Aventador2004 Posted September 27, 2017 Posted September 27, 2017 (edited) finally finished a prototype! I was really on and off about entering, i tried about three different ideas before settling on this one. The name coincides with the guns mounted on both ends. Hog (both ends [more later]) Dual guns (hence the name) Dual seats (one each way) Symmetrical body Active bumpers (for battering rams) Lightweight body The steering is the wacky function of the build, so if you need to u-turn, the drivers swap controls. the rear seat operates both guns, and front operates throttle and steering (rear hog steers correctly to not obscure in the driver's view). The bumpers are still WIP, they are going to be wider to be like battering rams, or protect wheels. The car is driven by a powerful set of torque vectoring motors. Notice the bumper movement? Edited September 29, 2017 by Aventador2004 Quote
MegaRoi Posted September 27, 2017 Posted September 27, 2017 The bumper movement is quite wacky waiting for the finished model ... Quote
Aventador2004 Posted September 27, 2017 Author Posted September 27, 2017 8 minutes ago, MegaRoi said: The bumper movement is quite wacky waiting for the finished model ... Thanks, i agree it is quite a wacky part of the car. Quote
aminnich Posted September 27, 2017 Posted September 27, 2017 Very cool. I like the wacky function you have, but if I may give a suggestion. Have it that when the driver turns around to drive the opposite direction, the steerable axle also changes, not just that both axles steer. So basically the rotation of the chair is like a great selector and it changes which axle steers. It would be something interesting to do with a gearbox :) your builds are getting better and better, keep up the good work young grasshopper Quote
Mechbuilds Posted September 27, 2017 Posted September 27, 2017 It would be 10 times more wackier if the seats could spin. Quote
Aventador2004 Posted September 27, 2017 Author Posted September 27, 2017 38 minutes ago, Mechbuilds said: It would be 10 times more wackier if the seats could spin. Working on that, still room for it. Quote
Mechbuilds Posted September 27, 2017 Posted September 27, 2017 48 minutes ago, Aventador2004 said: Working on that, still room for it. How about mounting the seats on a geared turntable so the seats spin as the turntable spins the seats. Like a carousel. Quote
Aventador2004 Posted September 27, 2017 Author Posted September 27, 2017 39 minutes ago, Mechbuilds said: How about mounting the seats on a geared turntable so the seats spin as the turntable spins the seats. Like a carousel. my thoughts exactly. 2 hours ago, aminnich said: Very cool. I like the wacky function you have, but if I may give a suggestion. Have it that when the driver turns around to drive the opposite direction, the steerable axle also changes, not just that both axles steer. So basically the rotation of the chair is like a great selector and it changes which axle steers. It would be something interesting to do with a gearbox :) your builds are getting better and better, keep up the good work young grasshopper I thought about the chair movement, but it will be very complex. i caught grasshoppers when i was young too. Quote
Aventador2004 Posted September 27, 2017 Author Posted September 27, 2017 7 minutes ago, I_Igor said: Very original idea Thanks Igor! Quote
Aventador2004 Posted September 27, 2017 Author Posted September 27, 2017 should the build be asymetrical? to allow a cool body, but allow a spinning chair? would you vote for one of the two aforementioned ideas? Quote
aminnich Posted September 27, 2017 Posted September 27, 2017 Like a different body style for depending which way the seat is facing? Quote
Aventador2004 Posted September 27, 2017 Author Posted September 27, 2017 2 minutes ago, aminnich said: Like a different body style for depending which way the seat is facing? No, a regular body, but with a reversable seat inside. Quote
mocbuild101 Posted September 28, 2017 Posted September 28, 2017 Very interesting idea... Although I actually thought that I was going to be a ride-on lawnmower, until I looked more closely... (because the middle of the chassis is round) 14 hours ago, Aventador2004 said: should the build be asymetrical? I think you should make it as symmetrical as possible! (it would be very confusing for the other drivers! ) Quote
1gor Posted September 28, 2017 Posted September 28, 2017 perhaps you should make steering with beams and not gear rack because gears tend to dis-synchronize steering... Quote
Aventador2004 Posted September 28, 2017 Author Posted September 28, 2017 10 hours ago, mocbuild101 said: Very interesting idea... Although I actually thought that I was going to be a ride-on lawnmower, until I looked more closely... (because the middle of the chassis is round) I think you should make it as symmetrical as possible! (it would be very confusing for the other drivers! ) Okay then, thanks. 8 hours ago, I_Igor said: perhaps you should make steering with beams and not gear rack because gears tend to dis-synchronize steering... No, they align correctly, if one side is one way, the other will too. Bevel gears have very little backlash. Quote
1gor Posted September 29, 2017 Posted September 29, 2017 8 hours ago, Aventador2004 said: No, they align correctly, if one side is one way, the other will too. Bevel gears have very little backlash. That is acceptable then Quote
Aventador2004 Posted September 29, 2017 Author Posted September 29, 2017 4 hours ago, I_Igor said: That is acceptable then Good, I will try and compact this down today, with smaller tires. Quote
1gor Posted September 29, 2017 Posted September 29, 2017 Just now, Aventador2004 said: Good, I will try and compact this down today, with smaller tires. and I'll pick small battery box for my Unimog tomorrow (it has arrived ) Quote
mocbuild101 Posted September 29, 2017 Posted September 29, 2017 2 hours ago, I_Igor said: my Unimog tomorrow (it has arrived ) You should have fun with that! - I still consider it the best set I've ever had, and it's also the only set I've built more than once - in fact, I've built it 3 times... and I'm planning to build it again! (and do something, er... wacky to it) And yes, I know this is off-topic... So I'll stop talking... Quote
1gor Posted September 29, 2017 Posted September 29, 2017 3 hours ago, mocbuild101 said: You should have fun with that! - I still consider it the best set I've ever had, and it's also the only set I've built more than once - in fact, I've built it 3 times... and I'm planning to build it again! (and do something, er... wacky to it) And yes, I know this is off-topic... So I'll stop talking... Quote
Aventador2004 Posted September 30, 2017 Author Posted September 30, 2017 8 hours ago, mocbuild101 said: And yes, I know this is off-topic... So I'll stop talking... Thanks. Quote
Aventador2004 Posted October 9, 2017 Author Posted October 9, 2017 Hi everyone, Thanks for all the nice and helpful replies. I was unfortunately image to make a wheel selector that functions correctly, but made this car so much better than original one in first post. Hog (one each end) 4 wheel Steering Spinning, locking, seat. Active bumper rams. Strong body structure. Now the pictures: The seat is clamped. The seat is unclamped. Seat turned. Reclamped. I really hope you like it! It adds a racing vibe for me, with the green body. Please leave any comments or questions below! Quote
Aventador2004 Posted October 9, 2017 Author Posted October 9, 2017 13 minutes ago, Myers Lego Technic said: Nice Work! Thanks, I should have a video in the next couple days. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.