Nachapon Lego Posted January 31, 2013 Posted January 31, 2013 (edited) Compressed 76537 shocks. Should work with hinge align tool now. Try them as your own risk. LXF: http://www.brickshel...6537_mod_v2.lxf 76537 mod v2 by Nachapon S., on Flickr LDD MOD shock 1 by Nachapon S., on Flickr Edited January 31, 2013 by bbqqq Quote
DLuders Posted January 31, 2013 Posted January 31, 2013 @ bbqqq: Before one downloads your LDD .lxf file and possibly "crashes" the program, could you tell us what your computer's Operating System, CPU speed, and RAM is? Did it CRASH your computer, or are you just saying that it COULD crash less-capable computers than yours? Quote
Nachapon Lego Posted January 31, 2013 Author Posted January 31, 2013 (edited) On 1/31/2013 at 1:44 PM, DLuders said: @ bbqqq: Before one downloads your LDD .lxf file and possibly "crashes" the program, could you tell us what your computer's Operating System, CPU speed, and RAM is? Did it CRASH your computer, or are you just saying that it COULD crash less-capable computers than yours? The first one crash my LDD once. (Fixed V2) Win7 x64, i7 3630QM, 8 GB RAM. This one should be stable, I will fix the first one soon. 41475 shock ABS. LXF: http://www.brickshelf.com/gallery/nachapon/deathstar/41475_mod_v2.lxf 41475 mod by Nachapon S., on Flickr Edited January 31, 2013 by bbqqq Quote
Nachapon Lego Posted January 31, 2013 Author Posted January 31, 2013 (edited) The updated V2 of first one should be the best for now. It works with hinge align tool. I will improve the second one later. done Just noticed that the original LDD of first one is not fully extended, I will make one later. Moto cross front shocks fixed: LXf:http://www.brickshel..._mod_shocks.lxf 81 moto cross with mod shocks a by Nachapon S., on Flickr Testing.. ldd 61927 mod by Nachapon S., on Flickr Edited February 1, 2013 by bbqqq Quote
Superkalle Posted April 11, 2013 Posted April 11, 2013 @Nachapon - Do you have the 61927 mods as LXF to post? Quote
hrontos Posted April 11, 2013 Posted April 11, 2013 (edited) @Superkalle: is this what you are looking for? Edited April 11, 2013 by hrontos Quote
Nachapon Lego Posted April 12, 2013 Author Posted April 12, 2013 (edited) <p> On 4/11/2013 at 10:38 AM, Superkalle said: @Nachapon - Do you have the 61927 mods as LXF to post? LXF: Eleven 61927 linear actuators with half stud in steps. (0.4 cm) http://www.brickshel...ar_actuator.lxf To edit parts or assembly sub-parts cordinate: In LDD extended mode place a 61927 linear actuator . Change two extendable sub-parts to black color. (real brick metal parts and its head) Save LXF file. Open the LXF with winrar or winzip. Extract the ???.xlfml Edit the ???.xlfml You should see text like below post Edited April 12, 2013 by bbqqq Quote
Nachapon Lego Posted April 12, 2013 Author Posted April 12, 2013 (edited) <Part refID="0" designID="62271" materials="21,0" decoration="0"> <Bone refID="0" transformation="1,0,0,0,1,0,0,0,1,-4.4000000953674316,0.40000000596046448,1.2000000476837158"> </Bone> </Part> <Part refID="1" designID="62275" materials="26"> <Bone refID="1" transformation="-1,0,0,0,1,0,0,0,-1,17.5999999046325684,1.2000000476837158,10.40000003576278687"> </Bone> </Part> <Part refID="2" designID="62273" materials="21"> <Bone refID="2" transformation="0,0,1,0,1,0,-1,0,0,-4,1.2000000476837158,0.80000007152557373"> </Bone> </Part> <Part refID="3" designID="62274" materials="26"> <Bone refID="3" transformation="-1,0,0,0,1,0,0,0,-1,17.5999999046325684,1.2000000476837158,10.40000003576278687"> Edited April 12, 2013 by bbqqq Quote
Nachapon Lego Posted April 12, 2013 Author Posted April 12, 2013 (edited) There are four designIDs mean have four sub-parts for this part assembly. materials="21" mean red color sub-parts. materials="26" mean black color sub-parts. Three long number mean part positon coordinate X,Z,-Y in centimeter unit. ie: -4.4000000953674316, 0.40000000596046448, 1.2000000476837158 So we can compress this linear actuator 1 CM by two ways. +1 to both X of red color sub-parts or... -1 to both X of black color sub-parts. Then save the .xlfml and open it in LDD to see the change. FYI: 1stud=0.8 cm, 1brick_height= 0.96 cm materials="21,0 mean multi-colors part. decoration="0" mean decoratable part. With this trick for example you can... - Change the length of all actuator parts. - Precisely move any bricks to solves most of LDD collision errors (force peak/fine tune LDD-allowed collision). - Do the same as Youtube video above. - Disassemble parts like minfig's arm/hand/leg to make special MOC. - Disassemble turn table(can remove all errors of 10189 Taj Mahal). - Correct all CMF's minifig head height. Ouch by Nachapon S., on Flickr LEGO 10189 Taj Mahal LDD ideal hinge angle by Nachapon S., on Flickr LEGO CMF skin decor test 2 by Nachapon S., on Flickr Edited April 12, 2013 by bbqqq Quote
Superkalle Posted April 12, 2013 Posted April 12, 2013 That last render with the minifigs is just so good PS: where do all the tops of the turntables go (in the Taj Mahal model)? Are they moved "to the side"? Quote
Nachapon Lego Posted April 12, 2013 Author Posted April 12, 2013 On 4/12/2013 at 4:03 PM, Superkalle said: That last render with the minifigs is just so good PS: where do all the tops of the turntables go (in the Taj Mahal model)? Are they moved "to the side"? Thanks, Superkalle. There is another trick for the last rendering that I will post later. It is a tricks to make minifig's hand to hold a plate or tile (very quick & work with all arm/hand poses). I tried to completly remove tops of the turntables but not success yet. So just put them floating high above. Then use same trick as decors built sail, edit materials="999" so they will not shown in LDD. Quote
Superkalle Posted April 12, 2013 Posted April 12, 2013 On 4/12/2013 at 4:55 PM, bbqqq said: I tried to completly remove tops of the turntables but not success yet. So just put them floating high above. Then use same trick as decors built sail, edit materials="999" so they will not shown in LDD. I can say that I have since a long time put it as a "fan request" to the LDD Team to separate the turntable top and bottom. Let's hope we get it soon Quote
Nachapon Lego Posted April 27, 2013 Author Posted April 27, 2013 (edited) Another sample of lxf edit trick. Put un used sub-parts out of the scene then render with LDD2PovRay. lxf edit trick1 by bbqqq1, on Flickr DKXlFX by bbqqq1, on Flickr Edited April 28, 2013 by bbqqq Quote
Calabar Posted April 27, 2013 Posted April 27, 2013 @bbqqq I've difficulties to load the images you are posting these days. They load very slow and often don't end to load. Do you notice the same problem? Quote
Instructions archiver Posted April 27, 2013 Posted April 27, 2013 Calabar I have same problem like you Quote
Nachapon Lego Posted April 28, 2013 Author Posted April 28, 2013 (edited) On 4/27/2013 at 7:08 PM, Calabar said: @bbqqq I've difficulties to load the images you are posting these days. They load very slow and often don't end to load. Do you notice the same problem? On 4/27/2013 at 8:19 PM, Instructions archiver said: Calabar I have same problem like you I fixed the last two. Edited April 28, 2013 by bbqqq Quote
Jason C. Hand Posted April 28, 2013 Posted April 28, 2013 bbqqq, How did you do this trick? I'm having some trouble replicating it, not sure if I understood the instructions On 4/28/2013 at 6:57 AM, Jason C. Hand said: bbqqq, How did you do this trick? I'm having some trouble replicating it, not sure if I understood the instructions Never mind, think I get it now. Quote
Nachapon Lego Posted May 4, 2013 Author Posted May 4, 2013 (edited) Finally, can do this. LEGO LDD minifig pose by lxf edit trick 2 by bbqqq1, on Flickr Edited May 4, 2013 by bbqqq Quote
Nachapon Lego Posted August 2, 2013 Author Posted August 2, 2013 (edited) LEGO Technic: Functional Elements, Mini Linear Actuator, 7-9M, 92693, 4612100 LXF (7-10M, 0.5m steps. For real do NOT use 9.5&10M ): http://www.brickshelf.com/gallery/nachapon/94UCSSSD/68_mini_la.lxf LEGO LDD Technic Functional Elements, Mini Linear Actuator, 7-9M, 92693, 4612100 by Nachapon S., on Flickr Edited August 2, 2013 by bbqqq Quote
jono rocky Posted May 28, 2016 Posted May 28, 2016 Does anyone have a Lxf. file of just a minifig hand. Ive tried editing but best I got was "part was not placed correctly and has been removed" Quote
Metalloman Posted November 20, 2016 Posted November 20, 2016 Hey guys! I'm having some trouble connecting the default assembly shock absorber, since I can't expand it in any way. Googling here and there I found this thread and then downloaded the 41475 mod, as it appeared to be the perfect one for my model in LDD. Unfortunately it doesn't connect when I try to put it between a cross/peg connector and a 2m cross on a fixed structure. I tried different measures among the ones provided but with no avail. I'll post some pics for the sake of clarity: http://imgur.com/a/8QmGb As you can see something is wrong with alignment, and I don't wnow what is causing that... on top of that, after a couple hour messing with that, while taking those snapshots, the whole parts suddenly connected:http://imgur.com/a/Weemj but of course I'm now having problems with the other side: http://imgur.com/a/XbyOx I really don't know how to fix this, so any advice is really welcome!! :D PS: sorry if I'm necrothreading but I can't post new threads yet, as I'm a new user (already posted into the new member area, waiting for the tenth post). P.P.S: @bbqqq: any news about this? That could be the answer to my troubles... :) On 1/31/2013 at 2:43 PM, bbqqq said: This is WIP. Expand Quote
GregF007 Posted April 20, 2018 Posted April 20, 2018 Great mods gents... the shock absorber adj saved the day! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.