3155 replies to this topic

[Superkalle]

ADHO15, on 13 May 2012 - 11:32 AM, said:

ERRORS:
Collision error between parts 30504 and 61409 (Book 1 p15)

Very odd that the TLG designer was allowed to use that technique, since it's old news that this is illegal.

ADHO15, on 18 May 2012 - 02:56 PM, said:

Part 61483 cannot connect to part (Book 3 p27)

It seems to because there is a 2x3 plate above that hinders full connection (in LDD). I've never seen this technqiue before. Looks like a borderline case of being legal or not.

[ADHO15]

Superkalle, on 18 May 2012 - 07:17 PM, said:

Very odd that the TLG designer was allowed to use that technique, since it's old news that this is illegal.

It seems to because there is a 2x3 plate above that hinders full connection (in LDD). I've never seen this technqiue before. Looks like a borderline case of being legal or not.

Why so when it's obviously possible? Is the grill slope too wide?

Hmm, I see. You mean the pin goes through the technic plate and the curved slope/bow and collides with the plate stuck on top? There doesn't seem to be room for the wider 'lip' of the pin, such as if you were to put the pin through the technic plate and stick an ordinary plate on top. It shouldn't be allowed.

[Superkalle]

ADHO15, on 18 May 2012 - 07:27 PM, said:

Why so when it's obviously possible? Is the grill slope too wide?

Hmm, I see. You mean the pin goes through the technic plate and the curved slope/bow and collides with the plate stuck on top? There doesn't seem to be room for the wider 'lip' of the pin, such as if you were to put the pin through the technic plate and stick an ordinary plate on top. It shouldn't be allowed.

About the grill slope - it's not wider then any other bricks, but because the hole in a technique bricks i positioned a 10th of a mm above the LEGO standard, it will create a slight, slight bend/missalignment towards the brick above it (the angle plate in this case) and thus it's illegal. TLG designers have not be allowed to use this technique for 4 or 5 years now. It's also partly the reason why the 1x1 brick with stud on the side was developed, because that stud is in fact in System.

About the technic plate - actually the central anti-stud of a plate is slightly recessed comparted to the bottom edge, and that's where I thought possibly the lip of the peg could fit. But on second thought I think this recessesion is less then height of the lip. So in my opinion - this is also illegal.

Hm, wonder if the the Superhero sets were rushed to the market and did not pass normal model review.  


EDIT: Forgot to mention. As a workaround, you can place the grill slope (cheese grater) like this
1) Remove the 32000 and both of the 4274
2) Place a 87087 (Brick with one stud on side)
3) Place the grill slope (which will now fit)
4) Remove the 87087
5) Put the 32000 in place.
6) Finally, place the two 4274.
Voila  

[Calabar]

ADHO15, on 18 May 2012 - 02:56 PM, said:

Quinjet Aerial Battle (LDD 4.2 - Superheroes)

You forgot the set's number. I've added it!  

[ADHO15]

Superkalle, on 18 May 2012 - 07:35 PM, said:

Voila  

Thanks, Superkalle. I've edited the model and updated my post above.

Calabar, on 18 May 2012 - 08:00 PM, said:

You forgot the set's number. I've added it!  

Oops! Thank you, Calabar.  

[ADHO15]

6866 Wolverine's Chopper Showdown (LDD 4.3.6 - Super Heroes: Marvel Heroes - Duplicate)
LXF File



ERRORS:
Incorrect/missing prints

Edited by ADHO15, 28 March 2013 - 02:31 AM.

[ADHO15]

6865 Captain America's Avenging Cycle (LDD 4.3.6 - Super Heroes: Marvel Heroes - Duplicate)
LXF File



ERRORS:
Incorrect/missing prints and stickers

6867 Loki's Cosmic Cube Escape (LDD 4.3.6 - Super Heroes: Marvel Heroes - Duplicate)
LXF File



ERRORS:
Missing part 75c06
Incorrect/missing prints and stickers

Edited by ADHO15, 28 March 2013 - 02:34 AM.

[CM4S]

9461 The Swamp Creature (LDD 4.2 - Theme: Monster Fighters)



LXF File

Errors:

• No prints

-Sci

Edited by Calabar, 04 June 2013 - 09:06 AM.
Image is still oversized. Anyway, I can't accept the image until the lxf file is not available.

[legolijntje]

Well, the rules say:

Quote

Insert a model
...
- and obviously... Share you lxf file!

So, you have to share the lxf. You don't have to use Brickshelf, you can also use for example Dropbox. You can also take a look here, for a tutorial of sharing lxf files using Brickshelf.  

[Calabar]

CM4S, on 27 May 2012 - 07:47 PM, said:

9461 The Swamp Creature (LDD 4.2 - Theme: Monster Fighters)

Thanks for the contribution.  

You should regularize your entry:

• image is oversized: you should stay inside a 512x512px square.
  As the set is small, a smaller size is more desirable (a 256/320px wide image is a more adequate size for it).
  
• image has horizontal and vertical blank stripes: you have to crop the image before resize it.
  
• lxf file missing: share the lxf file is necessary if you want to post a set in this topic.
  Look at the guide linked by legolijntje if you have any difficulties.

I suggest you to read the rules in the first post of this topic.  

PS: about missing pieces and decorations, it would be better if you would find a replacement for that, if there is any suitable.
Similar pieces and brick build solutions are often used by other builders.

EDIT:
I see you correctly cropped the image, now you should resize it. If you have any difficulties to do that, ask and we'll try to help you.
Anyway, as I wrote editing your post, I can't accept the image if you don't share the lxf file. Again, if you have any difficulties...

A little thing again. Looking at your screenshot it seems some colours are wrong. For example the legs of the hunter or the body of the creature.
I suggest you to check colours using, for example, this table and an inventory like this.

[Graysmith]

21016 - Sungnyemun - Theme: Architecture



Complete, except for missing printed tile (replaced with same 1x8 black tile but blank).

LXF file

[ADHO15]

To begin the Lord Of The Rings theme, here are...

9469 Gandalf Arrives (Lord Of The Rings - LDD 4.2)
LXF File



ERRORS:
Replaced parts 10048 with 87991, 10052 with 6132 and 10352c01pb01 with 75998
Incorrect/missing prints

9470 Shelob Attacks (Lord Of The Rings - LDD 4.2)
LXF File



ERRORS:
Missing parts 99781 and x77ac100
Replaced parts 10048 with 87991, 10053 with 95053, 95673 with 98370, bb559 with 50231, bb565 with 85861, Gollum's body with brick-built solution and Gollum's arm with 87568
Incorrect/missing prints
Collision error between parts 55236 and 4460 (p9)
Collision error between parts 41761 and 61510 (p31)

9471 Uruk Hai Army (Lord Of The Rings - LDD 4.2)
LXF File



ERRORS:
Replaced part 10050 with 48495, 10051 with 98366, 10054 with 6122, 10352c01pb01 with 75998, 90391pb01 with 4497, bb561pb02 with 59231 and bb566 with 61856
Incorrect/missing prints

9472 Attack On Weathertop (Lord Of The Rings - LDD 4.2)
LXF File



ERRORS:
Missing part 40243
Replaced parts 10048 with 87991, 10053 with 95053, 10352c01pb02 with 75998, 95673 with 98370, bb559 with 50231 and bb568 with 56630
Incorrect/missing prints

9473 The Mines of Moria (Lord Of The Rings - LDD 4.2)
LXF File



ERRORS:
Replaced part 10048 with 87991, 10088 and Elf hair with 40239, 91884pb04 with 3876, 94158b and bb482 with 4499, 95673 with 98370, bb559 with 50231, bb566 with 61856 Troll body with 60671, Troll left arm with 60673, Troll right arm with 60672, Troll left hand with 60641, Troll right hand with 60640, Gimli's helmet with 60748 and Gimli's beard with 60749
Replaced Olive Green with Lemon Metallic
Incorrect/missing prints and stickers

9474 The Battle Of Helm's Deep (Lord Of The Rings - LDD 4.2)
LXF File



ERRORS:
Replaced part 10050 with 48495, 10051 with 98366, 10054 with 6122, 10352c01pb01 with 75998, bb561pb02 with 59231, bb566 with 61856, Elf hair with 40239, Gimli's helmet with 60748 and Gimli's beard with 60749
Replaced Metallic Gold with Reddish Gold
Incorrect/missing prints and stickers

9476 Orc Forge (Lord Of The Rings - LDD 4.2)
LXF File



ERRORS:
Missing part x77ac50
Replaced part 10050 with 48495, 10051pb01 with 98366, 10088pb01 with 40239 and bb566pb01 with 61856
Replaced Olive Green with Lemon Metallic
Incorrect/missing prints

30210 Frodo With Cooking Corner (Lord Of The Rings - LDD 4.2)
LXF File



ERRORS:
Replaced part 10048 with 87991
Incorrect/missing prints
Cannot connect part 64647 to 52107

30211 Uruk Hai With Ballista (Lord Of The Rings - LDD 4.2)
LXF File



ERRORS:
Replaced part 10051 with 98366
Incorrect/missing prints

Edited by ADHO15, 03 June 2012 - 06:44 PM.

[Superkalle]

ADHO15, on 01 June 2012 - 10:31 PM, said:

9470 Shelob Attacks
ERRORS:
Collision error between parts 55236 and 4460 (p9)
Collision errors (p31, p33)

First error is definitely a collision error in the vine.
The second error however seems like an illegal build by TLG. I did manage to attach the assembly somewhat by rotating the axles, but there still isn't room for the string spool. Have a look at the attached file.

ADHO15, on 01 June 2012 - 10:31 PM, said:

9472 Attack On Weathertop
ERRORS:
Collision error between parts 85863 and 2339 (p25, p67)

Are you sure? I seem to get it to fit. If not, try if it will work with 76768.

Attached Files

•  shelob_attacks_trytofix.lxf   21.68K   9 downloads

[ADHO15]

Superkalle, on 02 June 2012 - 08:53 AM, said:

First error is definitely a collision error in the vine.
The second error however seems like an illegal build by TLG. I did manage to attach the assembly somewhat by rotating the axles, but there still isn't room for the string spool. Have a look at the attached file.
Are you sure? I seem to get it to fit. If not, try if it will work with 76768.

Thanks, Superkalle. I used your version of Shelob so that there is only one part left out instead. That string spool still collides with 41761 so that will have to be kept out.

I switched in 76768 instead and the statues can be placed correctly now. Thanks!

I've added the rest of the sets from the theme now.

[Superkalle]

ADHO15, on 03 June 2012 - 06:43 PM, said:

I've added the rest of the sets from the theme now.

  

[Calabar]

Index updated.

411 Sets has been added to the index (48 alternative, 39 duplicate, 5 incomplete).
Check your sets and report errors or inaccuracies in the index, if any!

2 Sets has not been added to the index because irregular.
Fix your sets in order to be added to the index!

List of Irregular Sets:  
- 6228 - Thornraxx - by Bonehead74 - Details Missing, LXF missing, Image Missing
- 9461 - The Swamp Creature - by CM4S - LXF missing, Image Oversized

Lists of previously reported irregular posts here, here, here, here, here, here, here, here and here.


Thanks again to AndyC that made the great part of the work!  

[Johan J]

n/a - Red Factory - Idea Book #226, pag 37



It's not for sale, but it's original LEGO. This was very fun and inspiring. It'll be a great add to my future town. Hope someone will enjoy it!
/Johan

Changes:
-antenna, winch, furnace doors, three doors, hook and attic window substituted with similar lookin
-furnace doors are too big to open, can't find anything that works
-walls are built so it works, since there's no instructions exactly what bricks should be used
-wires not included
-no vehicle and only one minifig



 226_factory.lxf   25.44K   11 downloads

Edit: fixed image

Edited by Johan J, 20 December 2012 - 05:06 PM.
Oversized image converted in text link (maximum size allowed is 512x512). Fixed set's data.

[Lego Otaku]

Just recently (last few days) LEGO dumped a whole bunch of new instruction manuals in PDF format including most of the new 2012 sets and many older sets not previously available.  There were 3 sets that I had never heard of but only one is available to download and others (4000005 and 4000012) gets me 404. Maybe it was listed too soon?There's also 4000001 moulding machine listed but not downloadable either  

The one new mystery set is the 4000002 LOM Moulding (click to download manual)

4000002 LOM 2011 Moulding - Theme: Miscellaneous
[duplicate]

Few more pages in the instruction book.  You should download and read em.

LDD file
Errors: no printed tiles:
- 1x8 tile with "September 2011" printed
- 1x8 tile with "LOM Moulding" printed

And before you ask, yes it is British spelling moulding with an u.

The instruction book looks like they were made in architecture style with back story on the building (in English and Spanish).  I copied the first couple paragraphs below:

Quote

When the first LOM facility, which included 182 moulding
machines in the Moulding Department, was completed in
2009, it was expected that it would meet The LEGO Group’s
capacity requirements for some years to come. However, sales
at The LEGO Group increased so quickly that there was soon
talk about expanding. Another building was available next to
the first facility, in another industrial park. Based on this building,
a new project was started to create a new moulding facility.
At the end of 2009, preparations started and the project was
approved by The LEGO Group Board of Directors in May 2010.

From May to July, a project group was established with
representatives from Facility, Engineering and Production.
Construction work started on July 14th, 2010 and the first
phase of the building was ready for infrastructural fitting in
January 2011. From January to September 2011, construction
and fitting work continued in parallel. After only 14 months of
work, construction ended in September 2011.

[Stephan]

Lego Otaku, on 07 June 2012 - 12:41 PM, said:

Just recently (last few days) LEGO dumped a whole bunch of new instruction manuals in PDF format including most of the new 2012 sets and many older sets not previously available.  There were 3 sets that I had never heard of but only one is available to download and others (4000005 and 4000012) gets me 404. Maybe it was listed too soon?There's also 4000001 moulding machine listed but not downloadable either  

Anyway the one new mystery set is the 4000002 LOM Moulding (click to download manual)

Nicely done, but you should list it as a duplicate. I already build this a few months ago...

Stephan

[Calabar]

@Lego Otaku
Could you add "indexable" set's data?
I need the set data are clear and well highlighted to approve the entry.

[Lego Otaku]

Stephan, on 07 June 2012 - 01:27 PM, said:

Nicely done, but you should list it as a duplicate. I already build this a few months ago...

Stephan

I didn't notice that, I blame broken formatting due to too many links on the first page

Calabar, on 07 June 2012 - 01:28 PM, said:

@Lego Otaku
Could you add "indexable" set's data?
I need the set data are clear and well highlighted to approve the entry.

Added in bold, with ]duplicate] included.

I do have an idea about the first page that got broken. How about a new thread that can only be edited by moderator and contains the master list of all sets, and leave this existing thread for user submission?

[Calabar]

@Lego Otaku
Thanks! ;)

About the index, the problem is due to its extreme length. It seems that the forum is not able to manage posts with more than about 286.000 characters.
We are discussion about the best solution, the one you are proposing now has been discussed and it seems it don't like to Superkalle (don't like to me too much too, too many topic to manage this index!), so probably we will try to add some post to split the index in two or more parts.

[ADHO15]

They are Architecture sets, so here are my versions of...

21013 Big Ben (LDD 4.3.5 - Architecture)
LXF File



ERRORS:
Missing print

21016 Sungnyemun (LDD 4.3.5 - Architecture)
LXF File



ERRORS:
Missing print

Edited by ADHO15, 20 September 2012 - 10:48 PM.

[legolijntje]

ADHO15, on 11 June 2012 - 12:47 PM, said:

No errors at all!  

Well, there are  
The sets are missing the printed tiles with the names  

And more important; there's a 1x4 tile on the back which is made grey instead of black (at the sungnyemun).

Edited by legolijntje, 11 June 2012 - 04:05 PM.

[Superkalle]

legolijntje, on 11 June 2012 - 04:04 PM, said:

Well, there are  
The sets are missing the printed tiles with the names  

And more important; there's a 1x4 tile on the back which is made grey instead of black (at the sungnyemun).

Ooaaahhhh. We got the legolijntje in the LDD topic.