Starting the design of Queen Anne's Revenge
#51
Posted 07 January 2012 - 09:39 PM
@ Yawgmoth. The lanterns on the back of the poopdeck, just before the stern lantern, have rings on their base, where the black skeleton arms are grabbing on to. Alternatively, take a look at the wheel from this MOC; www.eurobricks.com/forum/index.php?showtopic=64390
#52
Posted 07 January 2012 - 09:55 PM
Captain Blackbeard, on 07 January 2012 - 09:39 PM, said:
@ Yawgmoth. The lanterns on the back of the poopdeck, just before the stern lantern, have rings on their base, where the black skeleton arms are grabbing on to. Alternatively, take a look at the wheel from this MOC; www.eurobricks.com/forum/index.php?showtopic=64390
Yeap, hehe, finally after re reading your comment I got what you meant :P
I'm gonna try building it, and then install on the poopdeck, but for now I'm still on details on deck.
Btw, now that we are on it, any suggestions on what to put on decks? :P there's some few space left that has nothing on it, seems kind of empty...Imma post an image in a minute
Here they are:


Nothing out of common..kind of need some ideas hehe..
Edited by Yawgmoth, 07 January 2012 - 09:59 PM.
#53
Posted 07 January 2012 - 10:03 PM

PS3 ID: Jamako53 (I havez teh Blak Opz!)
#54
Posted 07 January 2012 - 10:10 PM
Napoleon53, on 07 January 2012 - 10:03 PM, said:
I did a couple on the bow, inside the gundeck..that function as the flamethrowers,.. but other that those, haven't made em yet, for 1 reason mainly, QAR shown on the movie doesnt have 'em hehe
Here's a picture on what i was basing my desing on decks:

Question is: Should I?
Edited by Yawgmoth, 07 January 2012 - 10:10 PM.
#55
Posted 07 January 2012 - 10:57 PM
#56
Posted 07 January 2012 - 11:17 PM
Captain Blackbeard, on 07 January 2012 - 10:57 PM, said:
For some reason i love this ship having that many lanterns, and i try to put as many as i can, without looking too full of 'em.
Rope I'll definetly be putting some here and there, but LDD it's not the place to play around with ropes, and my PC is lagging as hell right now hehe, on the real life model, there'd be many other things, this is more or less a guide for me to know what and how much to buy
I included couple more cannons on decks, I didn't wanted to, because the narrow space left, but it looked kind of empty without 'em, so I modified a little to set some space for them:

Also, I started the main mast already, after some measuring on proportions, got some height somehow accurate:

Also, some neat details ontop of mast:

I tried the custom steering wheel, but it's impossible on LDD (The hands of the minifigs are attached to the body as one whole piece), another thing to remember for the real model.
#57
Posted 07 January 2012 - 11:31 PM
Mainmast looks nice, extra cannons are good too, seeing as when Blackbeard first got QAR, he was unhappy with its complement of 26 cannons, and upgraded it to 40 cannons.
#58
Posted 07 January 2012 - 11:38 PM
Captain Blackbeard, on 07 January 2012 - 11:31 PM, said:
Mainmast looks nice, extra cannons are good too, seeing as when Blackbeard first got QAR, he was unhappy with its complement of 26 cannons, and upgraded it to 40 cannons.
Yeah! I read that too, but here we are playing only with 26, for space reasons, there's just no way i can install as many as 40, maybe if I had designed a better gundeck
Thanks for your comments :D hope I don't dissapoint you, if so, make as many suggestions as needed, so I can improve the design :)
#59
Posted 08 January 2012 - 12:05 AM
#60
Posted 08 January 2012 - 01:02 AM
Captain Blackbeard, on 08 January 2012 - 12:05 AM, said:
There's several ways to get to lowerdecks, and to cap's cabin and even lower..but in LDD its kind of slow, hopefully I'll be designing a better way, just as everybody does, dividing the ship in sections, both to store it better in case i gotta move it or when I'm not displayig it, or to show off the interiors.
Those cannons that take too much space were the ones I recently installed, I know they look like an obstacle rather than an utility, but they are necessary :/
Edited by Yawgmoth, 08 January 2012 - 01:02 AM.
#61
Posted 08 January 2012 - 01:17 AM
I need to mod my QAR too, but yours will dwarf mine
Keep up the good work!
#62
Posted 08 January 2012 - 01:40 AM
Lance, on 08 January 2012 - 01:17 AM, said:
I need to mod my QAR too, but yours will dwarf mine
Keep up the good work!
Thanks
Last update for today:





Night~
Edited by Yawgmoth, 08 January 2012 - 09:21 PM.
#63
Posted 08 January 2012 - 09:04 PM
I hope see it in the flesh!
#64
Posted 08 January 2012 - 09:06 PM
#65
Posted 08 January 2012 - 09:12 PM

PS3 ID: Jamako53 (I havez teh Blak Opz!)
#66
Posted 08 January 2012 - 09:41 PM
Here's some little details left to be done:
Added the golden cup, it really took some thinking on how to install it on the figure hand, in real life it would be just to grab it with the "fingers" but in LDD; it's a little more complex, everything must be attached to something..
Anyway, i managed to do it, here's the pic:

Little more details on bow decks, some cutlass for the crew :P

Added couple more lanterns on the sides of the ship, 4 in total for each side, adds a nice touch if seen from a far :P

Some more lanterns on decks, these ones I liked how they looked, shame I couldn't install "light" on them:

Here's my lantern palette btw:

Some wider places in the masts:

Also added a little dark red to represent the sails :P

Some images showing the whole ship:


Now i can start working on the interiors :D
#67
Posted 08 January 2012 - 10:34 PM
For the lower decks, you should add some hammocks made from nets. They'd look pretty funny with a bunch of minifigs lying in them.
#68
Posted 08 January 2012 - 10:47 PM
Captain Blackbeard, on 08 January 2012 - 10:34 PM, said:
For the lower decks, you should add some hammocks made from nets. They'd look pretty funny with a bunch of minifigs lying in them.
I'm afraid there's not enough space to place those, I could manage and do something thougth.
Sails are gonna be there, custom because they ended up being larger than I expected hehe, but there will definetly be wearing some beatiful sails :)
#69
Posted 08 January 2012 - 10:54 PM
#70
Posted 08 January 2012 - 10:57 PM
Captain Blackbeard, on 08 January 2012 - 10:54 PM, said:
Yeah, I got that in mind.. I made it in a hurry, hehe.. it must be kind of smaller, to match the proportions a little better :P
Also gotta improve its articulations too, looks too static as it is right now hehe,
#71
Posted 09 January 2012 - 05:23 AM
Whole view of what i made today:

And some detailed images of what there would be indoors:




Got several ideas on internet, brickshelf mostly, other stuff are homemade, overall i tried to give my own touch to everything
Tomorrow I'll be installing what fit the most :P
PS: Blackbeard, is your desk cluttered enought for your taste? hehe, I took inspiration on these images:


Also, I included your bookshelf too ^_^
Edited by Yawgmoth, 09 January 2012 - 05:29 AM.
#72
Posted 09 January 2012 - 05:43 AM
One question: will all the parts you've used on this ship be available in the same colors when it's time to order them?

PS3 ID: Jamako53 (I havez teh Blak Opz!)
#73
Posted 09 January 2012 - 05:45 AM
Napoleon53, on 09 January 2012 - 05:43 AM, said:
One question: will all the parts you've used on this ship be available in the same colors when it's time to order them?
Guess I'll be needing to change a bit some parts, due to the non existance of certain bricks in an specific colour, but as you can see it right now is how I'm gonna try to leave it, no major changes on the color scheme unless strictly needed.
#74
Posted 09 January 2012 - 05:55 AM

PS3 ID: Jamako53 (I havez teh Blak Opz!)
#75
Posted 09 January 2012 - 06:15 AM
As for pieces out of color; Paint 'em! Use an industrial plastic type paint, or maybe spray paint, and you can have any color you want! Usually best if you start with a brick that's close to the wanted color or white.
Edited by Captain Blackbeard, 10 January 2012 - 03:04 AM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users










