Leonard Goldstein Posted September 29, 2017 Posted September 29, 2017 Hi everybody, I know I am a little bit late for a WIP-Topic in the TC12-contest. Be sure this is not a matter of tactics - I just did not know if I can handle this crazy little thing I called "Highflyer". Until yesterday evening: the first test run was successful Ok, let me show you some pics: And what is the wacky function? Please be patiently. Lets have a look at some nice details: What looks a little bit like a 4-cylinder-V-engine is the compressor for the pneumatic functions. The steering wheel is not only working - it is also hight-adjustable (what is this strange thing between the seats? The flux capacitor?) Steering wheel and seats can be moved forward and also the roof panels can be tilt up to have fully access to the technic section including the two battery boxes. Ok, but what is the wacky function??? Hm, let me give you a hint: yellow seems to be a very wacky color ... Some more details: This single spoked rims are a result of a special need of my concept: I needed motors inside the rims. Unfortunately there are no Lego rims that can fulfill this condition. Even the Porsche rims do not fit - so I decided do design my own rims. Surprisingly they work well. The rims take away only one stud in width and as a result the four L-motors are almost hidden inside the wheels. Did I mention that this baby is completely RC? Of course it is and here you can see the controller: Finally - what is the wacky function ????? Ok, I've been straining you too long. And here it is: Oh wait, what happened? Is there really a flux capacitor inside and the vehicle disappeared into the space-time continuum? Don't worry, lets keep some distance: Well this is the wackiest wacky function I could imagine. The Highflyer will pass (overtake) opponents in a unique way. And it can overcome obstacles if there are at least two small tracks left. But it was so hard to make this work. There is a gazillion of power functions inside: 4 L-motors (drive) 4 Extension cables (as the motor cables are not long enough in the wacky position) 1 Servo (steering with working steering wheel) 1 XL-motor (compressor) 1 M-motor (moving the pneumatic valves) 2 rechargeable battery boxes 2 IR-receiver 4 pneumatic zylinder 2x11 for lifting the chassis 4 pneumatic pumps in the compressor 2 pneumatic valves As you can imagine it was really difficult to make all this things fit into the car body. Sometimes I thought to call it "Tardis". For those who don't know "Dr. Who": the Tardis is a spaceship and the inside is bigger than the outside I will try make a video till the end of next week. But I need good weather as the "Highflyer" is quite to fast for indoor use. And there will be a LDD-file available. I just have to implement final changes. Well, that's it for today. If you have any suggestions, please let me know. Greetings Leonard_Goldstein Quote
ColletArrow Posted September 29, 2017 Posted September 29, 2017 Unique-looking, some interesting building styles and a great overall model... well done! I was thinking something along these lines, but never actually built it; it's just as well, yours is far wackier than mine could ever have been! How does the raising function get activated, is there a motor on the pneumatic valves? How quickly can it raise? Quote
Leonard Goldstein Posted September 29, 2017 Author Posted September 29, 2017 Hi ColletArrow, thanks! Means a lot to me, as I am still a newbie. There are two pneumatic circuits. Each consists of two pumps, a valve and two cylinders. The two valves are driven by an M-motor like you can see here (there is no pneumatics in the Ldd, so I had to replace the valve by some Liftarms and other pieces): First I tried to activate the valves by a servo but the lego servo is not strong enough to handle two valves. And I tried to use a clutch gear - but this is also not strong enough. This solution works fine and the only disadvantage is that you have to take care of the limit positions (and not let the motor running when the start/end position is reached). The raising speed is not that high (it is not fast enough for a suprise attack ). You will see it in the video next week. Regards Leonard_Goldstein Quote
MangaNOID Posted September 29, 2017 Posted September 29, 2017 This is awesome can't wait to see the video! I love how the pneumatics are quite well hidden at first. Quote
Aventador2004 Posted September 29, 2017 Posted September 29, 2017 That was my original idea! I did not end up using it, but your interpretation is better, way better. Quote
HorcikDesigns Posted September 29, 2017 Posted September 29, 2017 (edited) The level of wackiness of this vehicle is really, really HIGH. :D Can't wait to see the video. How does the steering work? like tank (or any tracked vehicle, or like conventional car?) Edited September 29, 2017 by HorcikDesigns Quote
1gor Posted September 29, 2017 Posted September 29, 2017 Very unusual vehicle; it looks on the other hand as something out of this World or very futuristic Quote
Superkoala Posted September 29, 2017 Posted September 29, 2017 Me gusta. Due to the friction of the tires i suppose you can't elevate the car if it is not driving ? Quote
Leonard Goldstein Posted September 29, 2017 Author Posted September 29, 2017 Just now, Superkoala said: Me gusta. Due to the friction of the tires i suppose you can't elevate the car if it is not driving ? This of course depends on the ground material. On the fotos you see the vehicle on a glass surface and there the lifting mechanism works without driving. On other materials this might be different. But with only a little movement forward this is really no problem. 6 minutes ago, HorcikDesigns said: The level of wackiness of this vehicle is really, really HIGH. :D Can't wait to see the video. How does the steering work? like tank (or any tracked vehicle, or like conventional car?) Thanks! Well the lifting mechanism takes almost all the space between the wheels. There was absolutely no space left for suspension or anything other. So I decided to build a super simple steering with a single axle - similar to the 42030 (but without LAs). Regards Leonard_Goldstein Quote
Boulderer Posted September 29, 2017 Posted September 29, 2017 It seems that a number of members have thought along the lines of this idea. Though as with the others, I also have to concede that your execution of the concept is far superior than anything I could come up with. I was trying to take inspiration from Professor Pat Pending's machine that had telescopic "legs" that raised him over trouble and other racers. I'm glad to see that someone has managed to do justice to the idea. Well done!! Quote
Leonard Goldstein Posted September 29, 2017 Author Posted September 29, 2017 1 hour ago, Boulderer said: It seems that a number of members have thought along the lines of this idea. Though as with the others, I also have to concede that your execution of the concept is far superior than anything I could come up with. I was trying to take inspiration from Professor Pat Pending's machine that had telescopic "legs" that raised him over trouble and other racers. I'm glad to see that someone has managed to do justice to the idea. Well done!! Thanks a lot! To cheer you up (and all others that worked on this idea): it was quite challenging for me and it was a long way of trial and error ... I explained in the resent post some troubles concerning the valve activator or the special hub design. But at the very end of building a serious disaster occurred: Stopping the engines results in a great braking moment and the front wheel suspension bent backwards (red) in the wacky position - the deformation was so big that the vehicle almost flipped over. To solve this problem I changed the angle of the whole front part of the vehicle (the steering axle is still vertical) and now it works fine. Of course this was not the only problem. The cable routing and the pneumatic tubes were very difficult, too. I really like the LDD to optimize the structure (most time I develop simultaneously in LDD and real life), but for this problem the LDD does not help at all. I wish all PF would work wireless - and pneumatics, too Regards Leonard_Goldstein Quote
mocbuild101 Posted October 2, 2017 Posted October 2, 2017 How did I miss this?!?!! This Is probably the wackiest vehicle I've seen so far! And that lifting mechanism is great, and is very well hidden. On 9/29/2017 at 8:27 PM, Leonard Goldstein said: The Highflyer will pass (overtake) opponents in a unique way. I actually planned to do the same thing with my tank, but because of the drive motors, I wasn't able to do it... You have done much better! Quote
Didumos69 Posted October 2, 2017 Posted October 2, 2017 3 hours ago, mocbuild101 said: How did I miss this?!?!! Same for me! This is rediculously cool! One of my favorite TC12 topics! Quote
Leonard Goldstein Posted October 4, 2017 Author Posted October 4, 2017 Hi Eurobricks, its time for a little update. I made a first video The weather was fine and I went to Twin Pines Mall in the lunch break. But the weather was to fine: sunlight was interrupting the IR connection to the car and I almost crashed into a barn. So I decided to come back later that night. Now the connection worked much better but the video is a little bit gloomy. Have a look: http://dai.ly/x637rzr Greetings Leonard Goldstein Quote
Aventador2004 Posted October 4, 2017 Posted October 4, 2017 57 minutes ago, Leonard Goldstein said: Twin Pines Mall Did your car leave smoke trails?! (Back to the future) Quote
offroadcreations Posted October 4, 2017 Posted October 4, 2017 Awesome car! it looks like some sort of monster hot rod. Way cool function too, that would definitely help in a real race. Quote
Leonard Goldstein Posted October 5, 2017 Author Posted October 5, 2017 8 hours ago, Aventador2004 said: Did your car leave smoke trails?! (Back to the future) That would be every Lego builders dream, wouldn't it? But even four L-motors do not reach the necessary 1.21 Gigawatt ... 6 hours ago, Offroadcreat1ons said: Awesome car! it looks like some sort of monster hot rod. Way cool function too, that would definitely help in a real race. Thanks! What I like most on this solution: it is a peaceful one. It does not harm any opponents (besides disturbing their sunbath a little). Please do not misunderstand me: it's just a game, no need to take this to serious. But I don't like building guns or something like that. I planed to make a video in a better quality (with some more daylight). But it started raining around here. So this will be a project for next week. Regards Leonard Goldstein Quote
Didumos69 Posted October 5, 2017 Posted October 5, 2017 (edited) 10 hours ago, Leonard Goldstein said: Have a look: http://dai.ly/x637rzr Cool video! Can the vehicle ride and expand / collapse at the same time? You appear to have cut the video where it collapses. I can imagine it will come apart when it folds in while the vehicle is not moving, or is that not the reason for the video cut? Edited October 5, 2017 by Didumos69 Quote
Leonard Goldstein Posted October 5, 2017 Author Posted October 5, 2017 Just now, Didumos69 said: Cool video! Can the vehicle ride and expand / collapse ate the same time? You appear to have cut the video where it collapses. I can imagine it will come apart when it folds in while the vehicle is not moving, or is that not the reason for the video cut? Hi Didomos69, yes, the vehicle can collapse while riding. In fact on an asphalt surface there is to much friction to collapse completely without riding ... During the video I moved a little forward/backward what did not look so nice - so I decided to cut this. I try to do better next time. By the way: the biggest problem of collapsing the car were the pneumatic tubes. They like to slip into the scissors and block the mechanism before the "normal" position is reached. Regards Leonard Goldstein Quote
Aventador2004 Posted October 5, 2017 Posted October 5, 2017 4 hours ago, Leonard Goldstein said: That would be every Lego builders dream, wouldn't it? But even four L-motors do not reach the necessary 1.21 gigawatt ... For me, yes. I will locate the nearest powerplant... Quote
Leonard Goldstein Posted October 5, 2017 Author Posted October 5, 2017 Hi Eurobricks, I made some very little changes to the compressor to improve stiffness (and hopefully the output of air) and now the "Highflyer" feels finished to me. So I decided to share the LDD-File: https://bricksafe.com/files/Leonard_Goldstein/tc12_leonard-goldstein_highflyer/TC12_Highflyer_by_Leonard_Goldstein.lxf Some notes for you if you want to copy this: LDD doesn't know pneumatics. All pneumatic parts are replaced by "space holders". These are arranged in a separate group and can easily be deleted (if you want to generate part lists). LDD does not accept the special rims inside the tires. They are placed beside the wheels. Get prepared for a great challenge of cable and pipe routing ... Regards Leonard Goldstein Quote
amillson Posted October 6, 2017 Posted October 6, 2017 The Highflyer is very cool and original. It would be great to see a video of it in action. Quote
Aventador2004 Posted October 6, 2017 Posted October 6, 2017 2 minutes ago, amillson said: The Highflyer is very cool and original. It would be great to see a video of it in action. Here in the quote. On 10/4/2017 at 4:28 PM, Leonard Goldstein said: Have a look: http://dai.ly/x637rzr Quote
Didumos69 Posted October 6, 2017 Posted October 6, 2017 (edited) As a fan I made a few renders of this very cool model (click to enlarge). Edited October 6, 2017 by Didumos69 Quote
Aventador2004 Posted October 6, 2017 Posted October 6, 2017 Nice renders! It looks very good in renders, but better in bricks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.