__________________________ Posted May 24, 2014 Posted May 24, 2014 https://www.dropbox.com/s/baejuhhl1oyx5xp/Suspension%20Mk%203.lxf?m= Let me know what you think! I want to model real-life suspension systems. Today's military models have disappointingly minimal ground clearance. This uses portal axles, just like the Unimog! This will be used on an APC, military light truck, etc. I wanted to cut the "connector pegs with cross axles" to reduce width (I will IRL), but LDD won't let me, obviously . I've tried to post on Flickr, but I've found the EB community is (by design of the forums) more welcoming and more active. Have a good day! Quote
mechamike Posted May 24, 2014 Posted May 24, 2014 Im on a tablet right now, but I transfered the lfx file to my dropbox to check it out later.( It would have been nice if you had added some screenshots ) Im also experimenting with a suspension system for a APC at the moment so im curious of what you have come up with. But im a but of a purist so any cutting is no no for me... Quote
__________________________ Posted May 24, 2014 Author Posted May 24, 2014 Im on a tablet right now, but I transfered the lfx file to my dropbox to check it out later.( It would have been nice if you had added some screenshots ) Im also experimenting with a suspension system for a APC at the moment so im curious of what you have come up with. But im a but of a purist so any cutting is no no for me... I'd like a way to take care of it purist. If possible. Quote
That_LEGO_Guy Posted May 25, 2014 Posted May 25, 2014 Cutting pieces NOOOO!!!! I have a solution on what I used on my minifig unimog the axle is a 6 unit long piece and the wheels stay on quite well and as a bonus the hubs(the half bush) don't rotate with the wheels giving a similar effect to spinner hub caps. the tires are These but will work with tires that fit on these or these Image of axle: https://www.flickr.com/photos/92450343@N07/13298542283/ Quote
__________________________ Posted May 25, 2014 Author Posted May 25, 2014 Cool! Could I please have that suspension LXF? I'd like to play around with supersizing it for Cutting pieces NOOOO!!!! I have a solution on what I used on my minifig unimog the axle is a 6 unit long piece and the wheels stay on quite well and as a bonus the hubs(the half bush) don't rotate with the wheels giving a similar effect to spinner hub caps. the tires are These but will work with tires that fit on these or these Image of axle: https://www.flickr.c...07/13298542283/ Cool! Could I please have the LXF? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.