amine Posted April 21 Posted April 21 (edited) https://archive.org/details/lego-9711-klik-kor New lego dacta disk found, does anyone have information on it ? It seem to be .clb project files for control lab. Edited April 21 by amine Quote
legoROBOLAB Posted April 21 Posted April 21 It uses md-dos Control lab software. I try to open it.. but it gives and error on my DoxBox. Quote
amine Posted April 21 Posted April 21 (edited) I already had errors when I used the wrong control lab version. On file is called robotarm.clb that one should work because it use the 9701 project. By the way we have now a new french version for the mac, with Project files !!!Thanks to Jarstx. https://archive.org/details/clmac-102-f Edited April 21 by amine Quote
legoROBOLAB Posted April 21 Posted April 21 Friends, as you know I'm the webmaster of this blog, https://legoeducacional-umcontributo.blogspot.com/ and although it's not the topic of this conversation, I've been looking for some LEGO DACTA teacher's books for a while now. If any of you know someone who has the 2009655, that is, Mechanical Engineering Activity Pack - 2009655, I would appreciate your help and understanding. Quote
amine Posted April 21 Posted April 21 (edited) 9 hours ago, legoROBOLAB said: Friends, as you know I'm the webmaster of this blog, https://legoeducacional-umcontributo.blogspot.com/ and although it's not the topic of this conversation, I've been looking for some LEGO DACTA teacher's books for a while now. If any of you know someone who has the 2009655, that is, Mechanical Engineering Activity Pack - 2009655, I would appreciate your help and understanding. We have thanks to Niels the Danish version of control lab , he has just uploaded 4 disks today. https://archive.org/details/lego-control-lab-v1.2-danish Are you also aware I already uploaded to archive the french IBM version of Lego Line with manual ? https://archive.org/details/lego-lines-ms-dos Edited April 21 by amine Quote
legoROBOLAB Posted April 22 Posted April 22 The Danish software works perfectly, including the Lego 9711 Klik & Kor V1.1 activities. You need to start with the Danish version 1.2 of Control Lab. Quote
amine Posted April 22 Posted April 22 6 hours ago, legoROBOLAB said: The Danish software works perfectly, including the Lego 9711 Klik & Kor V1.1 activities. You need to start with the Danish version 1.2 of Control Lab. We need to find or translate to English the activities. Do you know if they made other languages translations of this one ? Quote
amine Posted April 22 Posted April 22 (edited) On 4/21/2026 at 12:38 PM, legoROBOLAB said: Friends, as you know I'm the webmaster of this blog, https://legoeducacional-umcontributo.blogspot.com/ and although it's not the topic of this conversation, I've been looking for some LEGO DACTA teacher's books for a while now. If any of you know someone who has the 2009655, that is, Mechanical Engineering Activity Pack - 2009655, I would appreciate your help and understanding. I have only the set 9607 but it is going to take some time before scanning the instruction manuals. I also have the set with the bridges. Edited April 22 by amine Quote
amine Posted April 23 Posted April 23 On 4/21/2026 at 12:38 PM, legoROBOLAB said: Friends, as you know I'm the webmaster of this blog, https://legoeducacional-umcontributo.blogspot.com/ and although it's not the topic of this conversation, I've been looking for some LEGO DACTA teacher's books for a while now. If any of you know someone who has the 2009655, that is, Mechanical Engineering Activity Pack - 2009655, I would appreciate your help and understanding. Is It that manual ? Quote
legoROBOLAB Posted April 23 Posted April 23 Thank you very much, Amine, for your contribution. Indeed, the teacher's book I'm looking for is this one: Quote
legoROBOLAB Posted April 23 Posted April 23 (edited) Good morning. Indeed, the Lego 9711 Klik & Kor V1.1 activities is related to box 9701, as it contains activities for that box. It has a menu with access to a math and energy section, but the fundamental thing is indeed box 9701. Translating the program... I haven't figured out how yet..... The wheelchair menu is showing an error... Although the clb file is there. I think this error is due to the vowel Ø in the name of the file. Edited April 23 by legoROBOLAB Quote
amine Posted April 23 Posted April 23 (edited) 3 hours ago, legoROBOLAB said: Good morning. Indeed, the Lego 9711 Klik & Kor V1.1 activities is related to box 9701, as it contains activities for that box. It has a menu with access to a math and energy section, but the fundamental thing is indeed box 9701. Translating the program... I haven't figured out how yet..... The wheelchair menu is showing an error... Although the clb file is there. I think this error is due to the vowel Ø in the name of the file. I am working on the online Danish version It will be available with that link when it finishes processing. I have included the activities https://archive.org/details/ctrlab_202604 Edited April 23 by amine Quote
legoROBOLAB Posted April 23 Posted April 23 Thanks a lot for your work...allways. Mon ami, deux fichiers CLB ne s'ouvrent pas et affichent une erreur car leurs noms d'origine contiennent des voyelles nordiques. Il s'agit de KLIK&KØR.CLB et KØRESTOL.CLB. Le premier élément est le menu principal. C'est pourquoi, lorsque nous essayons d'y revenir, Control Lab affiche une erreur. Le second concerne l'activité en fauteuil roulant. Comment ai-je résolu le problème ? J'ai renommé les éléments et je les ai ouverts directement, car je ne trouvais pas d'autre solution. Quote
amine Posted April 23 Posted April 23 (edited) 54 minutes ago, legoROBOLAB said: Thanks a lot for your work...allways. Mon ami, deux fichiers CLB ne s'ouvrent pas et affichent une erreur car leurs noms d'origine contiennent des voyelles nordiques. Il s'agit de KLIK&KØR.CLB et KØRESTOL.CLB. Le premier élément est le menu principal. C'est pourquoi, lorsque nous essayons d'y revenir, Control Lab affiche une erreur. Le second concerne l'activité en fauteuil roulant. Comment ai-je résolu le problème ? J'ai renommé les éléments et je les ai ouverts directement, car je ne trouvais pas d'autre solution. Effectivement il faudrait renommer ces deux fichiers. It seems there is an incompatibility with those two files related to the danish characters. I am going to rename those files inside archive and see if it works. For the moment I can launch the files projmenu.clb and ideemenu.clb without editing. Thank you for the fix. Edited April 23 by amine Quote
amine Posted April 23 Posted April 23 (edited) 2 hours ago, legoROBOLAB said: Thanks a lot for your work...allways. Mon ami, deux fichiers CLB ne s'ouvrent pas et affichent une erreur car leurs noms d'origine contiennent des voyelles nordiques. Il s'agit de KLIK&KØR.CLB et KØRESTOL.CLB. Le premier élément est le menu principal. C'est pourquoi, lorsque nous essayons d'y revenir, Control Lab affiche une erreur. Le second concerne l'activité en fauteuil roulant. Comment ai-je résolu le problème ? J'ai renommé les éléments et je les ai ouverts directement, car je ne trouvais pas d'autre solution. I know how to fix that On the page projmenu file: Go to the left of the page and start on a white area and draw a rectangular to select the korestol picture. When it is selected you will see four dots around that mean you can edit the element. Then double click and in the target field write correct the name of the file you want to open. Drawing a rectangular from a empty area around the menu name allows you to edit that object. Change the name to the new one. It works I just tried it but I get a write protection when I want to save the modification... Save the project to a new fake name and replace it after. It is all fixed I am uploading the new version to archive. Note that we can translate the software in English by simply editing the labels and text right inside the Danish version of controllab. Edited April 23 by amine Quote
Mr Hobbles Posted April 23 Posted April 23 Hello folks, Does anyone know if anyone has uploaded a scan of the teaching materials for the DACTA Intelligent House 9707? I believe the teaching materials were set 9708. I think it came with some software on a floppy as well. Thanks! Quote
legoROBOLAB Posted April 24 Posted April 24 18 hours ago, amine said: I know how to fix that On the page projmenu file: Go to the left of the page and start on a white area and draw a rectangular to select the korestol picture. When it is selected you will see four dots around that mean you can edit the element. Then double click and in the target field write correct the name of the file you want to open. Drawing a rectangular from a empty area around the menu name allows you to edit that object. Change the name to the new one. It works I just tried it but I get a write protection when I want to save the modification... Save the project to a new fake name and replace it after. It is all fixed I am uploading the new version to archive. Note that we can translate the software in English by simply editing the labels and text right inside the Danish version of controllab. Parfait... Perfect!!!!!! I embed this on my blog too Quote
amine Posted April 24 Posted April 24 8 hours ago, legoROBOLAB said: Parfait... Perfect!!!!!! I embed this on my blog too Can you try the Mac version https://archive.org/details/clmac-101-f Thanks Quote
legoROBOLAB Posted April 24 Posted April 24 J'ai essayé aujourd'hui et ça a planté au démarrage. L'écran est resté bloqué sur l'icône de la disquette avec un point d'interrogation. Quote
amine Posted April 24 Posted April 24 (edited) 11 minutes ago, legoROBOLAB said: J'ai essayé aujourd'hui et ça a planté au démarrage. L'écran est resté bloqué sur l'icône de la disquette avec un point d'interrogation. It should be working now. https://archive.org/details/clmac-101-f The software will be in the directory dacta inside system 7. If it is still blocking try using a diferrent navigator like edge for example. I am planning to do the english version as well Edited April 24 by amine Quote
Toastie Posted April 24 Posted April 24 18 minutes ago, legoROBOLAB said: J'ai essayé aujourd'hui et ça a planté au démarrage. L'écran est resté bloqué sur l'icône de la disquette avec un point d'interrogation. Wait ... "Madame Leroc est au marché" - that's what I learned in school. And: "C'est une voiture jaune" (back in 1974) À vôtre santé All the best Thorsten Quote
amine Posted April 25 Posted April 25 (edited) 7 hours ago, Toastie said: Wait ... "Madame Leroc est au marché" - that's what I learned in school. And: "C'est une voiture jaune" (back in 1974) À vôtre santé All the best Thorsten C'est la France !! Edited April 25 by amine Quote
amine Posted April 25 Posted April 25 (edited) 1 hour ago, legoROBOLAB said: It works on Edge!!!!! Great I can do the english version as well if you want. I think next step would be a preconfigured dosbox with all the software in it.... Edited April 25 by amine Quote
amine Posted April 25 Posted April 25 (edited) 9 hours ago, amine said: I can do the english version as well if you want. I think next step would be a preconfigured dosbox with all the software in it.... I have found this code that can automatize lauch in dosbox by editing dosbox.conf [autoexec] # Lines in this section will be run at startup. keyb sf mount c c:\logo c: logowrfr # une fois LogoWriter automatiquement exécuté # taper [alt-enter] pour lemode plein écran... Would be nice if we can add mulriboot suport for dosbox. Edited April 25 by amine Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.