diggerdriver Posted January 20, 2012 Posted January 20, 2012 Hello, i just finished my Unimog with steering.Now my Unimog is done. Yesterday i startet my new Project the wheeled Loader 8265. I searched the Forum but i did not found anything about steering,driving and so on.Does anybody modivicated the Loader,so that he can drive and so on??? I need a few pics. I gues i need one xl Motor and 3 m motors.Is that right??? Xl for Driving,one m for steering,one for up and down and one for the spoon excavator???? Can anybody help???? Greetings from Germany Quote
Cwetqo Posted January 20, 2012 Posted January 20, 2012 Check this: http://technicbricks.blogspot.com/2010/01/building-instructions-for-8265.html and this: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=409679 I've done it and it works fine. Quote
diggerdriver Posted January 21, 2012 Author Posted January 21, 2012 Check this: http://technicbricks.blogspot.com/2010/01/building-instructions-for-8265.html and this: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=409679 I've done it and it works fine. Have you downloaded both instructions 4 and 5 wich one do i need only 4 or both If you have downloaded the instructions,can you mail them to me ?? THX a lot Quote
diggerdriver Posted January 21, 2012 Author Posted January 21, 2012 Hello again, i just downloaded both instructions. Wich of them did you build 4 or 5 with the extra cylinder near the two m Motors??? or the first instruction number 4. Does the steering of the Loader work good ???? THX a lot Quote
imajor Posted January 21, 2012 Posted January 21, 2012 You can check this too: Pictures: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=395957 I tried it, and it works great. Quote
Dafgek81 Posted January 22, 2012 Posted January 22, 2012 Hallo, I've build it to, but de drivemotor gear keeps slipping over the gear of the differential. I've put in a guidewheel from 8275 to push it harder on to the differential gear, but it keeps slipping. Does anyone know how to stop this from happening. Greetings from Christian Quote
timslegos Posted January 22, 2012 Posted January 22, 2012 Hallo, I've build it to, but de drivemotor gear keeps slipping over the gear of the differential. I've put in a guidewheel from 8275 to push it harder on to the differential gear, but it keeps slipping. Does anyone know how to stop this from happening. Greetings from Christian The best way to prevent gear slipping is further gear reduction. Maybe you can add a 8t gear to the motor and a 24t gear to the axle that goes to the differential. tim Quote
Dafgek81 Posted January 23, 2012 Posted January 23, 2012 (edited) The best way to prevent gear slipping is further gear reduction. Maybe you can add a 8t gear to the motor and a 24t gear to the axle that goes to the differential. tim Hallo Tim, The solution you give won't work, there is a 19t gear on the bottom of the XL motor and that goes directly on fo the differential. I've looked at it and I don't see a way to make a gear reduction in the little space there is. At least not if you build it with the instructies on brickshelf that are mentioned above. Christian Edited November 3, 2012 by Dafgek81 Quote
Cwetqo Posted January 23, 2012 Posted January 23, 2012 Have you downloaded both instructions 4 and 5 wich one do i need only 4 or both If you have downloaded the instructions,can you mail them to me ?? THX a lot Instruction no. 4 is for version without LA and is not working ok. I recommend version no. 5, which works fine, only problem is too direct transmission from motor to wheels. I solved it by using variable remote, which enables motor to start slowly, but I plan to rework back part to insert higher gear ration transmission. Quote
technicfan Posted January 26, 2012 Posted January 26, 2012 (edited) If you build version #5 can you use a variable remote on it instead of the 2 little remotes joined together?. Does it do all the same functions as the 2 little ones?. Edited January 26, 2012 by technicfan Quote
Alasdair Ryan Posted February 1, 2013 Posted February 1, 2013 (edited) And here is mine....fully motorized with added beacon. Edited February 1, 2013 by Alasdair Ryan Quote
davidmull Posted February 1, 2013 Posted February 1, 2013 And here is mine....fully motorized with added beacon. Does your beacon flash? I remember them years ago in police sets :) can they be got in black? Quote
Alasdair Ryan Posted February 1, 2013 Posted February 1, 2013 (edited) Yeb. Only these can be bought in black but they do flash. Edited February 1, 2013 by Alasdair Ryan Quote
trekman Posted February 2, 2013 Posted February 2, 2013 Hallo, I've build it to, but de drivemotor gear keeps slipping over the gear of the differential. I've put in a guidewheel from 8275 to push it harder on to the differential gear, but it keeps slipping. Does anyone know how to stop this from happening. Greetings from Christian I built this model even before the manual version. To my dissappointment I discovered that I needed more gear reduction. The XL motor will skip on forward/reverse work. It is too fast for its intended purpose. I ended up having to rework the whole back end to get it working to my satisfaction. So be warned! Quote
Alasdair Ryan Posted February 2, 2013 Posted February 2, 2013 I built this model even before the manual version. To my dissappointment I discovered that I needed more gear reduction. The XL motor will skip on forward/reverse work. It is too fast for its intended purpose. I ended up having to rework the whole back end to get it working to my satisfaction. So be warned! Yeb it drives way to fast,I am also having problems with the steering (backlash and a lack of movement) It is defiantly not a tip-top mod but It did give me something to do for 4 hours. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.