Jump to content


REVIEW: Sort and Store


4 replies to this topic

#1 SilentMode

SilentMode

  • A bronzie that does not endorse whipping


    Posts: 1352
    Joined: 13-May 10
    Member: 10650
    Country: UK

Posted 18 September 2011 - 06:31 PM

Posted Image
I don't think there's anywhere else more suited for this particular review, but feel free to move the thread if there is.

Posted Image

Sort and Store
Set 81010
Release year: 2010
# of pieces: 5
# of minifigs: 0
RRP: GBP 34.99 / USD 39.99

I have a rather large collection of parts, all mixed up, and I wanted some way of making sorting a lot easier. It's somewhat therapeutic - but absolutely no fun - spending hours sorting the small parts from slightly larger ones.

I bought this Sort and Store - a storage item that also "sorts" Lego parts into big, medium-sized and small parts - to see if it would be of any help. From the outset I wouldn't have expected it to do any colour sorting, but I thought it might be useful for separating all those studs from tiles, for example.

Although the Sort and Store is listed on the US Lego shop site, it isn't on the UK site, nor have I ever seen it in a Lego store over here. The only place I know that sells them is John Lewis.

Anyway, here's the back of the box:

Posted Image

And one of the sides (don't worry, both sides have the same information on them):

Posted Image

The plastic corner insert at the front basically has the same info on it.

Posted Image

Inside the box is a basic instruction pamphlet describing how to use this contraption.

Posted ImagePosted Image

This thing is HUGE. To give a general impression of how big this thing is, I've asked a couple of volunteers to stand next to it. I guess it stands to reason that it's large, especially if it's going to house and sort a large number of parts.
(Volunteers may have been reimbursed for taking part in this review.)

Posted Image

The head has a carry handle, but I find it hard to lift because of the small indent.

Posted Image

Both sides of the head have clamps for keeping everything intact.

Posted Image

And in case you're wondering if this is a genuine product...

Posted Image
(What's my name?)

Posted Image

Chilled monkey brain...  *oh2* :cry_sad:

But seriously: the stud eventually lifts to reveal an opening in the head, with which you fill the Sort and Store with your various bricks and things.

A little peek inside the head shows there are no brains to speak of, but a series of lattices to do the sorting.

Posted Image

To save a bit of time I've separated all the parts that make up the Sort and Store, all displayed here: two sorting trays with lattices make up the back of the head, with the rest of the head catching the tinier parts.

Posted Image

Here's the back of the head without the sorting trays.

Posted Image

The test
To test the sorting capabilities of the Sort and Store, I filled it with the contents of three different containers of random parts.

Posted Image

^ The first container mostly comprised of items from various Bricklink orders that people were generous enough to trade with me.

Posted Image

^ The second contained a bunch of parts obtained from grab bags at the Westfield (Shepherd's Bush) Lego store. I was particularly lucky this month as the bags contained a number of useful and unusual elements, including from Alien Conquest and the Fallingwater set.</brag>

Posted Image

^ The third was a random assortment of small parts, all obtained from the PAB wall at Liverpool One's Lego store.

So after inserting the contents into the Sort and Store, and giving the whole thing a good shake for several seconds, here's what happened.

The top tray managed to retain the larger pieces (which, given the size of the holes, was no surprise), and a few of the wider elements. You can also see some small elements that got trapped next to or inside some large ones.

Posted Image

The middle tray was where things got a little concerning. Some of the 2x4 plates and 2x2 bricks made it through to here, but this tray didn't seem to hold much at all!

Posted Image

And the bottom of the Sort and Store was basically full; quite a few elements, including some 1x3 bricks and the flower brick, were ones I didn't expect to find there.

Posted Image

The verdict
This is obviously aimed at kids, who probably wouldn't have nearly as many elements as an AFOL in their collection. It's a big enough container to be effectively used as a storage solution, and it's a great novelty item. As a sorting solution it's let down by the holes in the middle tray being a bit too big, as well as (in this case) not enough space at the bottom for the parts that do get down there.

One thing that would have helped make this an easier purchase is the inclusion of parts: perhaps a minifigure or just a handful of bricks to test the sorting with. As it stands there's no real incentive to buy one of these things, other than as a fancy Lego-themed toy box to show one's friends just how much into Lego they are - especially at the RRP.

If I had to give some kind of score out of thin air, I'd say it's worth a 4/10.


Posted Image
"Who ate all the dim sum?!"

Edited by Rufus, 09 October 2011 - 02:14 PM.
Indexed

the infamous SilentMode
crowdfunding yet again for Project Swapfig - ends November 16 2013.
SilentMode.tv | Project Swapfig | @SilentMode1 | Brick Owl store | Flickr
"Almost everything you do will seem insignificant, but it is important that you do it." - Mahatma Gandhi

#2 Darkdragon

Darkdragon

  • Destroyed Dreams of Super-Santa


    Posts: 5109
    Joined: 22-November 10
    Member: 14331
    Country: USA

Posted 18 September 2011 - 06:43 PM

I have this product. Your review has covered a lot of info about it, and I think it's great because so many people I come across online have never heard of this or don't know what it is when they saw it.

One thing I noticed with the one I have is that the clips on the sides come off.  They don't break, but the little hinge that holds them onto the top portion of the head sometimes will pop off when I go to lock it. It really makes me worry about having this loaded up with parts and carrying it around. Can you imagine the horror for a child who put his whole collection in this to go to grandma's house and as he was walking up the driveway the top came off and everything flew all over the ground?  :cry_sad:

It does work as a quick sorter, somewhat, as you said. I mostly use it to toss parts in that I'm currently working with for a project to keep them together and yet semi-sorted. It is very impressive sitting on to top of a shelf because it's a giant minifig head.  :laugh:

#3 SilentMode

SilentMode

  • A bronzie that does not endorse whipping


    Posts: 1352
    Joined: 13-May 10
    Member: 10650
    Country: UK

Posted 18 September 2011 - 06:57 PM

View Postdarkdragon, on 18 September 2011 - 06:43 PM, said:

I mostly use it to toss parts in that I'm currently working with for a project to keep them together and yet semi-sorted.
That's a good idea, until now I've just had all the parts in a single box. Thanks for the comment!

If anyone wanted to make a cult-based MOC, this or the other storage boxes would be very good. I was going to do one but I didn't have the audacity.
the infamous SilentMode
crowdfunding yet again for Project Swapfig - ends November 16 2013.
SilentMode.tv | Project Swapfig | @SilentMode1 | Brick Owl store | Flickr
"Almost everything you do will seem insignificant, but it is important that you do it." - Mahatma Gandhi

#4 Rufus

Rufus

  • Schnell! Schnell! Kartoffelkopf!


    Posts: 5037
    Joined: 15-July 09
    Member: 6705
    Country: England

Posted 18 September 2011 - 09:30 PM

Thanks for this review, SilentMode!  A very intelligent and informative review :wub:  The pictures with the parts inside also help to give an idea of the size of this thing - it's huge!

If only they'd invent something which would sort by colour :laugh:

#5 WhiteFang

WhiteFang

  • Beep beep!


    Posts: 15785
    Joined: 31-December 07
    Member: 2351
    Country: Singapore

Posted 19 September 2011 - 02:30 AM

View PostRufus, on 18 September 2011 - 09:30 PM, said:

The pictures with the parts inside also help to give an idea of the size of this thing - it's huge!
I agreed! Thank you SlientMode for sharing such a comprehensive review coverage on this storage item. I think it's pretty neat to have your bricks stored in these containers.

My BrickLink Store // Sign up for Reviewers Academy // Trains & Town Reviews // Black Knights Kingdom (EBRP) // Watch out EB News!

Click here to find out more about WhiteFang


New Member? Read This | Questions? Need Help? Ask Here

Site Guidelines | Eurobricks FAQ | Visual User Guide


My name is Wilhalm Bloodaxe and I am back to be part of the Ragnarök Now Redux.

Lord Kenneth Valise, Level 1 Knight, 28yrs old human
Power: 4 Health: 10/10 Gold: 10
Inventory: One potion, a Greatsword (WP: 3) and a Shield (SP: 2)




Reply to this topic



  


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users