Jump to content

Recommended Posts

Posted (edited)

Hey, might be a good time to show another MOC that i've made. (Thanks to a friend that made the pictures)

I made this train station for a local LUG show.

It's a mix of many train stations around the world (mainly European ones and some might recognize the similarities with Gare du Nord train station in Paris). The roof is similar to the Berlin station etc...

The dimensions of the main building are 48 x 51 studs (so a little bigger then the large LBG baseplate). I couldn't fit it exactly into 48 studs width because of the roof configuration.

The waiting platforms are 64 studs long (3 of them) and fit 3 train tracks. The roof over them is made out of technic parts to simulate some real-life girders. It's covered in 8x8 trans blue plates (ordered in 7 segments, 8 pcs long).

The insides of the main building are in 3 levels:

- ground floor (front half of the building, featuring a shop, ticket & info counter and a hallway with some stairs onto the waiting platforms.

- waiting platforms (about 3 bricks off the ground) have some vending machines, train timetables and some benches. From here, minifigs can use the escalators to get to the balcony.

- the balcony has some more benches, a restaurant and a nice overview of incoming and outgoing trains.

I used SNOT extensively to make interesting walls, especially on the front side of the station. The side walls of the platforms are mostly SNOTted too.

Some info:

~ 6 kg

~ 7500+ parts

~ 800 DBG 2x2 tiles

~ 300 black cheese slopes

~ 100 trans panels 1x2x1

- 56 trans-blue 8x8 plates

...

Here's some pictures:

Front side of the main building:

postaja005.jpg

Waiting platforms, roof configuration, balcony, vending machines...

postaja002.jpg

postaja003.jpg

Side view (full length is 112 studs ~ 90 cm)

postaja004.jpg

Since the train station is pretty much covered and it was pretty hard to get decent pictures of the insides without breaking it apart, i included some LDD generated pictures of some things that might be interesting.

Waiting platforms:

lddscreenshot10.png

Elevators:

lddscreenshot11.png

Link to the LDD file (without interior and baseplates... i used this file to get the parts with LDD Manager - tnx to Superkalle).

http://www.brickshelf.com/gallery/bpavsic/MyMOCs/TrainStation/design_-_ts2_parts.lxf

Edited by Bojan Pavsic
Posted

Really nice :thumbup:. The roof is very impressive, although its a shame about the studs, it would have looked better with a flat surface :sceptic:.

The facade looks very fancy with lots of details :wub:. Now the inside is just fantastic, i just wish we could see more of :blush:.

Great work :wink:.

Thanks, CB

Posted

@crabboy329

Well, since it got damaged during transport back home, i need to fix it. I'll try to take it apart a bit more and take pictures of the insides, but it's no promise :)

The problem with the roof studs is that there aren't any big tiles in trans colors (8x16, 6x6,...). Even big trans plates are pretty rare.

Posted

First up - really nice model. Reminds me a lot of Zurich Hauptbahnhoff.

Second the struts on the roof look to be in tension - how were they made as the technique looks good.

Posted (edited)

I included a link to (partly incomplete) LDD file of this (in the original post), that i used for the design. You can check how the roof construction is made.

The problem with the roof is that the pillars have to be sturdy enough. If the stretch out, the roof straightens as the axles are pulled out of the connectors. If i'd use the technic beams 9L, it'd be really sturdy, but it wouldn't look so nice.

About the show, yea, it caught some looks, but the main problem was that hardly anyone saw, that there's stuff inside of it. So i'm looking into some lighting of the interior or something, just to make it a bit more visible.

Edited by Bojan Pavsic
Posted

About the show, yea, it caught some looks, but the main problem was that hardly anyone saw, that there's stuff inside of it. So i'm looking into some lighting of the interior or something, just to make it a bit more visible.

Some ideas:

A large well positioned mirror to help people look up, into, the station from a low eye perspective...

A small webcam linked to a video monitor which puts you at the eye perspective of the mini-figs?

A roof which can (randomly? Motor) open up like a clam shell so people get a chance to see inside, and appreciate the building. (ok not possible if the roof struts are too important).

A second version of the station minus the roof (lots of bricks and space = :thumbdown:, but chance to appreciate the build :thumbup:

Posted

Thanks again for all the replies.

I still feel that it's somewhat empty. It's quite a big MOC and i'm not very good in the "final touch details". I think there should be a lot more going on in there (more minifigs, all kinds of - workers, train station employees, maybe even some conductors that went for a meal while the train is stopped, passengers of all sorts).

I might switch the DBG roof plates over the station building with the trans-blue ones, to allow a bit more light inside and to make people notice, that there's something going on under the roof too. The idea with retractable roof is sadly not an option. At least not like this. The roof construction is not sturdy enough to allow it to be "opened". It relies on the pillars on both sides which keep it together. If they would tilt ouside, the whole roof would fall into itself. The only option would be a technic beam connection from one end of the arch to the other, but that would somehow ruin the appearance.

I'm playing with the idea to make a new similar station with the option of retractable roof. We'll see... i need to finish my skyscraper hotel first :)

Posted

I agree with everybody else - it's great, and so magnificent in all its bigness :) I don't mind the studded roof, either. I can see how you would like to add some more details to finish it off properly, but the starting point sure is fabulous!

Posted

Very nice building and great use of the bley minifigure statues! Your station soo much reminds me of the Copenhagen central train station. :classic:

Posted

It's massive and cool. I love the minifig statues.

The roof build is just amazing and the inside is even better.

A lot of bricks, a lot of time, but it was certainly worth of it.

You have made an amazing job Bojan!

  • 2 weeks later...
Posted

Wow, I'd wish to be able to build a station like that sometime, especially in this classical European styling. But at the moment, that's sadly not an option...

Posted

Well, you know what they say: "Where there's a will there's a way" :)

Took me some time too... It actually started out as a pass through station, with the building at the side of the tracks... Then it evolved into a double sized project as it is now :)

Posted (edited)

Nice station with so many wonderful details! When displaying at events, are the platforms extended out of the roof? Most dead-end-stations just have the first part of the platforms covered with roof.

Edit:

P.S.: I like the cutlass as technique detail!!

Edited by Sheriff von Snottingham
Posted

No, the platforms are long only as much, as the roof is. I might extend them a bit more, sometime in the future, but right now i'm working on another building, so this one is for now staying as it is.

Posted

Well, you know what they say: "Where there's a will there's a way" :)

Took me some time too... It actually started out as a pass through station, with the building at the side of the tracks... Then it evolved into a double sized project as it is now :)

Agree with this. I have some outrageous ideas for track ballasting/landscaping around a track setup but it will take some time (and investment) so I will just chip away at it as we go. It's not like I plan on ever giving up my passion for Lego trains so I've got plenty of time to work on it slowly. :-)

Bojane, odakle si majstore? :thumbup:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...