DrJB Posted April 3, 2014 Posted April 3, 2014 (edited) I hope it's ok to ask. I'm looking for PDF manuals for the old Dacta Sets (no longer in production), primarily those that run with InterfaceB/RoboLab, such as Control Lab Center, Intelligent House, Amusement Park, ... Anyone got leads on where to get them? I scoured most of the 'instructions' web sites but found very little/incomplete scans. Edited April 3, 2014 by DrJB Quote
Phoxtane Posted April 3, 2014 Posted April 3, 2014 (edited) I think I may have one of those manuals lying around somewhere. If I do have it I'll see about making some time to scan it for you. You're talking about the manuals that tell you how to work in LOGO? Edited April 3, 2014 by Phoxtane Quote
jesse66058 Posted April 3, 2014 Posted April 3, 2014 I have seen tons of loads of papers and building instructions of many Dacta Sets including Interface A and B in my school. Scanning all those paper will cost some time. Maybe in the future i'll try it to digitalize. @ Phoxtane If you have the manuals of LOGO, does that mean you have the diskette with LOGO's on it!? I'm seeking for one to make for a long time in history making many Interface's A working in the original way. :) Quote
zux Posted April 3, 2014 Posted April 3, 2014 There used to be some old scans of building instructions on www.brickfactory.info, but for unknown reason it is not loading at the moment. Quote
Phoxtane Posted April 3, 2014 Posted April 3, 2014 Unfortunately I only have the one manual. I never got any diskettes with it. Quote
DrJB Posted April 4, 2014 Author Posted April 4, 2014 (edited) Would really appreciate some scans guys. Only thing I found so far is: http://www.y-y.co.il...ls/51-09795.pdf If such PDF is available, others should be. Though not sure if TLG releases them in PDF, unless that was somehow leaked. Incidentally, an 'entrepreneur' printed the pdf, and is selling it on eBay ... I have seen tons of loads of papers and building instructions of many Dacta Sets including Interface A and B in my school. Scanning all those paper will cost some time. Maybe in the future i'll try it to digitalize. @ Phoxtane If you have the manuals of LOGO, does that mean you have the diskette with LOGO's on it!? I'm seeking for one to make for a long time in history making many Interface's A working in the original way. :) Hey Jesse66058 I managed to get Interface B to work ... with Robolab 2.9, on Windows 7/64, without a glitch! Thanks again for all the help. It appears 2.9 is more 'robust/friendly' than 2.5.4 ... Edited April 5, 2014 by DrJB Quote
legolijntje Posted April 4, 2014 Posted April 4, 2014 Would really appreciate some scans guys. Only thing I found so far is: http://www.y-y.co.il...ls/51-09795.pdf If such PDF is available, others should be. Though not sure if TLG releases them in PDF, unless that was somehow leaked. [...] :laugh: On that same site, using some Google command (I don't know how it's called) searching, I also found this one, this one and this one. But I don't think they are very useful for you Quote
DrJB Posted April 4, 2014 Author Posted April 4, 2014 (edited) hahaha ... all I know is that such language is read right to left .... Here is what Google Translate says: Planning Guide Son operates a car wash with two differing § § sensors and contains a number of safety measures. Remember: • Build and program the sweetness © flushing approximately ¤ § cars sizes shall comply with § § difference. • Build Components § cleaning all parts of the car. • Define the time duration ¤ © needed from the beginning to the classification from §. • Build safeguards within the system to protect ¤ © § ravages car. • use two sensors § § various car wash operation. • Keep your plan and then change it as § ¤ enable the passage of cars various lengths § I wonder what sweetness © flushing really mean ... a candy in a big 'bathroom' ? Edited April 4, 2014 by DrJB Quote
Phoxtane Posted April 5, 2014 Posted April 5, 2014 (edited) Alright, so I got the booklet scanned just now! Here's what the front looks like. I'll be bundling this up into a PDF so it's more shareable And bundled it I have! This link may go dead in the future, so please contact me if you're reading this later on and you can't get at the file: https://dl.dropboxusercontent.com/u/84375076/LEGO%20Dacta%20-%20Teaching%20the%20Turtle.pdf Edited April 5, 2014 by Phoxtane Quote
kateoz Posted December 1, 2016 Posted December 1, 2016 On 04/04/2014 at 11:04 PM, Phoxtane said: Alright, so I got the booklet scanned just now! Here's what the front looks like. I'll be bundling this up into a PDF so it's more shareable And bundled it I have! This link may go dead in the future, so please contact me if you're reading this later on and you can't get at the file: https://dl.dropboxusercontent.com/u/84375076/LEGO%20Dacta%20-%20Teaching%20the%20Turtle.pdf Hi, im from Brazil and I just got off the dark age. I tried this link but as you warned it's dead, but, i like to get this instrutions if you could share a live link. Thank you for your atention. Quote
Phoxtane Posted December 1, 2016 Posted December 1, 2016 1 hour ago, kateoz said: Hi, im from Brazil and I just got off the dark age. I tried this link but as you warned it's dead, but, i like to get this instrutions if you could share a live link. Thank you for your atention. Try this: https://dl.dropboxusercontent.com/u/84375076/LEGO Dacta - Teaching the Turtle.pdf Quote
kateoz Posted December 1, 2016 Posted December 1, 2016 9 hours ago, Phoxtane said: Try this: https://dl.dropboxusercontent.com/u/84375076/LEGO Dacta - Teaching the Turtle.pdf Wow, you made it. Thank you, I'll try to build that. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.