Jump to content


Post LDD Contest Entries here!


  • This topic is locked This topic is locked
8 replies to this topic

#1 Superkalle

Superkalle

    Posts: 5365
    Joined: 21-December 08
    Member: 4755
    Country: Sweden

Posted 04 June 2010 - 07:20 PM

Posted Image

This is the entry topic for the LDD Contest for LEGO Train Tech MOCs. Post your creations here only.
To read about the contest and rules for entries click here

To discuss the various entries, use this discussion topic in the LDD forum.

IMPORTANT To all contestants:
1) If you are entering the LDD Only class you MUST also link to the LXF-file, or you will be disqualified.
2) Make sure you use the [img][/img]-tags (or click on "Insert Image"-button above) so images show up in the post, not like links, but like pictures.
4) Observe - Max 3 pictures that are max 800 pixels in size each.

If you do not follow the rules, you will be disqualified, so please read the rules BEFORE you post!
Eurobricks Digital Design Forum - for all your LDD and Ldraw cravings

#2 Chip200

Chip200

    Posts: 6
    Joined: 07-June 10
    Member: 11293

Posted 08 June 2010 - 12:50 AM

I can't upload a picture here :hmpf_bad: , so here are links:
http://www.flickr.co...200/4680613508/
http://www.flickr.co...200/4680613484/
http://www.flickr.co...200/4679981561/


EDIT: The following message has been placed here by the contest organizer.

This entry has been DISQUALIFIED for the following reasons:
1) Dupliate entries - You are only allowed to enter one entry per class in the LDD contest. You have now entered the same class in both Train and one in Town.
2) Missing LXF (and did not bother to read rules where information can be found how to do this)
3) Have not fixed the above, despite several reminders in this topic

#3 Matt Dawson

Matt Dawson

    Posts: 309
    Joined: 12-August 09
    Member: 7007
    Country: United Kingdom

Posted 14 June 2010 - 06:38 PM

Here's my entry, a modern take on the Emerald Night coach.

Posted Image
Posted Image
Items to note:
> Opening doors. Almost exact copy of EN coach doors.
> Bogies. Modified EN design, 9 studs long to accomodate suspension, to try and alleviate the bogie "overhang" due to the steps.

Link to file

Edited by Matt Dawson, 04 July 2010 - 12:37 PM.

Posted Image
Want to see more photos? See my Flikr!
Posted Image

#4 Catanas

Catanas

  • Comicly reviewing cat


    Posts: 174
    Joined: 23-April 10
    Member: 10387
    Country: England

Posted 17 June 2010 - 03:23 AM

I thought I'd give this a go even though I havn't posted much!
My second attempt on LDD and am fairly pleased with the result.

I'd always been a little interested in the travelling post office so I decided to revolve the idea around a mail train in a similar style to a regular lego set.

The first car is empty in case a power functions battery and IR wants to be installed. The first middle car has a few desks, and mail holders for the sorters. The second middle car has sliding doors that allow a 4x3 crate to be slid in filled with mail and sorted by a grumpy postal worker. The rear car has a small compartment for packages and the like. It also comes with a platform, small postal van complete with an assortment of crates, parcels and letters and a few postal workers to compliment them! Theres a few places on the model I'd like to put some of the official mail stickers, but thats not possible with LDD, so just imagine.
There are 1682 pieces.

Posted Image

Posted Image

Posted Image

http://www.brickshel...ail_express.lxf

Edited by Catanas, 15 July 2010 - 10:02 PM.


#5 Chromeknight

Chromeknight

  • Heyo!


    Posts: 1874
    Joined: 14-May 09
    Member: 6074
    Country: Australia

Posted 18 June 2010 - 01:35 AM

My class 8 British Shunter.
The wheels can be swapped for a motor. I'm still trying to work out fitting in a pf battery box and receiver.
For coupling, you'll need an older magnet and holder , not one of the new one piece thingys.
I've tried to capture the greebly detail on the sides. Ideally it'd have wasp striping on the back, but I think it looks ok as is.

On with the three pictures!
Front quarter view
Posted Image
Rear above view
Posted Image
Overhead front view
Posted Image

and lxf file in gallery when moderated

Edited by Chromeknight, 18 June 2010 - 01:36 AM.

Nerwen Calmcacil, Elven Paladin, is paying debts in Heroica the RPG!
Posted Image


#6 mrblue

mrblue

  • Hi, my name is Mr. Blue and I'm an EB Addict


    Posts: 183
    Joined: 20-November 08
    Member: 4429
    Country: thailand

Posted 14 July 2010 - 06:15 PM

HELLO to everyone!
this is my entry for the LDD + real bricks
it's a train station based on one I have seen don't know where on the net that I really liked.
mostly that I don't like about some lego buildings is that there is a lack of interiors and floors are not "really" connected, so in this train station you can find:
a ticket counter with queue lines and accessible place for the operators and a small waiting area.
a bar with coffee machine and draft beer plus other drinks on the shelves and various other facilities, like sink and under storage and also a small terrace for the clients to wait and drink.
on the upper floor, accessible from a stair on the back, you can find a small (hotel) room for those who have to wait a little longer. the building on the right, is a storage area accessible from both sides with ramps.
roofs and first floor can be removed for easier access.
total bricks count: 2100 (excluding the 4 rail tracks added on the real bricks photo)
enough with description, now photos (3 LDD + 2 real bricks)

Posted Image

Posted Image

Posted Image

Posted Image

Posted Image

LDD file can be found HERE
I like to share my LDD files, I think they can help to see other people techniques and give ideas for a better build!

thank you for watching, and good luck to everyone.
have a nice lego day!

#7 Odyssey

Odyssey

    Posts: 60
    Joined: 17-April 10
    Member: 10306

Posted 15 July 2010 - 08:43 PM

Hi everyone!

My entry for the category LDD + real bricks is a MOC of an open-air bar carriage, a cross-over of an observation carriage and open-air carriages like those used on trains in New Zealand (most likely also somewhere else *g*). I built the carriage as an addition to the Metroliner train and it therefore uses the same size and basic frame as the Metroliner passenger carriage. The livery was inspired by German Railway InterCity carriages. The idea was to show a carriage that looks like it might have been built by the same company as the other Metroliner carriages but was later bought by another railway operator, repainted and rebuilt into an open-air bar carriage and now included in the Metroliner for luxury cross-border services (as in European cross-border InterCity trains where you'll often see rolling stock from different companies).

The air-suspended carriage is equipped with luxurious seating for three minifigs in the open-air part of the carriage, large windows and a big bar serving drinks and snacks.


LDD screenshots (click to open in flickr:)
Posted Image
Posted Image
Posted Image


Built in real bricks:
Posted Image
Posted Image


And here's the LDD file

Edited by Odyssey, 15 July 2010 - 08:47 PM.

My MOCS:
Posted Image
ÖBB Railjet High Speed train

My Flickr: flickr.com/odyssey2812

#8 greg3

greg3

    Posts: 489
    Joined: 16-April 10
    Member: 10297

Posted 17 July 2010 - 02:51 PM

Hi
Here's my entry in the LDD and Real Bricks Category...

CABLE TRAM

This came about because I wanted something to fill the gap on my shelf left by the 2 modular buildings I own. I thought of doing a street scene and hit on the idea of having a tram of some sort. A quick Google led to an old film clip of cable trams used in Melbourne from 1885 to 1940. I really loved the design of them and thought I'd give it a go. As with most of my MOC's nowadays I used LDD quite a bit to try out techniques and colours as I went along.
The tram is an open dummy car (in real life it was this tram that gripped the cable moving under the road, it would then pull a closed tramcar behind it) and I built a short section of track. The white stripe on the roadway is to instruct the driver (or gripman) to release the cable so the tram can coast over the pedestrian  crossing point before picking up the cable on the other side. The white pillar type thing is an emergency call box to allow the tram crew to signal the winding house should the cable need to be stopped (for example if a tram was derailed, the cable damaged or the track obstructed).

Posted Image

Posted Image

Posted Image

The real brick version... with added passengers, custom stickers and a few minor changes that I couldn't do on LDD  (namely attaching the 1x1 brick to the fence piece on the front for the headlight and the call box design)

Posted Image

Posted Image

LDD FILE

I'll post more pics and information after the comp closes.
Thanks for looking and good luck to all who enter...
Cheers
Greg

Edited by greg3, 17 July 2010 - 03:04 PM.


#9 private_lego

private_lego

    Posts: 89
    Joined: 12-June 10
    Member: 11437
    Country: Belgium

Posted 18 July 2010 - 07:22 PM

Hi,

This is a replica of the first electrical engine of the Belgian NMBS. The type is 101 or serie 29 later
It was first in service in 1949.
It is in the 2 color green paint.

As soon as a saw the engine, I know I had to build it sometime.
Now I did it.
The most difficult thing are the ventilation on the side, that are 1/2 plate appart & stick out 1/2 plate to the rest of the loc.
Many tries later I had a prototype. Only it used the technic brick 1x1 and headlights in the, according to LDD, illegal way.
So I redesigned the complete inner side of the engine.

Now I am waiting for my ordered bricks to arrive, to build it in real.
I will post foto's afer my vacation

My lxf file is here R29 - T101
Posted Image
Posted Image
Posted Image

The inside

Posted Image

Edited by private_lego, 18 July 2010 - 08:00 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users