Jump to content


Crawler 9398 4x4 first mod

9398 crawler tyres

10 replies to this topic

#1 cammellostanco

cammellostanco

    Posts: 8
    Joined: 07-December 12
    Member: 33910

Posted 09 December 2012 - 12:54 AM

First post... I just got the awesome 9398... I was at a car dealer, when I stumbled on a Lego Box ... my girlfriend was also charmed and in 15 mins we were both buying again our Lego!! After 20 years !

So ... to the 9398, excellent machine, huge fun to build and watch watch it move its first metres...!

I spent some time yesterday playing in the snow... stock tyres are really NOT OK for off roading!

I got myself four <Hpi Racing Ground Assault>, soooo much better.

Only drawback: they're too wide and , unless you glue them, they stay off the rim on the external side...

#2 clarkdef

clarkdef

    Posts: 229
    Joined: 03-December 12
    Member: 33703
    Country: New Zealand

Posted 09 December 2012 - 01:55 AM

Cool, that set leaves it's self open for modification there is a lot you can do to enhance it. One thing I wish someone could change would be the steering sweep.
This is a test! This is a test!

#3 DLuders

DLuders

  • Technic Technician


    Posts: 5817
    Joined: 17-October 09
    Member: 7868
    Country: USA (WA State)

Posted 09 December 2012 - 02:27 AM

@  cammellostanco:  Welcome to Eurobricks!  :classic:   You may enjoy reading how 3rd-party RC-type tires (in the 1.9" Inside Diameter size) can fit on the 9398's wheels (the 44772 "Wheel 56mm D. x 34mm Technic Racing Medium").  The softer, stickier compound in the RC offroad tires make the 9398 crawl MUCH BETTER -- check out this Eurobricks topic.  Through some experimentation, 1.9" scale tires in the 37mm-48mm widths work best.  :sweet:

Posted Image

Edited by DLuders, 09 December 2012 - 02:27 AM.


#4 VFracingteam

VFracingteam

  • Tugs at the Technic strings


    Posts: 1077
    Joined: 01-December 11
    Member: 22680
    Country: Holland

Posted 09 December 2012 - 04:12 AM

Welcome at Eurobricks Cammellostanco,
I hope you will post some pictures from your first MODs from the 9398 and what Dluders already said you can find much better tires at the 3rd-party topic.
I wish you and your girlfriend a lot of fun with building again :thumbup:

#5 cammellostanco

cammellostanco

    Posts: 8
    Joined: 07-December 12
    Member: 33910

Posted 10 December 2012 - 10:37 AM

From this very first and rough pic, you can see the tyres.
They are really coming out of the rim.... but I did not want to glue them onto the rims...

http://www.brickshel...1209_005022.jpg

Edited by Big Cam, 10 December 2012 - 07:35 PM.
oversized image tags removed


#6 DLuders

DLuders

  • Technic Technician


    Posts: 5817
    Joined: 17-October 09
    Member: 7868
    Country: USA (WA State)

Posted 10 December 2012 - 02:44 PM

@ cammellostanco:  I see that those HPI Racing Ground Assault Tires have 2.2" inside diameter.  In that Eurobricks 3rd Party Tires topic, there was some experimentation with 2.2" RC-type tires and people noticed that 2.2" tires were too loose on the Lego 44772 wheels.  I cannot tell how WIDE those HPI tires are.

Posted Image

On this Eurobricks post, there are several pictures of Hollowpoint Scale Comp 2.2 Tires mounted on the 22969 "Power Puller" wheels:

Posted Image

  RECOMMENDATION: Although third-party, RC-type tires DO FIT on the Lego 22969 Power Puller wheels, the protruding outer flange of the wheel looks a bit odd. Since those wheels are rare and expensive, I recommend using common Lego 44772 wheels for Lego Technic vehicles with fenders. If you have an articulated Lego Rock Crawler (without fenders), then you can select among many of these sizes of tires in the chart below. I'm sure there are other RC tire manufacturers in other countries that would have tires in the ~2" (51mm) width range.

Posted Image

#7 cammellostanco

cammellostanco

    Posts: 8
    Joined: 07-December 12
    Member: 33910

Posted 13 December 2012 - 10:45 PM

WoW I did discover a whole new world! Thank you all... I am keen on reading, unfortunately, getting the pieces is expensive ... :(

#8 cammellostanco

cammellostanco

    Posts: 8
    Joined: 07-December 12
    Member: 33910

Posted 24 December 2012 - 03:03 PM

And, as promised, I have changed to 8:24 the gearing on each wheel plus installed a different (hugher) protection plate on the gears at the front/bottom of the truck.
Here some test with different setups.
This thing is a monster



#9 DLuders

DLuders

  • Technic Technician


    Posts: 5817
    Joined: 17-October 09
    Member: 7868
    Country: USA (WA State)

Posted 24 December 2012 - 03:40 PM

@ cammellostanco:  So (from your video), it seems that your HPI Racing Ground Assault Tires are much better in the snow than the 9398's stock Lego 54120 balloon tires.  It seems that ANY OTHER TIRE than the one in the 9398 set is BETTER.  I sure hope that the winning Crawler entry in the 2012 Lego Technic Competition has different tires (for better performance)....

#10 cammellostanco

cammellostanco

    Posts: 8
    Joined: 07-December 12
    Member: 33910

Posted 24 December 2012 - 04:47 PM

Yes, indeed, the HPI tyres are awesome on any terrain, sooo much softer. I'd love to have bigger rims though!

Videos were SHOT in HD.... I did mess up big time during post production.... sorry

Edited by cammellostanco, 24 December 2012 - 06:25 PM.


#11 VFracingteam

VFracingteam

  • Tugs at the Technic strings


    Posts: 1077
    Joined: 01-December 11
    Member: 22680
    Country: Holland

Posted 24 December 2012 - 07:15 PM

looks great in the snow



Reply to this topic



  


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users