites

9. Wheeled Excavator

Discussion thread

For the [TC5] challenge I'm using 8071 Bucket truck

41whPLFMevL.jpg

And this is my model

15691039368_269128afc5_c.jpg

Functions:

  1. Working Steering via the gear on the back
  2. Front grader can be raised up or down
  3. Feet on the back side can be lowered, and raised
  4. Rotation of the upper structure via the gear on the side
  5. Boom can be raised and lowered
  6. Bucket is fully operational too

15897362006_10dbabf158_c.jpg

Here you can see that functions are controlled by yellow gears on the right side of the excavator.

The brown gear at the back controls steering.

Front grader and rear feet are controlled manually.

15877908522_c70a319fcc_c.jpg

And the spare part photo - 55 parts left

15561916200_184c370091_c.jpg

Video of functions can be found here (Older version of my model is seen in the video + sorry for the low quality)

https://drive.google...w?usp=sharing��

Edited by TGBDZ

Share this post


Link to post
Share on other sites

10. Irish Rover

ir_800.png007_cc_off_jack.png002_cc_side.png004_cc_rear34.png

007_leftover.png

Features

  • Independent suspension on 4 wheels
  • All-wheel steering
  • HOG steering
  • Opening doors
  • Adjustable seat
  • Motor (operated by hand) with balanced piston
  • Functional car jack

Video

[TC5] Thread

Share this post


Link to post
Share on other sites

11. Civilian Batpod

ORIGINAL SET: 8420 Street Bike

FUNCTIONS:

  • Steering (with a HUGE turning radius!).
  • Suspension in the mid-section of the bike.
  • Animated boxer-4 motor connected to rear wheel via chains.
  • Opening panels to view suspension and motor.
  • Kickstand on right side at rear.
  • Windshield, can be pivoted a little.
  • Separate stand that's sturdier than the little kickstand.

Link to the entry topic: http://www.eurobrick...howtopic=102036

15164842284_de28fcb99c_c.jpg

Lego Technic Set 8420 Street Bike

15730270230_78d4c9d70b_c.jpg

15295334454_baa7412176_c.jpg

15731565949_4e81e480ec_c.jpg

15731841187_d7669747c2_c.jpg

15891781036_818e3e46c0_c.jpg

15295333964_1f4e3bd27b_c.jpg

Edited by BigCatBoy

Share this post


Link to post
Share on other sites

12. Half-Tracked Grass Cutter

Hi everyone!

I've built my TC5 contest entry from set

42004 and set 9391

42004-1.jpg?19391-1.jpg?1

Name of entry: Half tracked grass cutter

1, Working steering

2, Rotating cutter blades while pulling the

machine forward or backward

3, Adjustable cutting blades angle

4, Working windlass

5, Although it's not a function, but the machine

has a set of spare wheels

grass cutter discussion topic

pictures:

2.jpg

1.jpg

Share this post


Link to post
Share on other sites

15. Snow Groomer

Snow groomer

Trailer.png

made with the 8047 "Compact Excavator" from 2009:

8047-0000-xx-23-1.jpg

There are three functions:

  1. Lift of blade (left exhaust pipe, worm gear, 24t crown, lift arms)
  2. Lift of tiller (right exhaust pipe, worm gear, 8t, lift arm)
  3. Working tiller, driven by the caterpillars (12t-12t, 2 times).

In addition, the blade is manually steerable (pin with friction).

Some more views to see the mechanisms:

DSC03015-asp-small.jpgDSC03014-asp-small.jpg

For a bit more details, see the discussion topic!

Share this post


Link to post
Share on other sites

BrumBrum Removed

Edited by 326
Removed some images (max 5)

Share this post


Link to post
Share on other sites

17. Daydream

Hello everyone,

my C-model for the contest was made out of a Quad Bike (9392) and a Black Champion Racer (42026) parts.

15181938894_1f73d68c46_c.jpg

I called it "Daydream"

15200496774_e8b1396c72_c.jpg

Functions:

- Suspension: Independent front, dragged rear axle

- Steering: Working steering wheel

- Pull back motor (RWD) with a locking mechanism

- Openable scissor doors

- Extendable/retractable front part of the car

- Adjustable rear wings

15822043932_bb62d682f4_c.jpg

15635637930_44701ba7f2_c.jpg

15635062898_01270d81ce_c.jpg

15200508804_81c4b4c678_c.jpg

Dimensions: Length: 22-24cm/ Width: 15cm/ Height: 9cm.

329 pieces used out of 343 (spare parts included).

Weight: 332g.

14 leftover parts:

15628933028_bea3bbb28d_c.jpg

Functions are presented in the video:

Please note that the video was made before final changes to the model, more details can be found in the discussion thread: http://www.eurobrick...howtopic=102480

Share this post


Link to post
Share on other sites

18. Dune Buggy

My entry for the TC5 contest is a dune buggy. Looking at it again, it does look like it might actually fit in better to a toy story theme, with a pair of goggly eyes. Discussion thread is here: http://www.eurobrick...howtopic=102683

It is built from 42021 and 42022 for a combined total of exactly 600 parts.

screen-shot-2013-12-21-at-17-22-36.png

Features

  • Transversely mounted V6 engine
  • Front and rear suspension
  • HoG and steering wheel steering

Pictures

15689393327_c03d3dc068.jpgIMG_2156 by veryrusty82, on Flickr

15873173761_9b6ff3edf6.jpgIMG_2154 by veryrusty82, on Flickr

15849354856_1bd00f60e4.jpgIMG_2152 by veryrusty82, on Flickr

15687659988_af131324e9.jpgIMG_2151 by veryrusty82, on Flickr

15687843860_3af887d734.jpgIMG_2153 by veryrusty82, on Flickr

Leftover bits

Far too many

15823047476_f869384628_n.jpgTc5 contest by veryrusty82, on Flickr

Share this post


Link to post
Share on other sites

20. Log Loader

Here's my entry for the contest, built using parts only from 8049. You can find the original entry thread here.

8049-1.jpg

Features:

  • Pneumatically lifted two-stage claw crane
  • Worm screw operate claw
  • Crane can be rotated via the light on the cabin roof
  • Two-stage steering, with both articulated and rack-and-pinion steering - by turning the exhaust stack, the rear body articulates, while at the same time the rack-and-pinion on the central axle also turns, resulting in 3 different angles on each axle
  • Pendular suspension on the rear axle

Photos:

15679866158_79ff0bbdf0_c.jpg

Here you can see the mutli-angle steering:

15681371979_b70eeea42b_c.jpg

The rear axle suspension:

15866741442_2e2494d2fc_c.jpg

And a few more shots:

15866784222_8b6692de96_c.jpg

15866757252_f290c71167_c.jpg

More photos can be found here :sweet:

Share this post


Link to post
Share on other sites

21. The Rare Red Grader

Here is my entry for the [TC5] competition (based on the 8261 and 8048):

8048-1.jpg?2+ 8261-1.jpg=

The rare red grader

15260390734_3d765932ba_c.jpg

It features:

- Steering : HoG + steering in the cab

- Pendular suspension on the front axle

- Pendular suspension on the rear axle

- Grader blade with the following articulation possibilities:

- up/down (operated by pushing the rod forward or backward. It has a spring loaded knee-jack mechanism to keep it either up or down)

- tilt around the vertical axis (operated by turning the wheel on the rod)

- tilt around the horizontal axis (to make it follow the ground. Not a real life feature, but great for playability)

- Ripper at the back (also with a spring loaded knee jack mechanism to keep it either up or down)

- 2 cilinder fake engine driven by one of the wheels (not enough gears in the set to connect all wheels, but it is an easy mod :wink: )

And a picture from the leftover parts:

15263013033_caf99e3e61_c.jpg

More pictures from the functions:

The ripper in the two positions:

15712667929_1a2084a1a9_c.jpg

The blade in the up/down position:

15898057392_f580174db6_c.jpg

And finally the blade as seen from the top in the extreme positions + the middle:

15898057742_c5cb8e864c_c.jpg

And finally here is the link to the discussion topic:

http://www.eurobrick...howtopic=101556

Share this post


Link to post
Share on other sites

22. Pickup Truck with Dump Cargo Bed

Hello everyone,

this is my TC5 contest entry. It's a pickup truck with dump cargo bed. It is an alternative model for 9393 set.

9393_alt4.jpg

Model name: Pickup truck with dump cargo bed

Features:

  • HOG + steering wheel (working simultaneously)
  • opening doors (simple "lock" - half of the axle 4 fits in the door case - a small force has to be applied)
  • opening hood (simple "lock" - beam 2x4 is locked by cross block 1x3 - a small force has to be applied)
  • opening cargo bed
  • soft chassis to simulate independent suspension
  • 2nd HOG for dumping cargo bed and/or rotating axle for attachable accessories (disable dumping by shifting gear 8 aside from the worm gear)
  • large attachable winch
  • special "parking feature" for overcrowded cities :-)

Images:

HOG + steering wheel, doors, hood and cargo bed opening

title_2.jpg

Soft chassis

title_1.jpg

Dumping cargo bed

title_3.jpg

Attachable accessories

title_4.jpg

And finally - smart parking :-)

title_6.jpg

Link to the topic: [TC5] Pickup truck - 9393 alternative

Leftover parts:

title_5.jpg

pet

Share this post


Link to post
Share on other sites

23. Orange Buggy

Alternative model built from sets 9392 Quad Bike and 42007 Moto Cross Bike.

296 parts, 300 grams, 32.5 studs long, 18.5 studs wide, 16 studs high.

Features:

  • independent front suspension
  • live axle rear suspension
  • RWD with fake V2 engine
  • positive caster angle that helps steering return to center
  • steering wheel
  • openable bonnet
  • fake gear and handbrake levels
  • tall rear to make up for no rolling cage

d700_14734_s2.jpg

d700_14742_s2.jpg

More photos and details in the discussion thread.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Recently Browsing   0 members

    No registered users viewing this page.