transmission for truck help!!!!!

[platinum831]

so far i have a frame and axles for a truck i am building i would like to put a transmission in this truck with both front and rear drive and also dual pto one to front and one to rear as i will be running a winch in front and just a normal pto out put in the rear there are some measurements on the screen of what i have now it can be widened i just don't know how to build transmissions and would like some help

[JintaiZ]

I'm not an expert at building them, but you could browse instructions online and get some ideas

[MinusAndy]

Off the top of my head you could drive your power take offs using a gear selector ring and two red gears but input through the centre shaft and output from the red cog on either end of it. The shaft would be constantly rotating and then you could engage either red cog and take the outputs from those.

https://images.app.goo.gl/hXManm3rYY9nQUTm8

Edited September 26, 2020 by MinusAndy

[platinum831]

so i got the basis of what i wanted to build i still need to add in a locking center diff and figure out how to add another speed gear ration on