Jump to content

Recommended Posts

Posted

Hello everyone, this is the entry I'm working on for the small car contest.  It started with an idea for a narrow steered and driven axle, around which I'm developing a small monster truck-style model.

Features planned at the moment include:

  • AWD
  • Four wheel steer
  • Suspension
  • Oversize V8 fake engine

small%20car%20WIP1.jpg

small%20car%20WIP2.jpg

My first design for the suspension didn't work, as the springs (removed in above picture) in the extended position stressed the CV joints too much.  The wheelbase was also too long for the form factor I wanted, so I definitely need to redo the suspension.

small%20car%20WIP3.jpg

The tires are 20x30, part number 6581 which according to Bricklink have an outer diameter of 49.6 mm so they fit for the contest.  They're basically the same size as the 49.5 mm tires, but they fit the axles better and in my opinion look better for a monster truck.  Another picture showing the axle width:

small%20car%20WIP4.jpg

Feedback and comments are welcome.

Posted

Progress update:

Small%20Car%20Update%201.jpg

I redesigned the axles to use 6L links, and added soft 6.5L springs.  The spring mounts only have 1 degree of freedom, but there is enough play in the frictionless mounting pins to allow the axles to rock side to side easily.  The wheelbase is also 4 studs shorter, giving a better appearance, but this required replacing the rack and pinion steering with a set of 9L links.  The engine also shrank from a V8 to a V6 to give better placement for the spring mounts.

Small%20Car%20Update%202.jpg

Significant progress has been made on the bodywork now, just need to finish the front end.  The steering was a little challenging to fit, a half-stud offset on the shaft was needed for proper geometry and range of motion.

 

And it's done!  Nice, clean (IMO) red and black bodywork with a few system parts for details.  A V8 is still possible, but the V6 fits better in the hood space.

Small%20Car%20Update%206.jpg

Functional 4-wheel steering:

Small%20Car%20Update%203.jpg

Articulating live-axle suspension: 

Small%20Car%20Update%204.jpg

Total height about 15.5 studs:

Small%20Car%20Update%207.jpg

This "small car" is ready for the contest!

Small%20Car%20Update%205.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...