Jump to content


WIP City Hospital


  • Please log in to reply
15 replies to this topic

#1 jonwil

jonwil

    Posts: 3699
    Joined: 12-January 07
    Member: 1239

Posted 28 February 2012 - 03:49 PM

Here are some pictures of what I have built so far:
http://www.cncmods.n...s/hospital1.JPG
http://www.cncmods.n...s/hospital2.JPG
http://www.cncmods.n...s/hospital3.JPG
http://www.cncmods.n...s/hospital4.JPG

Looking at the overview image, the ambulance bay is off to one side with the ambulance entrance just visible at the bottom of the picture (you can just see the red window frames)
The small item at the bottom is the elevator
Next to the elevator is the trauma room and on the other side in the small space will be something I haven't yet decided on (maybe shelves full of medical gear?)
The space next to the trauma room is where the normal ER beds will go.
In the space near the main doors will be the waiting area where people wait to be seen and facing the main doors and in front of the large support column will be the admin/admit desk.

On the second floor will be a large OR for my Series 6 surgeons to perform operations in, a radiology room (CT scanner/X-Ray/etc), main ward and doctors lounge.

On the third floor (which will only cover part of the structure) there will be a plant room (backup generator etc) and a med lab for doing testing with a helipad taking up the rest of the second floor roof.

I will be using white for the walls and windows with a bunch of tan to be used because I dont have enough white for the job. Roof/floor colors will be whatever color I have enough parts in (first floor roof is already build and is part black and part light bley).

Wish the 8 x 16 and 16 x 16 plates were easier to obtain :(

I do plan to build an ambulance and most likely a helicopter to go with this hospital.

Anyone with feedback on this, please feel free to let me know.

#2 lightningtiger

lightningtiger

  • Gungans taste like chicken


    Posts: 21406
    Joined: 28-October 09
    Member: 7997
    Country: Australia

Posted 28 February 2012 - 10:22 PM

Not bad so far 'jonwil', your problem with the ceiling is quite simple.....white plates to fit between the walls and the next floor are plates on top of those ceiling ones.
I look forward to your progress.....Brick On ! :classic:

#3 JackJonespaw

JackJonespaw

  • Doesn't like cherry talk


    Posts: 2743
    Joined: 12-June 11
    Member: 18405
    Country: U.S.A.

Posted 28 February 2012 - 11:17 PM

Very nice! This is quite an expedition you are embarking on!

My Flickr

I've done a lot of Mafia games over the years. Somehow, I haven't improved at all.

Scott. Great Scott, if you will.

Working on...another...Mafia...story...


#4 jonwil

jonwil

    Posts: 3699
    Joined: 12-January 07
    Member: 1239

Posted 02 March 2012 - 01:41 PM

The structure is now pretty much finished, now I need to do all the detailing and interior.
Some more photos:
Drug locker (on the ground floor near the elevator)
http://www.cncmods.n...s/hospital5.JPG
http://www.cncmods.n...s/hospital6.JPG

Second floor overview
http://www.cncmods.n...s/hospital7.JPG

CT scanner (portable x-ray machine will be present in the ER)
http://www.cncmods.n...s/hopsital8.JPG

Operating Room (with sink to scrub up before operations)
http://www.cncmods.n...s/hospital9.JPG

Remainder of second floor
http://www.cncmods.n.../hospital10.JPG
The room next to the elevator is the office of the hospital administrator
The 2 big areas are the main wards (some beds of which will be ICU beds)

Top level
http://www.cncmods.n.../hospital11.JPG

Top floor interior
http://www.cncmods.n.../hospital12.JPG
The area at the bottom is the medical lab
The small area is the medical stores
The large area at the top is the plant room (which will feature the backup generator for the hospital and the hospital waste incinerator)

Helipad
http://www.cncmods.n.../hospital13.JPG

Any comments (or suggestions of what equipment/detailing/etc should go into the various rooms) would be appreciated

#5 lightningtiger

lightningtiger

  • Gungans taste like chicken


    Posts: 21406
    Joined: 28-October 09
    Member: 7997
    Country: Australia

Posted 02 March 2012 - 01:52 PM

Looking good 'jonwil', I see though there is still a long way to go....so keep going and Brick On ! :classic:

#6 EM4CZ

EM4CZ

    Posts: 228
    Joined: 24-January 10
    Member: 9256
    Country: Czech Republic

Posted 02 March 2012 - 03:39 PM

At the heliport would be larger elevator, if there are going to the emergency room with a stretcher.

In a standard elevator in the hospital must enter a hospital bed with a patient.

#7 jonwil

jonwil

    Posts: 3699
    Joined: 12-January 07
    Member: 1239

Posted 02 March 2012 - 04:25 PM

yeah I know the elevator should be larger but I ran out of room in the lower floors to make it any bigger :)
Just pretend that its actually large enough to take the patient from the helipad to the ER :)

Edited by jonwil, 02 March 2012 - 04:25 PM.


#8 EM4CZ

EM4CZ

    Posts: 228
    Joined: 24-January 10
    Member: 9256
    Country: Czech Republic

Posted 02 March 2012 - 04:42 PM

second option is to relocate the helipad on the ground and build another room

#9 medib

medib

  • Finally Found the Other Half


    Posts: 379
    Joined: 09-November 04
    Member: 95
    Country: Canada

Posted 02 March 2012 - 06:37 PM

So far so good.

In my opinion, either move the elevator over near the rest of the top floor (giving you more room for manouverabilty for those
air ambulances) or move the helipad to the ground... or do both.... or do neither, its yours afterall.
Posted Image Would do anything for the other half!

Posted Image

#10 gotoAndLego

gotoAndLego

    Posts: 1194
    Joined: 09-January 10
    Member: 8984
    Country: USA

Posted 02 March 2012 - 06:41 PM

Having walls around a helipad is a really bad idea. Put it on the roof..
-----
Please support my Lego Cuusoo projects:

Posted Image Posted Image Posted Image Posted Image

FLICKr

#11 EM4CZ

EM4CZ

    Posts: 228
    Joined: 24-January 10
    Member: 9256
    Country: Czech Republic

Posted 02 March 2012 - 08:02 PM

your helipad is too small for EMS Helicopter

Posted Image

from australian regulations for hospitals
http://www.capital.d...age.aspx?ID=340
the primary characteristics of hospital helipads.
--------------------------------------------------
Landing and Lift-Off Area (LLA)
Final Approach and Take-Off Area (FATO)

Posted Image

The specific marking for helipads at hospital sites is a red H on a white background.
Posted Image

emergency Helipad in USA
Posted Image

#12 woolie

woolie

  • 100% Natural Maersk


    Posts: 84
    Joined: 18-January 12
    Member: 24465
    Country: TX

Posted 02 March 2012 - 09:32 PM

When my desk was at a different window, it looked out over the helipad of a major trauma hospital. The helicopters would come and go all day long. As in your design, the helipad is on the roof.

#13 Ricecracker

Ricecracker

  • Stormed Out


    Posts: 4681
    Joined: 25-November 07
    Member: 2221
    Country: Canada

Posted 02 March 2012 - 10:13 PM

View PostEM4CZ, on 02 March 2012 - 08:02 PM, said:

your helipad is too small for EMS Helicopter
There's no need to be rude. Constructive criticism is welcomed, but if you don't have anything nice to say, don't say it. That applies to everything, not just this topic.

#14 Vindicare

Vindicare

    Posts: 4751
    Joined: 12-August 10
    Member: 12542
    Country: USA(California)

Posted 03 March 2012 - 01:32 AM

You certainly have a great start. It looks like you're going for realism and accuracy, you really should rethink the elevator. It looks great with all the rooms and everything, but the elevator is a vital part of the hospital. Nobody would be able to get to the OR if they can't get the gurney in there. Evrything else is looking really good. I look forward to seeing this monster in it's final beauty.
Clone Army-147 & counting...

#15 jonwil

jonwil

    Posts: 3699
    Joined: 12-January 07
    Member: 1239

Posted 03 March 2012 - 02:27 AM

Thanks for all the great comments. The only reason I didn't make the elevator larger is that I didn't have the room to do it. And I wont be moving the elevator either because I dont have the room to do that either.
As for the helipad, I intend to re-do that with a red H (smaller than the current yellow H) and white cross like in all the photos I see on Google.

#16 BrickBox

BrickBox

    Posts: 112
    Joined: 27-January 09
    Member: 5129
    Country: Germany

Posted 03 March 2012 - 01:21 PM

I would be interested in an outside shot of the whole building. Will it be just plain walls or are you planning on doing some more 'elaborate' facade and exterior details?
Looking forward to all the apparatus and furniture you'll come up with!




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users