ThatOneBuilder Posted September 24, 2017 Posted September 24, 2017 (edited) 42054 has been getting a lot of love in the C-modelling department after its launch, and im pretty sure its one of the best 2h 2016 sets! Edited September 24, 2017 by ThatOneBuilder dates are confusing. Quote
1gor Posted September 24, 2017 Posted September 24, 2017 (edited) On 9/24/2017 at 5:50 AM, ThatOneBuilder said: 42054 has been getting a lot of love in the C-modelling department after its launch, and im pretty sure its one of the best 2h 2017 sets! Small correction ...sure it is one of the best 2h 2016 sets Edited September 25, 2017 by I_Igor Quote
ThatOneBuilder Posted September 24, 2017 Posted September 24, 2017 5 hours ago, I_Igor said: Small correctio ...sure it is one of the best 2h 2016 sets oh my god i feel so stupid now sorry! fixed. Quote
1gor Posted September 24, 2017 Posted September 24, 2017 1 hour ago, ThatOneBuilder said: oh my god i feel so stupid now sorry! fixed. Don't worry, it could be a typing error because nr.6 and nr.7 are side by side on every keyboard Quote
Aventador2004 Posted September 24, 2017 Author Posted September 24, 2017 7 hours ago, ThatOneBuilder said: 42054 has been getting a lot of love in the C-modelling department after its launch, and im pretty sure its one of the best 2h 2016 sets! Absolutely agree, along with the Arocs. Quote
M_longer Posted September 24, 2017 Posted September 24, 2017 8 hours ago, ThatOneBuilder said: 42054 has been getting a lot of love in the C-modelling department after its launch, and im pretty sure its one of the best 2h 2016 sets! Big wheels + wide range of gears + many typical Technic parts. I have a problem with 42053 for instance, it has lots of useful parts, but those skateboard wheels make rebuilding it into something else difficult. Quote
Aventador2004 Posted September 24, 2017 Author Posted September 24, 2017 27 minutes ago, M_longer said: Big wheels + wide range of gears + many typical Technic parts. I have a problem with 42053 for instance, it has lots of useful parts, but those skateboard wheels make rebuilding it into something else difficult. I agree with you on that, a better wheel loader c model, but that is all I see currently. Quote
1gor Posted September 24, 2017 Posted September 24, 2017 6 hours ago, Aventador2004 said: Absolutely agree, along with the Arocs. I better should not mention that Arocs was 2015 flagship, but Xerion could be a flagship some other year like 2012 or even 2008... Quote
Aventador2004 Posted September 25, 2017 Author Posted September 25, 2017 A video is filmed, but needs to be uploaded, tomorrow or the next day. Quote
1gor Posted September 25, 2017 Posted September 25, 2017 9 hours ago, Aventador2004 said: A video is filmed, but needs to be uploaded, tomorrow or the next day. ...and we are anxious to see your MOC in (you know lights, camera, ) action Quote
Aventador2004 Posted September 26, 2017 Author Posted September 26, 2017 (edited) On 9/25/2017 at 7:17 AM, I_Igor said: ...and we are anxious to see your MOC in (you know lights, camera, ) action i will edit the first post later with a video, and post here. more pictures: with my modded 8069. (edit: tires still backwards!) enjoy! Edited September 26, 2017 by Aventador2004 Quote
1gor Posted September 26, 2017 Posted September 26, 2017 Now imagine how cool would be with 8455 set Quote
Aventador2004 Posted September 26, 2017 Author Posted September 26, 2017 18 minutes ago, I_Igor said: Now imagine how cool would be with 8455 set already can, it was on my list to get, but the 8069 looks cooler IMO. Quote
1gor Posted September 26, 2017 Posted September 26, 2017 2 hours ago, Aventador2004 said: already can, it was on my list to get, but the 8069 looks cooler IMO. 8455 is my favorite pneumatic set, but could not afford it myself, so I've made it in colors that are in LEGO Technic from 2008 as you cam see here http://www.brickshelf.com/cgi-bin/gallery.cgi?f=497487 Anyway yellow and lime combo is interesting Quote
Aventador2004 Posted September 26, 2017 Author Posted September 26, 2017 24 minutes ago, I_Igor said: Anyway yellow and lime combo is interesting Hopefully i can rebuild my telehandler, tracked mini excavator, and get the crawler crane for a epic construction scene. Quote
aminnich Posted September 26, 2017 Posted September 26, 2017 oh no... did you write on the panels with marker?? Quote
Aventador2004 Posted September 26, 2017 Author Posted September 26, 2017 4 minutes ago, aminnich said: oh no... did you write on the panels with marker?? No, tape, and I forgot to remove it. Quote
aminnich Posted September 26, 2017 Posted September 26, 2017 phew, sigh of relief Still planing on a video for tonight? Quote
Aventador2004 Posted September 26, 2017 Author Posted September 26, 2017 28 minutes ago, aminnich said: phew, sigh of relief Still planing on a video for tonight? Yup, it is a unedited vid showing steering and dumping. Quote
Erik Leppen Posted September 26, 2017 Posted September 26, 2017 This looks like it comes straight off one of those futuristic RTS video games as a resource-carrying truck. That's what it makes me think of. I like it. The use of lime is nicely laid out. The bed may be a bit small but I think it matches the rest of the vehicle nicely. Making it bigger would pull things out of proportion maybe. The seat could be a bit further backwards though. If you sit in this, it's almost as if you're outside of the cabin. I think if you swap the black 2L cross blocks that hold the seat, so the seat is 2 studs backwards relative to where it is now, it would be better. (But I don't know if there's anything in the way for that). Also, if parts availabilty permits it, I'd put two seats instead of one, to the left and right of the steering HOG axle. Then, seats can be even further backwards, so the driver can actually use the small side windows of the cabin. Also, maybe you can swap the two 2x3x5 panels with the two 2x3x7 panels in a way, so the Claas stickers aren't upside down :) For the rest, nice model. Quote
dagupa Posted September 26, 2017 Posted September 26, 2017 I like the cabin and the tires look very good. It looks like something you would drive on Mars. Maybe a lab instead of a dumper. Quote
Aventador2004 Posted September 27, 2017 Author Posted September 27, 2017 1 hour ago, Erik Leppen said: This looks like it comes straight off one of those futuristic RTS video games as a resource-carrying truck. That's what it makes me think of. I like it. The use of lime is nicely laid out. The bed may be a bit small but I think it matches the rest of the vehicle nicely. Making it bigger would pull things out of proportion maybe. The seat could be a bit further backwards though. If you sit in this, it's almost as if you're outside of the cabin. I think if you swap the black 2L cross blocks that hold the seat, so the seat is 2 studs backwards relative to where it is now, it would be better. (But I don't know if there's anything in the way for that). Also, if parts availabilty permits it, I'd put two seats instead of one, to the left and right of the steering HOG axle. Then, seats can be even further backwards, so the driver can actually use the small side windows of the cabin. Also, maybe you can swap the two 2x3x5 panels with the two 2x3x7 panels in a way, so the Claas stickers aren't upside down :) For the rest, nice model. I can try adding more seats, but I like the way the panels are put. The bed looks odd any bigger, but I agree it is like a resource vehicle, maybe I can mod it to be my Tc12 entry, as a mobile base / resource service. 34 minutes ago, dagupa said: I like the cabin and the tires look very good. It looks like something you would drive on Mars. Maybe a lab instead of a dumper. Thank you, I can try a lab after, and have a hook lift attachment, to move the lab to the ground. Sorry the video is taking long, I hadn't found time. Quote
Aventador2004 Posted September 27, 2017 Author Posted September 27, 2017 Sorry for long wait, but video is ready, it was short due to YouTube size limit, and quality isn't great, (on wifi, still no hd! What?!) Quote
mocbuild101 Posted September 27, 2017 Posted September 27, 2017 3 hours ago, Aventador2004 said: it was short due to YouTube size limit, and quality isn't great That's strange... The limit is 2GB or 15 minutes, which easily allows FHD video... What file type are you using? ...or you not compressing your video at all? Quote
1gor Posted September 27, 2017 Posted September 27, 2017 9 hours ago, Aventador2004 said: Hopefully i can rebuild my telehandler, tracked mini excavator, and get the crawler crane for a epic construction scene. Then you would need construction site Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.