Jump to content


[Recurrent Questions] Find a piece/brick in LDD (Ask here for help)

LDD Find Part Brick Help canopy hinge brick LDD stairs switch 7895

  • Please log in to reply
142 replies to this topic

#1 Calabar

Calabar

    Posts: 2234
    Joined: 11-April 10
    Member: 10232
    Country: Italy

Posted 13 October 2012 - 05:46 PM

In this topic you can ask help if you don't find a piece in LDD.
You can also ask here about any doubt regarding part IDs, duplicate parts and the use of a specific part present in LDD.

Before asking, try the hints listed below.
  • Ensure that the Extended Mode is active
    The extended mode allow access to all the bricks included in LDD in each colour.
    To activate Extended Mode go to: Menu -> View -> Theme -> Extended Mode . . . [Image]
  • Use the Search Field
    The search field is the textfield above the Bricks Palette.  . . . [Image]
    Enter there the ID of the brick you are looking for, or any plausible word that could identify the brick you are looking for.
    Note that the IDs and the descriptions in LDD are the official LEGO ones, and could differ from those you can find consulting other sources such as Bricklink, Peeron, etc...
  • Check the work of other users
    As last resource, check the index of the Official LEGO Sets made in LDD topic looking for the sets that uses the part you need.
    If you find it you can select it and read its Design ID in the bottom bar, then easily find it using the LDD integrated search function.
Other Useful Tools
  • LDD Part Finder (beta)
    Could be you can find useful this little software developed by the user DrFalken.
    You can find more informations here.
  • Bricklink and LDD Manager
    If you know a set that uses the brick you are looking for, you can:
    - Obtain the part ID from Bricklink
    - Use the "Brick Finder" function in LDD Manager to convert the Bricklink ID to the LEGO Element ID
    Otherwise you can use LDD manager function "Search for attributes".
Old related topics:
"Official LEGO Sets made in LDD" topic: Read guidelines before posting!

#2 Calabar

Calabar

    Posts: 2234
    Joined: 11-April 10
    Member: 10232
    Country: Italy

Posted 13 October 2012 - 06:02 PM

Element ID and Design ID
LEGO uses specific IDs to distinguish their bricks.
  • Design ID: 4-5 digit code that identifies a specific Brick, independently from its Material or its Colour.
  • Element ID: 6-7 digit code that identifies a specific Brick in a specific Material or Colour.

Other IDs
Other databases on the web, such as Peeron or Bricklink, uses their own ID system to catalogue LEGO bricks.
Often their ID match with LEGO Design ID, but in some cases IDs are very different.
That usually happens with special bricks or variations of previous released bricks.

Some notes:
  • Peroon IDs: the IDs that start with "x" don't match with LEGO IDs.
  • Bricklilnk IDs: the application LDD manager maps a complete conversion among LEGO IDs and Bricklink IDs.

"Official LEGO Sets made in LDD" topic: Read guidelines before posting!

#3 Calabar

Calabar

    Posts: 2234
    Joined: 11-April 10
    Member: 10232
    Country: Italy

Posted 28 November 2012 - 01:41 PM

[Reserved]
"Official LEGO Sets made in LDD" topic: Read guidelines before posting!

#4 RVFR

RVFR

    Posts: 6
    Joined: 04-December 12
    Member: 33745
    Country: USA

Posted 04 December 2012 - 07:14 AM

Hi all, I'm a new LDD person here.  lol where was this 20 years ago.. that said  I have a hicup here in trying my hands on creating a helicopter I find a canopy #45406 but not the compaion hinge piece? HELP!   What a great sight.

#5 Fugazi

Fugazi

  • Welcome to Eurobricks. How can I help you?


    Posts: 3928
    Joined: 08-January 10
    Member: 8966
    Country: Canada

Posted 04 December 2012 - 11:29 AM

Welcome to Eurobricks RVFR! :classic: We have a dedicated LDD forum so I am moving your question there.
New Member? Read This | Questions? Need Help? Ask Here
Site Guidelines | Eurobricks FAQ | Visual User Guide

#6 Calabar

Calabar

    Posts: 2234
    Joined: 11-April 10
    Member: 10232
    Country: Italy

Posted 04 December 2012 - 11:36 AM

I'll move these posts inside the proper topic, as soon as RVFR will read this answer (to avoid he lost it).

EDIT: I took a look at LDD.
LDD provide the complete assembly (both windscreen and canopy) and call it "45406" (Bricklink ID is 45406c01 instead), f you are in the extended mode, you can use the bucket tool to make the glass transparent.
About the hinge, you can use any compatible one, for example the hinge 44567.
"Official LEGO Sets made in LDD" topic: Read guidelines before posting!

#7 RVFR

RVFR

    Posts: 6
    Joined: 04-December 12
    Member: 33745
    Country: USA

Posted 04 December 2012 - 06:20 PM

What!?  there's a LDD topic line? Newbies I tell ya..  Hmm didn't see that My bad, thanks, LOL now where is it?

#8 RVFR

RVFR

    Posts: 6
    Joined: 04-December 12
    Member: 33745
    Country: USA

Posted 04 December 2012 - 06:42 PM

Awe ha,   found it.   Thanks. which now has me asking a another ?  As I seem to be in a diffent mode in LDD.  The extend version is not highligted as to be able to use this fuction. maybe this is the reason all my bricks are the same color,  which again has me going WT?  I need a control pannel thats painted as such,  but mine are all red (frustrated in the learning curve) I can see this is going to be a fun place ;)  On the matter of the companion hinge piece  the ones (there's two) I believe should work like whats in the real world won't a closer loo shows my the  tabs on the canopy are larger than what would be able to work on the hinge pieces I find.  scratching head here, in the real world these work. any ideas on why this is or the correct piece would be great... now back to the drawing board.

Edited by RVFR, 05 December 2012 - 05:30 AM.


#9 RVFR

RVFR

    Posts: 6
    Joined: 04-December 12
    Member: 33745
    Country: USA

Posted 05 December 2012 - 05:33 AM

awe.. found the answers to some of my gliches,  what a learning curve, love it!   All thouigh I'm still not finding the hinge piece for the canopy  say's it's actully a cockpit  6x4x3 #45406 Grrr. still?

#10 Calabar

Calabar

    Posts: 2234
    Joined: 11-April 10
    Member: 10232
    Country: Italy

Posted 05 December 2012 - 10:01 AM

View PostRVFR, on 05 December 2012 - 05:33 AM, said:

All though I'm still not finding the hinge piece for the canopy say's it's actually a cockpit  6x4x3 #45406 Grrr. still?

Did you read my post above? I suggested you to use the part 44567, but it is not the only one suitable (there are other hinges using the same connector).

In the first posts of this topic, you can find some useful hints to help you to find the parts you need.
Take a look to that.

PS: please pay more attention to typos: for a not native English could be a pain to understand which the right word is. :yoda:
"Official LEGO Sets made in LDD" topic: Read guidelines before posting!

#11 DLuders

DLuders

  • Technic Technician


    Posts: 5817
    Joined: 17-October 09
    Member: 7868
    Country: USA (WA State)

Posted 05 December 2012 - 03:05 PM

@ RVFR:  Yes, when you open LDD Extended Mode, type the part number for that hinge plate (44567) into the blank Search box that appears in the top-left corner of the screen (just to the right of the tiny "LEGO Digital Designer Extended" label).  Press Enter, click on the picture of the modified plate you then see, and the 44567 "Plate 1x2 w/Stub/Vertical" piece will appear.  You can research the desired part in Bricklink, then type that part number into LDD's Search box to find things quickly.  Note that the LDD part descriptions often do not match the Bricklink descriptions, but the Part Numbers are compatible.

#12 RVFR

RVFR

    Posts: 6
    Joined: 04-December 12
    Member: 33745
    Country: USA

Posted 05 December 2012 - 08:00 PM

First,  I'd like to aploigize for my english grammer,  even though it is my lanagage,  I take it for granted (via forum chat edicut )  I'll do better  ;) lets hope.
Back on topic THANKS! guys,  I found it. What is intersting is I had looked at that part, but had it in my mind what I was looking for. and it didn't fit the mold.  Again thank you for your input and asistants,  what a great site. :)  Love this program, it is going to be a lot of fun, all though it does have a large learning curve.
  I did figure out the LDD extened vs. standard,  I didn't notice it was how it loads from the main screen,  (oh brother) I was working in the extented version all a long, :)
Oh, while I'm here, hope it's ok to ask vs looking it up... I do have another situation,  seems as though My Helicopter now is off the grid, like it is hovering, any thoughts to why that might be?  As far as I know I did not move it up, but me being new I might have done a move that brought it up like this. Hmm,  how do I attch my LDD work here to be seen?

#13 DLuders

DLuders

  • Technic Technician


    Posts: 5817
    Joined: 17-October 09
    Member: 7868
    Country: USA (WA State)

Posted 06 December 2012 - 12:50 AM

@ RVFR:  Before you "Reply" to this topic, you should press the "More Reply Options" at the bottom-right corner of the "Reply" window.  You will then see a way to "Attach Files" at the lower-left corner of the screen.  "Browse" to your LDD .lxf file, and then "Attach This File".  Everyone on Eurobricks gets a total allotment of only 150kB of "Attachments", but LDD .lxf files are usually smaller than 150kB.  Once you post your file, people on this forum may be able to determine why your LDD helicopter is "hovering".  :classic:

#14 Calabar

Calabar

    Posts: 2234
    Joined: 11-April 10
    Member: 10232
    Country: Italy

Posted 06 December 2012 - 02:04 AM

Attachment function of the forum is good to fast share files temporarily.
If you want to permanently share your files, you should use an esternal file hosting services.
The most used there to share LEGO images and .lxf files is brickshelf. You have to create a free account before using it, and once upload you files, you can directly link that here in the forum (direct link images and files, and not galleries, because galleries are moderated and it may take time before become accessible).
"Official LEGO Sets made in LDD" topic: Read guidelines before posting!

#15 RVFR

RVFR

    Posts: 6
    Joined: 04-December 12
    Member: 33745
    Country: USA

Posted 06 December 2012 - 04:17 AM

You guys are Great Thanks. I did grab the whole model and brought it down, then leveled it off,  but you can still tell it's crocked.... Lousy landing I guess.  Fingers cross you can see this.  Sounds like then a trip to of to Brickshelf is in order.  ..Attached File  500H.lxf   29.19K   6 downloads

#16 ColinZeal

ColinZeal

    Posts: 1
    Joined: 25-December 12
    Member: 34849

Posted 25 December 2012 - 10:03 PM

Hello,

First of all, excuse me for opening a new topic for this little problem of mine, but I couldn't find a proper topic. :)

Hopefully you can help me, as I think my question can be answered easily by old-time users of LDD 4.3. (or older), but i'm quite new. I was just wondering if the below spiral staircase can be found (if so, where...) in LDD as I could not trace it so far (to my great surprise...).

http://i.ebayimg.com...P3tqmQ~~_35.JPG

Thank you very much in advance! :)

#17 legolijntje

legolijntje

    Posts: 2106
    Joined: 06-June 10
    Member: 11214
    Country: The Netherlands

Posted 25 December 2012 - 10:23 PM

I replaced your question in the correct topic :classic:

I can't help you with the part, I'm not really a ldd person, more LDraw :wink:

#18 AndyC

AndyC

    Posts: 1238
    Joined: 23-June 09
    Member: 6485

Posted 26 December 2012 - 02:22 PM

The spiral staircase part is unfortunately not in LDD at the moment. I did a (very rough) replacement for some of the Paradisa sets in the Official Sets in LDD topic, you could swipe the copied part out of one of them, such as Poolside Paradise: https://dl.dropbox.c...radise.lxf?dl=1
Posted Image

#19 dvsntt

dvsntt

    Posts: 304
    Joined: 28-December 12
    Member: 35036
    Country: USA

Posted 07 February 2013 - 09:15 PM

I cannot seem to locate part 4319 (Hinge Bar 8L with 3 Fingers and Open End Stud) in LDD. I've searched for hinge parts and bar parts and cannot locate it. Is it simple not there?
My Lego Ideas Project: The Twist and Whirl Ride - A fully motorized minifig scale amusement park ride. Click below to support.
Posted ImagePosted ImagePosted Image

#20 Alcom1

Alcom1

    Posts: 43
    Joined: 27-January 13
    Member: 38080

Posted 07 February 2013 - 09:33 PM

It is simply not there, as is its 2880 relative.
Posted ImagePosted Image

#21 dvsntt

dvsntt

    Posts: 304
    Joined: 28-December 12
    Member: 35036
    Country: USA

Posted 07 February 2013 - 09:35 PM

Bummer. Thank you very much.
My Lego Ideas Project: The Twist and Whirl Ride - A fully motorized minifig scale amusement park ride. Click below to support.
Posted ImagePosted ImagePosted Image

#22 legolijntje

legolijntje

    Posts: 2106
    Joined: 06-June 10
    Member: 11214
    Country: The Netherlands

Posted 07 February 2013 - 09:50 PM

I've merged this in the correct topic :classic:

#23 dvsntt

dvsntt

    Posts: 304
    Joined: 28-December 12
    Member: 35036
    Country: USA

Posted 09 February 2013 - 12:46 PM

thank you, I was not aware of this thread. I'll be certain to post further inquiries here.
My Lego Ideas Project: The Twist and Whirl Ride - A fully motorized minifig scale amusement park ride. Click below to support.
Posted ImagePosted ImagePosted Image

#24 dvsntt

dvsntt

    Posts: 304
    Joined: 28-December 12
    Member: 35036
    Country: USA

Posted 14 February 2013 - 06:02 PM

I am making a building in LDD and the arches I used over the windows (92950) are not available in the color I am using (dark red). However a similiar part (3455) is aviolable, but it cannot fit the part (93273) beneath it to complete the form. Can someone suggest a method to fill in this space, or another building method to get the resutls I want. Here is an example of the probem I am encountering:

Posted Image
My Lego Ideas Project: The Twist and Whirl Ride - A fully motorized minifig scale amusement park ride. Click below to support.
Posted ImagePosted ImagePosted Image

#25 DLuders

DLuders

  • Technic Technician


    Posts: 5817
    Joined: 17-October 09
    Member: 7868
    Country: USA (WA State)

Posted 15 February 2013 - 02:18 AM

@ dvsntt:  So that I can visualize the problem, I've restated the situation below.  The 92950 "Brick, Arch 1 x 6 Raised Arch" (below) does not come in Dark Red, but it DOES come in Red.  Would you consider spray-painting the part?

Posted Image


The 3455 "Brick, Arch 1 x 6" part DOES come in Dark Red, but you cannot fit the Dark Red 93273 "Slope, Curved 4 x 1 Double No Studs" part underneath of it:

Posted Image    Posted Image



Should you consider using the 62361 "Vehicle, Mudguard 1 1/2 x 6 x 1 with Arch" part?  It does not come in Dark Red, but it does come in Red and could be spraypainted.  It has an eyebrow effect over the window:

Posted Image





Also tagged with one or more of these keywords: LDD, Find, Part, Brick, Help, canopy hinge, brick, LDD stairs, switch, 7895

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users