Hrafn Posted January 30, 2014 Posted January 30, 2014 It holds the ball joint. This is awesome. Need to get hold of some of those! They should be useful for building complex angles into models, but unfortunately are unlikely to be useful for Technic suspensions - the joint has a lot of friction in it. These are the new hinges introduced with the LEGO Mixels. They also appear in the Chima Legend Beasts, especially 70123 and 70127. Quote
darsedz Posted January 30, 2014 Posted January 30, 2014 front and end of container are use it...commonly - 22 joints? Quote
freakwave Posted January 30, 2014 Posted January 30, 2014 It holds the ball joint. This is awesome. Need to get hold of some of those! This is the assortment that comes with the Chima Lion (70123) 70123_04_NewJoints by 1wave, on Flickr Quote
jodawill Posted January 30, 2014 Posted January 30, 2014 (edited) What is that set supposed to be? Edit: I should have reloaded the page before I replied. Now I see the answer. I seriously thought it was a Technic set. It looks awesome! Edited January 30, 2014 by jodawill Quote
nicjasno Posted January 30, 2014 Posted January 30, 2014 Very nice. Definelty need to get some. I can see many uses for those. Quote
jrathfon Posted February 14, 2014 Posted February 14, 2014 Just opened my "Piece of Resistance" (30280) free polybag and noticed an odd piece: There is not a part inventory yet for set 30280, but the new piece is #15444 and is in at least 4 sets (the 3 listed, plus the polybag). It's interesting as a stud fits in the upper level hole, it's at a different level than a headlight brick would have the same back hole. It could be used for light standards, architectural elements, railroad crossing signage, as well as fences, etc. Just thought I'd share! Quote
ElCrab Posted February 14, 2014 Posted February 14, 2014 I don't know if it really qualifies as a spoiler alert, but... That's the Piece of Resistance. Quote
Moebius118 Posted February 14, 2014 Posted February 14, 2014 I don't know if it really qualifies as a spoiler alert, but... That's the Piece of Resistance. WHAT NOOOOOOOO! Movie RUINED!!! Just kidding I saw it already hahaha. Quote
jrathfon Posted February 14, 2014 Posted February 14, 2014 Yeah, haven't watched the movie, and it is in fact the "piece of resistance", but it's cool in it's own right as a new element, will likely allow for some new interesting SNOT. I searched a little and couldn't find a mention of it, but if another "piece of resistance" thread exists, please merge it. Quote
Faefrost Posted February 14, 2014 Posted February 14, 2014 It will be interesting to see some of the uses that people will come up with for that piece. It can be effectively used as an opposite or negative version of the classic 1x1 with stud on 1 side. So it will allow for some interesting geometries. But it is still kind of oddly positioned for much common use. Quote
ResIpsaLoquitur Posted February 14, 2014 Posted February 14, 2014 What I wish is that the stud for Emmet's back had been at the bottom of the brick, not the top. In the film, when Emmet is trying to put the POR back where it belongs, it's facing in the other direction on his back. To make it accurate, the stud has to be down and the female stud-connector should be up. However, trying to put it on the figure that way is impossible, because Emmet's hair and head are in the way. Groan. Quote
Dufresne Posted February 14, 2014 Posted February 14, 2014 (edited) What I wish is that the stud for Emmet's back had been at the bottom of the brick, not the top. In the film, when Emmet is trying to put the POR back where it belongs, it's facing in the other direction on his back. To make it accurate, the stud has to be down and the female stud-connector should be up. However, trying to put it on the figure that way is impossible, because Emmet's hair and head are in the way. Groan. That's not quite right. The stud isn't accurate no matter what side it's on. Of course, to explain why I have to go into spoilers: The Piece of Resistance in the movie doesn't have ANY stud, because it's not really a LEGO piece. It's the top to a tube of Krazy Glue. Edited February 14, 2014 by Dufresne Quote
ResIpsaLoquitur Posted February 14, 2014 Posted February 14, 2014 Well, yeah, I knew that but didn't want to quite spoil it. That does add a layer of weirdness to the movie toy sets, because several of them come with brick-built versions of real-world objects that are "real" in the film. Plus, the real version of the Kragle doesn't even look like it does in the film; the design has changed since then. I do wonder why the Krazy Glue people aren't doing an advertising tie-in to The Lego Movie. I mean, they're getting free advertising out of the movie, but still, their web page and Facebook page are doing no cross-promotion. This movie should be a moneymaker for them, but they're not touching it. Weird. Quote
Moebius118 Posted February 14, 2014 Posted February 14, 2014 Well, yeah, I knew that but didn't want to quite spoil it. That does add a layer of weirdness to the movie toy sets, because several of them come with brick-built versions of real-world objects that are "real" in the film. Plus, the real version of the Kragle doesn't even look like it does in the film; the design has changed since then. I do wonder why the Krazy Glue people aren't doing an advertising tie-in to The Lego Movie. I mean, they're getting free advertising out of the movie, but still, their web page and Facebook page are doing no cross-promotion. This movie should be a moneymaker for them, but they're not touching it. Weird. It's not exactly portrayed positively in the movie. And certainly not viewed upon positively in the Lego community. Quote
The_Skirrid Posted February 15, 2014 Posted February 15, 2014 We've had the inventory since 23/01... just sayin' Quote
ResIpsaLoquitur Posted February 15, 2014 Posted February 15, 2014 Spoiler-filled photo ahead! So here's Emmet with the PoR and an actual Krazy Glue cap. The PoR brick looks to be about 75% of the size of an actual "Kragle" cap, unless Krazy Glue comes in an even smaller package. To my knowedge, this is the smallest size that Krazy Glue comes in. It's close, but not quite accurate to life. On the other hand, this photo suggests to me that the PoR brick is accurate to the film, not to life. In real life, the brick goes from just below the bottom of Emmet's hairline to just below his waist joint. That's about how big it is in the film as well. My best guess is that in Finn's imagination, the Kragle cap is smaller than it is in real life. Looking at the film versus the minifigure though, I do wish that Emmet's back clip had come in either orange (to blend into his outfit) or transparent-clear (to give the appearance of glue). The standard bley kind of detracts from the illusion now that we know what the PoR is. Quote
The_Skirrid Posted February 15, 2014 Posted February 15, 2014 I do wish that Emmet's back clip had come in either orange (to blend into his outfit) or transparent-clear Great idea. Trans-clear would be awesome... Quote
BlueberryWaffles Posted February 16, 2014 Posted February 16, 2014 I just stuck mine on upside down with white Sticky Tac so it looks like glue. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.