Minifig Customisation Workshop Latest Topics

In times of peril the old Gods awaken with the wrath of nature herself. Treebukadnezar’s two eyes never sleep or tire as they watch out for intruders in the Sacred Groves. Three times the size of an Elf, these wooden giants fear neither sword nor spear. Their four arms are ready to pierce any enemy flesh or metal. Among his kin, Treebukadnezar the Branchwraith is the one to wield the power to summon the elemental energies of the Goddess herself. Channelled through his staff these energies are shaped into helpful magical creatures such as the black eagle, his favourite familiar which can be sent out for reconnaissance or other helpful tasks.

Customization Notes:

Needless to say this is the most complex fig I have ever made. However, it only uses official LEGO parts. Almost a purist fig.

- Head: Atlantis sea creature head, painted and extra horns attached.
- Torso: Ninjago add-on torso stacked on a Geonosis warrios torso, painted. The lower arms can still move.
- Legs: Long Avatar legs. In older figs, I had to paint Toy Story legs, with the new Avatar ones in dark tan this is no longer necessary. So my newer Dryads look cleaner and even have moveable legs. I glued a lot of painted claws on them and the olive green 1x1 plate makes him even taller.
- Arms: Cut from leaves part, painted
- Hand: AND THIS IS SO AWESOME: The hand holding the staff is from a LEGO keychain LED flashlight. It perfectly fits around the staff. Painted.
- Bird: Painted.
- Back armor: cut and painted.

Follow "mwardancer" on Instagram.

Swordmaster of Greeneth

Sun, 25 Jan 2026 09:25:32 +0000

Swordmaster of Greeneth

These skilled swordsmen run into battle wielding their giant swords.

Customization Notes:

Helmet: Aliexpress, plume attached and painted
Shield: Cultbricks
Cape: CapeMadness metallic
Sword: Loongbrick, painted

I used Citadel paints for this one covered with Revell semi-glossy. The Citadel color palette is huge, but I am not sure if I will ever switch completely.

Cultbricks and Loongbrick are relatively new to me. Cultbricks only makes very small limited batches, so I was only able to buy only 3 of the shields. Now I need 6 more to make a regiment. Bummer.

Loongbrick focusses on realistic medieval equipment, but I immediately thought "Swordmasters of Hoeth" when I saw it. Fortunately it reached me without toll fees.

Carrying the Goddess Banner: Lord Marthrandir on Warhorse Felsentritt

Sat, 17 Jan 2026 17:24:56 +0000

Carrying the Goddess Banner: Lord Marthrandir on Warhorse Felsentritt

Woven from the hair of the finest Elven maidens, the Goddess Banner blesses those who keep a steadfast eye on her everlasting light.

It is pure hope that Lord Marthrandir and his trusted warhorse Felsentritt carry into battle.

But when hope seems to fade in hours of darkness, a swift sword and four stalwart hooves are also available for support.

Customization Notes:

Horse:
- armor pieces cut from various Brickwarriors parts, painted
- helmet: wings attached, painted
- horse blanket: handmade by a dear friend
- dagger: Brickwarriors

Rider:
- Helmet: cut and carved from a werewolf head
- armor: atlantis armor painted
- sword: Brickwarriors, painted
- cape: CapeMadness

Goddess Banner:
- AI generated logo. I wanted to add some Elven breasts, but AI did not let me.
- printed on 340g Inkjet canvas paper, it has a wonderful canvas structure, HIGHLY recommended
- use a metal ruler and a scalpel to cut it
- hand-painted golden and silver accents
- the rest of the banner is painted Lego bars and staffs and parts

Ever since I made the original fig 12 years ago, I felt a need for better banners. I am very happy about having found a way to make my own. There are many more to come. I did not know that regular inkjet printers could print on such a canvas paper. With AI logo generation and this paper, there are unlimited options for army builders now.

Follow "mwardancer" on Instagram.

Who recognizes this custom hat piece and where it's from?

Thu, 18 Dec 2025 01:05:01 +0000

This hat is exactly what I'm looking for but so far I haven't been able to track down where it comes from, where to get it or who made it.

The figure seems to be a custom of The Ghoul.

Pad-Printing Minifigure Torsos

Sat, 03 May 2025 01:08:49 +0000

I'm going to wait until they release a list of the Minifigures to be featured in the Lego Ideas Capsule Machine set; but Who should I talk to about custom Pad-Printing an updated Front and back torso for Captain Iron Hook from the Classic Pirates line?

A grove of Feral Forest Splinters lead by a Timber Dryad

Fri, 10 Oct 2025 20:00:28 +0000

A grove of Feral Forest Splinters lead by a Timber Dryad

Soon after the male seedlings sprout they become Splinters. What they lack in the towering awe of taller Dryads they make up in scratchy-spiky playfulness.

Aspiring to become adult Timbers one day they roam the woods eager to playfully scratch-spike-impale undesired visitors.

Their greatest honor one day might be to fall into a century long slumber and wake up a full grown Dryad Deity.

Customization Notes:

These are a pain in the megablocks to make. But the forest grows. A second deity has awakened and will reveal itself soon.

Body: I bought six Demogorgon keychains and ripped out the chains. This is a very affordable way to get many Demogorgons. So I will build six Splinters in total. I did not want the Groot bodies, because the Demogorgon bodies look more fierce and less humanoid.

Head: I bought six cheap knockoff Groots... in the wrong color. Then I bought six original Groots just for the heads. I glued on extra bits and painted some parts.

Feet: The claws are cut from the the same shoulder armor bit used on the shoulders.

Shoulders: This is a shoulder armor upside-down and painted.

Tail: This is a Brickwarriors' harpy tail, painted.

Claws: Cut and painted.

Dryads have always been a favourite project of mine, because I find them very difficult to make. Humanoid, but not human, irregular shapes and so on. I am going to redo many of the ones I already have and make some big new ones until I finally have something of a walking forest.

Follow "mwardancer" on Instagram.

BrickArms Army Men Pack Now Available

Mon, 01 Mar 2010 18:42:29 +0000

If your green army men figs are looking to increase their firepower, BrickArms is proud to announce the new BrickArms Army Men Pack!

This pack includes over 25 accessories in 100% color-matched green, including several brand new BrickArms accessories (which are no longer just prototypes but mass produced accessories! ):

- BAR

- M1 Carbine

- Sawed-off Shotgun

- M203 Grenade Launcher

- M1917 Revolver

All of those accessories will eventually be available as individual items in a variety of colors, but all of the accessories in this pack will only be available in green as part of the Army Men Pack.

This pack is now available from BrickArms and all official BrickArms resellers!

Anyone got any backed up decals from

Sun, 31 Aug 2025 22:12:32 +0000

Hi guys I’m wondering if anyone manage to backed up decals from websites that don’t exist anymore like majhost.com

Custom Minifigures on Kickstarter

Wed, 18 Nov 2015 13:09:34 +0000

Hi everyone!

I've just launched a Kickstarter campaign with the goal of making custom printed minifigs, and wanted to share some of the designs we're including in the campaign (we're also offering bespoke made-to-order figures!) You can click the link in my sig for more info, here are the designs - hope you like them and I'd love to hear your thoughts!

*EDIT*

Perhaps the most promising figure is the bespoke made-to-order minifig!

Decal Wish List

Sat, 17 Nov 2007 20:16:54 +0000

This is the place for requesting a decal.

Anyone who wants can respond to a request and take the challenge of creating the decal.

However, there is no guarantee that your decal will be created once you made a request in this thread.

Some rules:

- Only make decal requests in this thead!

- This thread is only for requests and replies when you agree to create a decal.

- Several people can respond to the same request.

- Only the creator has the right to sell his decal (on eBay, Bricklink, ...).

- Decals must be credited to it's creator when posted in pictures.

- Posting some pictures of the applied decal will be appreciated by the creator.

Please don't waste anyones time, ONLY request a decal if you plan to print and apply it to a minifig !!!

Decal templates

Mon, 09 Apr 2018 14:28:25 +0000

Hi!

Does anyone any on know where to find accurate decal templates for torso, legs and arms? I would be really cool if it is already scaled to minifigure size. That would save me alot of time.

Thanks!

Aaron

Napoleonic drum

Thu, 27 Mar 2025 21:24:29 +0000

A drum for the first empire
https://www.facebook.com/photo.php?fbid=1836183520250362&set=pb.100015761952339.-2207520000&type=3

Napoleon bicorn

Thu, 27 Mar 2025 21:16:43 +0000

sanding a bicorn and making a cockade
As for my 1st Empire customs in Playmobil (uh sorry), I'm going to sculpt 1st Empire sets for my Lego

Monochrome Minifigures

Thu, 29 Mar 2012 19:32:09 +0000

Hi there,

I just wanted to share my collection of monochrome minifigures with you. I finally got the possibility to make some photos

Chrome and Greys

Colors

Noncomplete Colors

"Cheated Colors"

- Sand Green, Dark Bluish Gray and Bright Green are missing a complete plain torso

- Chrome Gold is a cut keychain

Colorwheel

Hope you like it!

Sebastian

How to search for dual-molded/ printed legs?

Sun, 12 Jan 2025 21:53:17 +0000

Is there a database out there that accurately classifies legs by descriptions of what color combinations are featured?

I am looking for a dual-molded or printed legs part where the hips and upper legs are either black or blue, and the lower parts are brown, if this even exists. Alternatively, blue and black. I am trying to make a MOC'ed minifig of the Disney character Beast.

I tried Bricklink but it does not really display everything. Just to show my point, I typed "legs blue black" and I know that there is such legs from Oswald the Rabbit and it did not show up on BL.

New printing method

Sun, 22 Dec 2024 10:27:18 +0000

Gentlemen,

I found this technic on youtube:

https://youtu.be/WP-sarffR7c?si=xacEdwe4AyOcV5NK

The photo transfert.

It seems promising. Before i invest in a laser printer, is someone here who tested it? It seems to give nice results without waterslide decal nor uv print.

Thanks.

Is Mini Figure Customization Dead?

Sat, 01 Jun 2024 02:50:01 +0000

The hobby of creating and designing your own Lego minifigures seems to be a dying community within Lego. Going back 10 years or further Lego customization of minifigures was once a very popular topic where creative people would share their own work and methods of creating a minifigure unique to them or a certain theme. Yet as times go on I see less and less creative minds building unique figures but why is that? Has the detailed quality of official Lego minifigures reached a point which surpasses most enthusiasts built custom minifigures? Or is it the aftermarket offering more choices in Lego like weapons, helmets, armor ect at an affordable price? But what are your own thoughts on this matter?

Purist Frank Costanza (Seinfeld). Happy Festivus!

Sun, 22 Dec 2024 21:22:31 +0000

An appropriate day to share this.

Flickr

New Vector Files for the New Factions

Fri, 13 Dec 2024 04:43:09 +0000

I have redrawn the new logos in Vector if anyone wants them.

NewLegoShields by Natesroom, on Flickr

New Wolfpack Logo

Tue, 17 Dec 2024 05:35:31 +0000

I went ahead and recreated the new wolfpack logo. I like it! I compared it to the original for your enjoyment

Additional Kite Shields Artwork

Sat, 14 Dec 2024 22:16:52 +0000

Got into a mode and redrew 5 additional Kite Shields. The CMF Elf was the hardest one i've had to do.

Question about displaying/ storing minifigs

Sat, 30 Nov 2024 05:17:15 +0000

When storing/ displaying minifigs, is it best to have them not hold accessories? I read somewhere that the minifig hands can break in the long term when holding weapons/ accessories.

I have a huge collection of minifigs from various themes and will be displaying them in IKEA Sannahed frames (inserts have the inverted bricks glued to them as pedestals for the minifigs). Many of my Star Wars minifigs came with weapons. I really like the idea that each minifig holds the weapons/ accessories it came in the set with, but will set those aside if it would be lead to the hands cracking over time.

By the way, I store my minifigs in my basement where it is cool all year round.

Any suggestions for cataloging the figs?

Dark Elf Silver Thread Archer

Thu, 31 Oct 2024 17:34:48 +0000

Dark Elf Silver Thread Archer by MWardancer

When he aims at you, your life is hanging by a thread.These versatile archers use their longbows to shoot normal arrow as well as the rare Dragon Glass (TM) arrows to pierce ephemeral beings.

Customization Notes:
At some point I noticed I did not have a regular Dark Elf archer. So I made a light, basic, not very spectacular one. I am not satisfied with the range of bows and quivers Lego offers and grew fond of the Aliexpress ones. They even have typical Elven ornaments on them. Since I have to mix my own paints I am quite happy how the new batch of light blueish gray and semi-glossy turned out. The painting on the ears is not 100%, but neither is Lego's...

- Body: Lego Chima Keychain with the chain ripped out
- Cape: Cape Madness
- Bow and Quiver: Aliexpress, painted
- Hair: Painted
- Arrow: Brickwarriors

Star Wars inspired custom LEGO accessories

Fri, 16 Feb 2024 11:17:30 +0000

Hi everyone,

Here are a few custom Star Wars inspired designs that I've completed:

I'm interested in selling these designs one by one, or as a set for a good price.

I also have a bunch of other accessories designs related to the Marvel universe, as well as other custom pieces that can be printed out.

All of my designs come as STL/OBJ files, which you can use to 3d print them using your printer, or by using a 3rd party printing services such as Shapeways.com

The designs are precisely aligned/fitted, and will fit perfectly on the actual LEGO minifigure.

---

Best,

Rafael

---

Dark Elf Ceremonial Guard

Thu, 12 Sep 2024 13:17:21 +0000

Dark Elf Ceremonial Guard

Ceremonial in name, but not very ceremonial in combat, these Dark Elves have sworn to protect the Emperor with their swords.

Dark Elf Ceremonial Guard by MWardancer, auf Flickr

Customization Notes:
- weapon: Aliexpress
- helmet: Aliexpress, painted, added plume, painted
- shield: two shields glued together with a new handle
- cape: Cape Madness

I have been wanting to make a fighter with the slope legpiece for a long time and when finally the Jazz Singer became available for a good price I bought three of them. I am very angry that the expensive and rare goblin shield is printed off-center most times. The one shown here is the best one I have. I quite enjoy the variety of weapons on Aliexpress. Finding an armor that sits well with the cape was easy.

Purist POTC figures

Sun, 15 Sep 2024 14:11:50 +0000

Im currently in the process of making a UCS Black Pearl and would like to have a few figs who were never given official minis.

I’d like to make:

patel, ragetti, Marty, cotton, and any other original crew from curse or black pearl.
Any suggestions for purist elements to make these?

MiniFigure Head decals (130 facial expressions)

Wed, 01 Jul 2009 01:51:57 +0000

Several face expression with small differences to have a large mixture of expressions. More will follow.

I will also make them for transparent decal paper when I'm finished.

C&C is welcome and I hope you like them...

Added on 2 June

Added on 3 June

Added on 4 June ( for Rubén Riojas - request)

Added on 21 July

Tips for unwrapping curved shapes?

Sun, 04 Aug 2024 15:57:00 +0000

Apologies if this isn't the right section for it since it's not strictly minifig related, but as this is the customization section with some resources for decals, I thought this was the most appropriate area for it.

I'm working on some custom decals for a MOC. Most of it is pretty simple, flat shapes and the like. I do want to do a full cover decal for one of the newer windscreen parts, and I'm trying to figure out the best method for unwrapping the curves of it to get an accurate flat pattern. A less-than-exact method could be to cover the physical part in tape, trace out the edges, then remove the tape and scan that to get a somewhat accurate unwrap of the part. Not convinced it'd be accurate enough for a cut sticker to properly meet up at the edges, though. I'm currently modeling the part in CAD to derive accurate dimensions from, but it won't really help when it comes to flattening the curves themselves as I don't think there's a method to flatten the surface. As far as I can tell it's not a compound curve so there should be a geometric method to flatten it.

From what I can tell, the curves are all constant radius in 2 axis, which is simple enough, but when the other dimension is at an angle to that flat face, is there a good method to derive the final curvature and angles from it? I was thinking of taking the CAD model into Blender and doing a UV Unwrap of the curved face in there, but there's no guarantee that it's not warped and it's very difficult to verify. I could try to figure out the resulting elliptical shape from the intersection, but my geometry skill isn't quiiiite there to figure out the exact angle of the flat sides at the tangent point.

Do you guys have any tried and true methods for getting a good dieline for edge-edge decals on curved parts?

Any suggestions for a Good Witch and Wizard of Oz?

Tue, 06 Aug 2024 05:26:21 +0000

Might anyone have suggestions for parts to put together to come up with a minifig for Glinda and The Wizard?

I was initially thinking that Glinda's skirt could be the one from the Rococo Artistocrat CMF.

I completed all four minifigs from The Lego Movie plus the Witch and Monkeys to put together in a frame. I think Disney is intent on keeping the Wizard of Oz in the minidoll line so I doubt we will get some minifigs soon.

Original LEGO Stickers DPI?

Mon, 16 May 2022 09:57:29 +0000

Does anybody know the print resolution of the original LEGO stickers? (In DPI or PPI)
Educated guesses are welcome.

Thanks!

What to look for in a printer?

Sat, 03 Feb 2024 19:14:26 +0000

Hey!

I downloaded Inkscape and started making decals which went out of hand. I wa planning on just making a handful of designs and then do a testprint. But the printer we had have given up.

Making decals was fun though so I've probably made around 30 designs and versions by now.

But since the printer did not work I need a printer so I can use the decal designs.

So to my question, what to look for in a printer?

Is Inkjet or laserjet the best for printing decals?

I have planned to more or less only use clear decal paper.

I've read about dpi and settings and everything. My knowledge about printers are close to zero.

What should I be looking for when buying a printer? Is there something specific I should look into or can I just go to the store and buy the cheapest inkjet they have?

I'd love to hear what you have to say so I can start printing and share what I've been working on!

Repairing a Technic Figure

Mon, 27 Apr 2015 08:40:24 +0000

Hi guys. As you can tell from the title I need to repair a technic figure. I have this guy:

And most unfortunately someone small used him a little like a doll and his left arm snapped off at the shoulder joint. Now, what happened is the pin/peg snapped clean at the point it met the arm, so the entirety of it is inside the torso with a tiny dimple left on the arm itself.

I noticed the peg was hollow and the arm did have a dimple, so running a small risk of limited movement I attempted my own repair.

Using a carefully trimmed piece of the sprue two minifig keys come on I dipped the one end of this little pin/rod into Revell Model Glue and popped it into the hole of the pin left in the shoulder.

So far, so good. The glue cured and the new repair pin remained in place with normal handling. Then I trimmed it to the best length to attach the arm using the remains of the original peg. Dabbed glue into the dimple of the broken peg on the arm, placed it onto the pin and with a little masking tape to hold it in place, left the glue to cure.

First try, the arm came away with the tape. Second try, the arm fell off once the tape was gone. It is leaving a nice mass of glue on the tip of the pin (formed to the shape of the dimple on the arm...) I am guessing it is either not the best adhesive to use in this situation, the plastics won't bond or that there just isn't enough of the original peg left on the arm to join it right.

What would you suggest? I could get a different glue (I am on the hunt for some as a few action figures got mashed too. Poor Sam Flynn is now headless and my Big Duo is Last Appearance accurate!) or is it better to get the leftover peg out of the torso and put a new arm in?

Clone X Trooper from Bad Batch

Wed, 20 Mar 2024 10:12:11 +0000

Hi all

Having started to build the Dagger Ship from Bad Batch I need an X Trooper/Assassin for my build display. Any of you minifigure experts got any ideas for the helmet?

Cheers

Jon

Live Action Captain Rex

Wed, 13 Mar 2024 01:08:09 +0000

Hello fellow Eurobrick members,

After I watched the Asoka Tv series I was inspired to re-create Captain Rex in his iconic phase 1 armor using custom created graphics and waterslide decals. When it came to the design of the figure I could have taken the easy route and copied Lego design for the current phase 1 trooper however that's not me. Instead I spent time going over every detail of my refence material from the Asoka Tv series to ensure the end project meet my personal requirements. One import idea I kept in my mind when creating the design was ensuring it still kept and integrated with current Lego minifigure graphics. I would love to read your feedback and if you have any comments on how I could further improve this figure I would appreciate it so the next figure is even better.

More Custom Torsos

Mon, 03 Sep 2007 04:25:16 +0000

I've been pretty busy lately but there have been a couple of torsos I've really wanted to get finished because I love the pirate characters... tell me what you think!

Alatriste

Black Pirate

Green Pirate

Lord Beckett Style (Adaption from a Morsana Design)

http://i93.photobucket.com/albums/l48/SirS...cave_battle.jpg

more torsos to come...

New Lion and Falcon Shield

Thu, 23 Jun 2022 02:01:55 +0000

I recreated the New Lion and Falcon Logos in vector if anyone wants them.

Marwood Outfoxer

Thu, 15 Feb 2024 20:24:25 +0000

Marwood Outfoxer

Marwood Outfoxer (revisited 2024) by MWardancer

Customization Notes:
- hood: painted
- scarf/mask: painted, I had to cut off some parts in the back in order to make space for the quiver
- quiver: does not use a neck brace anymore, but a pin which I glued to it. the pin goes through a hole in the cape into a hollow stud which is glued to the back of the fig. I don't like archers without arrows.
- cape: I have a special hole punch to make the hole for the quiver
- bow: painted a little

I have a regiment pending, in which I will vary some colours a bit. It might take a while as the paint job here is quite long. Two layers of green and one layer of semi-glossy adds up to quite some work. Some of the parts were quite expensive. But I am very glad this worked out, I like how the hood with the ears matches the wolf/fox brooch.

Wood Elf Eternal Guard Regiment led by General Haldir Na Palm

Thu, 25 Jan 2024 13:26:30 +0000

Wood Elf Eternal Guard Regiment led by General Haldir Na Palm

Wood Elf Eternal Guard Regiment led by General Haldir Na Palm by MWardancer

Customization notes regiment:
- the bodies are cheap China Koruit clone brand Elf (although not a clone, because LEGO never made a fig like this)
- the feet were painted green to reduce the painfully high amount of pearl gold
- the helmets are a China Koruit clone brand Gondor helmet (although not a clone, because LEGO never made a helmet like this), this was painted gold and green (to reduce the painfully high amount of pearl gold)
- in order to insert LEGO hands (to reduce the painfully high amount of pearl gold), I had to widen the holes in the arms with a drill
- the Koruit spears are painted completely to reduce the painfully high amount of pearl gold
- the capes are from Cape Madness
- the standard is made from various bits and pieces

Customization Notes Haldir Na Palm:
- helmet: cheap Aliexpress helmet, painted
- weapon: two Aliexpress daggers glued and painted
- shoulder armor: official LEGO piece painted
- cape from CapeMadness

This stood on my shelf for a long time. It took me 4 years to get from one guard to the whole regiment, so I am glad to have finished this.

Harpy Queen Madeira Nocturnia

Fri, 12 Jan 2024 08:54:51 +0000

Harpy Queen Madeira Nocturnia

Harpy Queen Madeira Nocturnia by MWardancer

Being a Harpy used to be fun. It was all in the little things. Flapping around at night, feeding on the occasional horse, sheep or cow, tormenting the occasional peasant. And of course the annual full moon fertility festival with the ever so panicky villagers. Oh, how joyful this had been for the small, but cozy Harpy tribe. But ever since Queen Madeira had found the crown and this... thing, she was all serious and gloomy and barely left the nest. To expand the harpy race, she mumbled at night, to expand, to multiply with many eggs. The three sisters, Celeste, Triéste and Finesse did not like the sound of this. But to fly somewhere else...?

Customization Notes:
- Crown: Nighmare King crown, painted
- legs: painted
- tail: Brickwarriors
- wings: Brickwarriors
- wand: I don't remember
- vambraces: Brickwarriors, painted
- hands: skelton hands, cut off and glued

I had been wanting to make a really old harpy for a long time, but one that looked a bit different than the young sisters. When the Nightmare King was released, I finally made found the parts I had been imagining. The most interesting bit was deciding the color of the crown and the vambraces. I did not want to give her a real weapon as harpies don't use weapons, but a scepter of some sort. I like how it is mirrored in the color around her eyes. I was glas the legs mix well with the Chima "belt". Had to paint the crotch though.

Civil war figures:

Wed, 03 Jan 2024 16:13:57 +0000

test of external printed decals and 3d printed and colored custom hats for civil war era.

Dreamzzz decals

Fri, 05 Jan 2024 19:25:45 +0000

I’m working on making the Dreamzzz decals. So far I have two done. I will update this topic with lists of the current work in progress and add the various characters made.

You can use these decals for your own use as long as you let me know or credit me please they took a long time to make.

The links will take you Flickr where you can download them at the original size. To print them print them at 100% on sticker paper (or whatever way you print your decals) and they should fit exactly on the minifigure. If you have problems feel free to ask questions I'll do my best to help.

Example:

Made:

Cooper Pants

Mateo Torso and Pants

Izzy Torso and Pants

Zoe Torso and Pants

Logan Torso and Pants

Woolley Gym Uniform

Classic Knight Torso Decals

Tue, 02 Jan 2024 14:54:58 +0000

Hello

I am looking for the torso decals, preferably as SVG or image in high resolution of the classic lion knights. Like this one here:
can anyone help me?

Regards twisters

[Purist Minifigs] Exetrius' figs

Sun, 15 Dec 2019 21:56:22 +0000

Hi! This is the thread where I'll be posting my figs from time to time, glad to have you here!

I've been quite active making OC figs in the past (not so much nowadays) but I never really shared a lot of them on EB, most of them stayed on Flickr. Recently I've been compiling years worth of individual figure shots into collages, in an attempt to streamline my Flickr photostream and to also free up some space for future images. I thought now would be a good time to share them.

In no particular order:

Alternate Ninjago

Pythor (Ninjago Rebooted) || Galactic Federation Zane || Cyborg Ronin

Captain Cole || Saiyan Kai || Darth Cole

Magma Cole || Relic hunter Zane || Saiyan Cole

Modern fantasy & sci-fi

Business Man || Agent Headhunter || Scarletti Pilot

Black(White)tron || Roadhoa || Deathgun

Saiyan || Agent Wolffe || Techno Ninja Hunter

Medieval fantasy 1

Warrior || Dragon Drow || Uorenn Kerbunnt || Siralia of Ilyasvir

Agéra || Reptarian || Vampire ronin || Dragon Rider

Enzan Armafur || Exetrius Centario (custom army uniform) || Pumpkin mage || Aethereal guard

The OC Ninja project

Green Ninja || Master of Spinjitzu || Ninja of Stars || Quérardo

Scalpellina || Airiana || Retrorius || OctanCorp Ninja

Tsunamo || Crimson Skull || InstaGoProNinja || Yoshinturamachi Sasekageojima

_________________

2019:

Ninjago figbarf (Serpentine tomb)

Nindroid || Overlord-possessed Min-droid || Techno robes Jay || Techno robes Kai || Venomari Leader || Tomb guard Lasha || Stone Army scout statue || Stone Army warrior statue

Villains figbarf

Supercharge || Alexei "The X" Erpotov || Deathwing || Umbra Brittanica || Dr. Osmund

Divine beauties figbarf

Cavernis || Kitsunari || Yokazuki (top) || Onibashiri (bottom) || Racha'on || Umiamaru

_________________

Thanks for looking!

French cadet of military academy of saint cyr

Mon, 19 Jun 2023 20:08:18 +0000

Hello everyone,

I've just finished my last custom.

A french second lieutenant from the french military academy of saint cyr, created in 1804 by Napoleon (the old one, not the eurobricks emperor).

Nowadays, they still wear the uniform of the 2nd half of the 19th century.

French cadet from military academy of saint cyr by LA BRIQUE DE CAMBRONNE, sur Flickr

steindrucker.com not responding printing inquiry? Anyone else

Sat, 09 Dec 2023 14:59:04 +0000

Hello,

Has anyone recently had success on steindrucker taking order or responding to Emails? I have known of several attempts and there is no response to email inquiries. Is he even still printing figure orders or is it the location that he is avoiding.

I really think it would be more professional and polite to respond to email whether negative or positive for the project. I have also noticed several other print places that don't even bother to respond. A couple have which was nice.

Is this common with no replies, I would be afraid to use Steindrucker website to order without first making contact if the project can be done and the amount of backlog before completion.

The Red Lancers

Thu, 30 Jul 2009 11:49:53 +0000

Earlier i posted some pics of the Trumpeter. Here are now some of the cavalry troopers of this famous regiment. The Czapskas or hats they are wearing again i ordered from shapeways(woodys designs) and painted them and added the cords and plumes.

Can any of these Civil War decals from this eBay seller be attributed

Tue, 20 Apr 2010 04:32:52 +0000

edit: It looks like my heading was too long and was cut off. It should read: "Can any of these Civil War decals from this eBay seller be attributed to someone else?"

Hi all,

Sorry I don't get to post very much...I'm crazy busy all the time it seems.

I'm writing because I need your help. Some of you may know that I'm a big fan of doing Civil War stuff in Lego. Time to time, I search "Lego Civil War" on eBay to see what cavalry figs are going for these days.

Incidentally, there is a person selling "custom" Civil War Lego minifigs and models. This one really ticked me off:

The Custom Kit in Question

Compare that cannon, if you will, to the one I made four years ago (for my Civil War stuff no less).

Even though hers looks ever so slightly different, you can definitely see an uncanny resemblance, and I don't think it's mere coincidence. I mean, she specializes in selling "custom" Civil War Lego stuff, so I'm sure she did google searches on "Lego Civil War." I'm pretty disheartened over the fact that my design is being ripped off and sold for profit. Sent her a message to please come up with her own cannon design and stop selling the one that looked like mine.

Seeing that, made me call into question whether or not the decal designs in those listings are hers. I know that she once used legofreak's. How do the decals on these minifigs look? Anything look familiar?

princess1226's listings

Thanks for your help!

Lego hair pieces

Wed, 25 Nov 2015 15:09:33 +0000

UPDATE ON PAGE 18! - New updated list

Over the years Lego has produced over 400 minifigure hair pieces. This thread collects everything about lego hair pieces, share your opinion here! Regarding:

new hair molds; new hair prints or colors; hair pieces wishlist; comparing new hair pieces with old versions; your favorite hair piece ever made; your top 5 hair pieces; your hair pieces collection; your latest purchase; upcoming hair pieces; available hair pieces on bricks and pieces; licensed hair pieces; rare ones; new recolor; expensive hair pieces on bricklink;

To make it easier I've made this list and divided it into many categories to have better overview:

- Male hair pieces

- Female hairpieces

- Elves hairpieces

- Hair-hat combos

- Beards and mustaches

If I missed a hairpiece, please let me know in the comments down below.

Suggestions for a Viking seer?

Mon, 23 Oct 2023 05:56:21 +0000

I was wondering if anyone had some suggestions for minifig parts that could be put together for a custom Viking seer/wizard/witch?

I am expanding the Viking Village and thought this character might be an interesting add.

Thanks for any suggestions!