samthelegoman1 Posted October 28, 2008 Posted October 28, 2008 I really wanted to know- would a black sharpie marker work on an Indy hat? Quote
meschepers Posted October 28, 2008 Posted October 28, 2008 Don't do it. I have done this with one of mine and it ends up looking bad. the black doesn't look black when applied to brown. It appears very dark red. Plus the tight spaces where the brim meets the crown of the hat is impossible to get to with a standard sharpie. If you want to recolor it I would suggest model paint or wait until the new Indy sets come out and get one of the black fedoras from the Chinese gangsters. Quote
samthelegoman1 Posted October 28, 2008 Author Posted October 28, 2008 Okay. Will white out work for a white hat? Quote
Dadster Posted October 28, 2008 Posted October 28, 2008 Okay. Will white out work for a white hat? Probably...I'm gonna try blood for a red one. Quote
samthelegoman1 Posted October 28, 2008 Author Posted October 28, 2008 Don't think that'll stick Quote
Pencoin Posted October 28, 2008 Posted October 28, 2008 Okay. Will white out work for a white hat? TLC made that as well... Quote
samthelegoman1 Posted October 28, 2008 Author Posted October 28, 2008 Really? I just want to know if it'll work Quote
meschepers Posted October 28, 2008 Posted October 28, 2008 I think white-out would work as it is basically a paint and is applied with a brush rather than with a felt tip. With white-out it is at least fairly easy to remove if it doesn't look good... should just flake right off. Quote
Pirate_Skillz Posted October 28, 2008 Posted October 28, 2008 Doesent work. It made a red and maroon colour on my hat. Quote
samthelegoman1 Posted October 29, 2008 Author Posted October 29, 2008 Doesent work. It made a red and maroon colour on my hat. The white out or the sharpie marker? Quote
Scouty Posted October 29, 2008 Posted October 29, 2008 TLC made that as well... They did? Where? Quote
trooperdavinfelth Posted October 30, 2008 Posted October 30, 2008 *ahem* It's called a fedora. They did? Where? It's in the big farm set with the white and black cows. Quote
Alice Posted October 30, 2008 Posted October 30, 2008 I really wanted to know- would a black sharpie marker work on an Indy hat? Okay. Will white out work for a white hat? I think we've established that the sharpie won't work. PLEASE don't do these things to your lego. I can only imagine what a white-out hat would look like and it doesn't look good. When I was 10, I painted my nails with white-out while sitting in class (yeah I know, I probably inhaled the fumes too.. it explains some things). The point is, it looked awful because it was all uneven and flaky (besides the fact that white fingernails aren't pretty). If you must modify your lego, invest in some actual paint that is made for plastic so that it will look decent and evenly painted. Quote
Dark Sword Ragnarok Posted October 30, 2008 Posted October 30, 2008 I think we've established that the sharpie won't work. PLEASE don't do these things to your lego. I can only imagine what a white-out hat would look like and it doesn't look good. When I was 10, I painted my nails with white-out while sitting in class (yeah I know, I probably inhaled the fumes too.. it explains some things). The point is, it looked awful because it was all uneven and flaky (besides the fact that white fingernails aren't pretty). If you must modify your lego, invest in some actual paint that is made for plastic so that it will look decent and evenly painted. Yeah, take it from me, if you want a real black color on a darker color piece (like brown) DO NOT use sharpie. I've made that mistake. Only use sharpie for white element and such. And don't do it to the entire thing. With sharpie, it's only good for detailing. Look at my clones, they all have sharpie detailing. But that's it, detail. I also wouldn't use white-out, just beause it flakes way too easy. You'd be repainting it all the time. DSR Quote
trooperdavinfelth Posted October 30, 2008 Posted October 30, 2008 If I wanted to paint one of my many fedoras(and who doesen't have tons since he's in every set? ) I'd use real paint; my dad paints 1/6 scale WW2, WW1, and Modern stuff, in addition to collecting them, and he could easily paint one black or white. But sharpie is best on a torso, in my opinion, and only really for clones. If you want, just go out to the paint section of your average Wal-Mart and find the section with the small paint can/bottle/things. Now just find the color and see if there are any instructions; usually you need a primer, but if you can find a nice paint that doesen't need a primer and doesen't bubble or jumble up then get it. Once home just use a smallish brush and apply smoothly. ALWAYS smooth out creases and bumps in this way. Quote
Eilif Posted October 30, 2008 Posted October 30, 2008 (edited) If you want to color abs plastic, paint is the way to go. Glossy or soft plastic is hard to paint to. However, there are several paints that are made to adhere to plastic. Krylon fusion is one of them. I've used krylon to paint soft plastic (the kind that army men are made of) which is one of the most dificult plastics to paint, and it sticks very well. It also makes a good base for painting other colors over, though with small LEGO parts too many paint layers could obscure detail. Alternatively, if you use regular model paint, I would recomend a non-acrylic enamel. Also, lightly roughing (deglossing) the surface with steel wool will make the paint adhere better. Sharpies don't color properly, and white out is not at all suitable. Vinyl dye is supposed to be a great option also, but I don't know much about it. A search of some of the minifig customizing forums (EB, minifig customization network, Brickforge, etc) will reveal more info on that. Edited October 30, 2008 by Eilif Quote
Morgan19 Posted October 30, 2008 Posted October 30, 2008 Krylon Fusion spraypaint all the way. I've used it countless times, mostly to make things black, and have been happy with the results nearly 100% of the time. m19 Quote
simonjedi Posted October 30, 2008 Posted October 30, 2008 Krylon Fusion spraypaint all the way. I've used it countless times, mostly to make things black, and have been happy with the results nearly 100% of the time.m19 This ^ A can of spray will be perfect for what you need, make sure you spray it in small bursts and shake the can well before use. Quote
Scouty Posted November 3, 2008 Posted November 3, 2008 It's in the big farm set with the white and black cows. Hmmm, oh! How interesting! That's cool, I never noticed it before. It doesn't look like a fedora, though, but I don't know, could just be the angle. Quote
cartoondude Posted November 3, 2008 Posted November 3, 2008 I colored an Indy fedora with black sharpie and it worked awesomely. But after a while you might have to re-color it. Quote
randomparrot Posted November 3, 2008 Posted November 3, 2008 I used sharpie on Mutt's torso and it worked ok but it rubbed off easily. Quote
Dr. X Posted November 3, 2008 Posted November 3, 2008 Man... I seriously regret sharpie-ing all my classic-space and C-3PO torsos when I was little. NEVER SHARPIE! It will only destroy your parts. Quote
Tanotrooper Posted November 3, 2008 Posted November 3, 2008 Fedora in farm set is TAN not white. Just wait and buy it in the new indy set in a few months ;-) TT Quote
Eilif Posted November 4, 2008 Posted November 4, 2008 This ^A can of spray will be perfect for what you need, make sure you spray it in small bursts and shake the can well before use. Definately, but make sure that you spray across the model. When you first press down the spray, you should not be pointed at the model. This will reduce the possiblility of getting splashes or runs. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.