Jump to content


[KEY TOPIC] Official LEGO Sets made in LDD

LDD Digital Official sets

  • Please log in to reply
4039 replies to this topic

#1251 petero

petero

    Posts: 121
    Joined: 14-February 10
    Member: 9562
    Country: USA

Posted 06 December 2010 - 12:18 AM

5919 In the Valley of the Kings - Theme: Adventurers (Desert)

This is an LDD 4 model.

5919 In the Valley of the Kings

Once again, I've used Calabar's outstanding brick-built sarcophagus to replace the sarcophagus and cover inside the building.

The car has been redesigned, because it uses the sarcophagus as its body.  I've tried to stay close to the original design of a sleek single-seater.

The other substitution is minor.  The trap door at the front of the building (under Baron von Barron's feet) has stops made with two 2452 Hinge Plate 1 x 2 with 3 Fingers On Side pieces, which aren't in LDD.  I substituted 32028 Plate 1x2 with Slide.

As usual, there are no printed pieces.

Posted Image

Peter

Edited by petero, 06 December 2010 - 10:43 AM.


#1252 petero

petero

    Posts: 121
    Joined: 14-February 10
    Member: 9562
    Country: USA

Posted 07 December 2010 - 01:45 PM

5978 Sphinx Secret Surprise - Theme: Adventurers (Desert)

This is an LDD 4 model.

5978 Sphinx Secret Surprise

Once again, I've used Calabar's outstanding brick-built sarcophagus.

Several obsolete pieces have been replaced with their modern counterparts: the car windshield, the hinged door under the tall obelisk, and a yellow goblet.

The paper tent does not exist in LDD.

The biggest substitution is the baseplate.  I've created a brick-built replica that has the proper shapes and elevations to show all the studs in the correct places.  The entire baseplate is colored 283 Light Nougat, to differentiate it from the set's tan pieces.  To revert to the original set's inventory, simply remove all of the Light Nougat pieces.

As usual, there are no printed pieces.

Posted Image

Peter

#1253 Aanchir

Aanchir

  • Color Encyclopedia


    Posts: 7422
    Joined: 31-December 09
    Member: 8841
    Country: United States

Posted 07 December 2010 - 03:04 PM

View Postpetero, on 07 December 2010 - 01:45 PM, said:

5978 Sphinx Secret Surprise - Theme: Adventurers (Desert)

This is an LDD 4 model.

5978 Sphinx Secret Surprise

Once again, I've used Calabar's outstanding brick-built sarcophagus.

Several obsolete pieces have been replaced with their modern counterparts: the car windshield, the hinged door under the tall obelisk, and a yellow goblet.

The paper tent does not exist in LDD.

The biggest substitution is the baseplate.  I've created a brick-built replica that has the proper shapes and elevations to show all the studs in the correct places.  The entire baseplate is colored 283 Light Nougat, to differentiate it from the set's tan pieces.  To revert to the original set's inventory, simply remove all of the Light Nougat pieces.

As usual, there are no printed pieces.

Peter
The yellow goblet actually should be available-- although the one you used is different and is sometimes used in place of the regular cone-shaped goblet, it did not replace the cone-shaped one. The goblet you're looking for is part 6269, so plugging that into the search bar should give that to you.

The search function is IMO one of the most useful tools added to LDD version 4. The ability to type in specific angles for the hinge tool is also up there with it in terms of usefulness.

Posted Image recommends the following sites:
Posted Image Posted Image Posted Image


#1254 petero

petero

    Posts: 121
    Joined: 14-February 10
    Member: 9562
    Country: USA

Posted 07 December 2010 - 05:00 PM

View PostAanchir, on 07 December 2010 - 03:04 PM, said:

The goblet you're looking for is part 6269, so plugging that into the search bar should give that to you.

According to the BrickLink inventory, it's 2343 Minifig, Utensil Goblet, which isn't in LDD.

Peter

#1255 messiah1

messiah1

    Posts: 40
    Joined: 07-July 10
    Member: 11866

Posted 08 December 2010 - 02:00 PM

10175 - UCS Darth Vader's TIE Advanced - Theme: Star Wars

Posted Image

This set is already in the index: clicky   But I wanted to build it so things were connected.  I had to modify some of the instructions to get it to work but I am very pleased with the outcome.

Download the LXF

Edited by messiah1, 10 December 2010 - 02:50 PM.

My Flickr Photostream mess1ah1 on Flickr

#1256 petero

petero

    Posts: 121
    Joined: 14-February 10
    Member: 9562
    Country: USA

Posted 08 December 2010 - 07:11 PM

UPDATED: 5988 - Pharaoh's Forbidden Ruins - Theme: Adventurers (Desert)

Lots of color corrections, added two minifigs, and a few other minor corrections.

Link to updated post

Peter

#1257 messiah1

messiah1

    Posts: 40
    Joined: 07-July 10
    Member: 11866

Posted 09 December 2010 - 05:02 PM

I have a question about the colors of set 7181 TIE Interceptor.  The colors from the Bricklink inventory clicky show Black, Dark Gray and Light Gray.  When you go to page 10 of the instructions from TLG clicky, the difference between the dark gray and the black is clear in step #2, but the inventory shows those two pieces as both being black.

Advice?

Edited by messiah1, 09 December 2010 - 08:21 PM.

My Flickr Photostream mess1ah1 on Flickr

#1258 Tore M

Tore M

    Posts: 67
    Joined: 13-July 10
    Member: 11970
    Country: Norway

Posted 09 December 2010 - 07:14 PM

Calabar:

I reported the wrong set number when posting the Dozer, the correct number is 7685, not 7865 Posted Image. The post has been updated accordingly, please include it in your next index update.

#1259 BasOne

BasOne

    Posts: 452
    Joined: 08-November 10
    Member: 14130

Posted 09 December 2010 - 08:34 PM

7685 City Bulldozer

Posted Image

7685 Bulldozer LXF

Missing:

Decals

Plate, Modified 2 x 4 Thin with Bottom Struts to Pins

View PostTore M, on 09 December 2010 - 07:14 PM, said:

Calabar:

I reported the wrong set number when posting the Dozer, the correct number is 7685, not 7865 Posted Image. The post has been updated accordingly, please include it in your next index update.

Well darnation, i checked the index and it was allready build.....  :wacko:

Edited by BasOne, 09 December 2010 - 08:51 PM.

Free speech?....... Yeah about as free as a Ferrari!!
Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws.
Laboro te salutante

#1260 Toa_Of_Justice

Toa_Of_Justice

    Posts: 569
    Joined: 01-February 08
    Member: 2644
    Country: United States

Posted 09 December 2010 - 10:12 PM

7712 - Supernova - Theme: EXO-FORCE

Posted Image

LXF File

This model is accurate to the instructions, except:

  • Takeshi's torso print and face weren't available, so I used alternatives.
  • Vladek's sword wasn't available, so I used Tahu's instead.
  • The flex hose isn't the right piece, but hey, it flexes! :grin: It was quite hard to fiddle with though. :wacko:
  • I couldn't find the 2x4 clear light brick, so I mocked one up.
  • As you can see, there are no decals either.

-Toa Of Justice

#1261 prateek

prateek

  • Study hard!


    Posts: 10402
    Joined: 09-July 05
    Member: 426
    Country: Canada

Posted 10 December 2010 - 02:39 AM

Is it okay to post unreleased sets? (i.e. the new Star Wars BPs?) :sweet:
If so, I've got them ready.

#1262 Calabar

Calabar

    Posts: 2197
    Joined: 11-April 10
    Member: 10232
    Country: Italy

Posted 10 December 2010 - 09:18 AM

@prateek
No, as topic's rules report, only officially released sets are allowed.
Wait the set will be released, and then post it here!

@Tore M
Thanks! Will be fixed in the next index update.
"Official LEGO Sets made in LDD" topic: Read guidelines before posting!

#1263 messiah1

messiah1

    Posts: 40
    Joined: 07-July 10
    Member: 11866

Posted 10 December 2010 - 02:56 PM

7181 - UCS TIE Interceptor - Theme: Star Wars

This set is already in the index by yellost: clicky  The instructions call for a piece for the wings that is no longer in LDD.  There seems to be a "kinda" replacement for it but it's 1 stud thinner and doesn't have the notch.  The replacement sort of works, as you can see in yellost's post but I didn't like the look of it.  I modified the wings, making them longer and more appealing to me.  I know it isn't "official", which is why it won't be indexed, although technically yellost's post is modified too.  I like the way this turned out.

Posted Image

Download the .LXF

I may need to change my gray colors around, but I don't trust the inventory just yet due to a question I had a couple posts up...

Edited by messiah1, 10 December 2010 - 03:02 PM.

My Flickr Photostream mess1ah1 on Flickr

#1264 Tore M

Tore M

    Posts: 67
    Joined: 13-July 10
    Member: 11970
    Country: Norway

Posted 10 December 2010 - 03:17 PM

View PostBasOne, on 09 December 2010 - 08:34 PM, said:

Well darnation, i checked the index and it was allready build.....  :wacko:

I'm sorry! Posted Image

#1265 BasOne

BasOne

    Posts: 452
    Joined: 08-November 10
    Member: 14130

Posted 10 December 2010 - 03:39 PM

View PostTore M, on 10 December 2010 - 03:17 PM, said:

I'm sorry! Posted Image
's ok  :laugh:
But you better not be building 7632 Crawler Crane.....

Not indexed, didn't see it browsing the pages.. so..  :grin:
Free speech?....... Yeah about as free as a Ferrari!!
Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws.
Laboro te salutante

#1266 BasOne

BasOne

    Posts: 452
    Joined: 08-November 10
    Member: 14130

Posted 10 December 2010 - 11:37 PM

Set # 7632
Name: Crawler Crane
Theme: City, Construction


Posted Image

7632 Crawler Crane LXF

Missing parts:

4490248 Technic Turntable Large Type 1 Base

4211381 Technic Turntable Large Type 1 top

String, Cord Thin 200cm

Errors:



Show and tell....



Technic, Pin Long without Friction Ridges Lengthwise does not fit all the way through.

Technic, Axle Towball does not fit into Hinge 1 x 2 Locking with 2 Fingers and Towball Socket.


Enjoy  :classic:

Edited by BasOne, 11 December 2010 - 12:41 AM.

Free speech?....... Yeah about as free as a Ferrari!!
Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws.
Laboro te salutante

#1267 Aanchir

Aanchir

  • Color Encyclopedia


    Posts: 7422
    Joined: 31-December 09
    Member: 8841
    Country: United States

Posted 11 December 2010 - 12:08 AM

View PostBasOne, on 10 December 2010 - 11:37 PM, said:

Both of these pieces are available on LDD. They are parts 60583 and 41669, respectively. 41669 is even available in every mode: Universe, DBM, Mindstorms, and Creator.

Posted Image recommends the following sites:
Posted Image Posted Image Posted Image


#1268 BasOne

BasOne

    Posts: 452
    Joined: 08-November 10
    Member: 14130

Posted 11 December 2010 - 12:27 AM

View PostAanchir, on 11 December 2010 - 12:08 AM, said:

Both of these pieces are available on LDD. They are parts 60583 and 41669, respectively. 41669 is even available in every mode: Universe, DBM, Mindstorms, and Creator.

I used the codes in the instructions and bricklink to search for them in LDD with the 'search' fuction, both came up blank  *huh*


Edit:
Found them, different code and discription from BL and instructions.....
Post updated

Edited by BasOne, 11 December 2010 - 12:37 AM.

Free speech?....... Yeah about as free as a Ferrari!!
Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws.
Laboro te salutante

#1269 Calabar

Calabar

    Posts: 2197
    Joined: 11-April 10
    Member: 10232
    Country: Italy

Posted 11 December 2010 - 12:32 AM

View PostBasOne, on 11 December 2010 - 12:27 AM, said:

I used the codes in the instructions and bricklink to search for them in LDD with the 'search' fuction, both came up blank  *huh*
Not ever Bricklink id match with lego id! ;)

PS: only one image for set: the second image in your post should be inserted as a text link!  :classic:
"Official LEGO Sets made in LDD" topic: Read guidelines before posting!

#1270 BasOne

BasOne

    Posts: 452
    Joined: 08-November 10
    Member: 14130

Posted 11 December 2010 - 12:40 AM

View PostCalabar, on 11 December 2010 - 12:32 AM, said:

Not ever Bricklink id match with lego id! ;)

PS: only one image for set: the second image in your post should be inserted as a text link!  :classic:

So i noticed  :grin:

No 'This is the place where the error is so you don't have to ask where the error is' images either?  :laugh:

Edited by BasOne, 11 December 2010 - 12:43 AM.

Free speech?....... Yeah about as free as a Ferrari!!
Nothing travels faster than the speed of light with the possible exception of bad news, which obeys its own special laws.
Laboro te salutante

#1271 Aanchir

Aanchir

  • Color Encyclopedia


    Posts: 7422
    Joined: 31-December 09
    Member: 8841
    Country: United States

Posted 11 December 2010 - 02:39 AM

View PostCalabar, on 11 December 2010 - 12:32 AM, said:

Not ever Bricklink id match with lego id! ;)

PS: only one image for set: the second image in your post should be inserted as a text link!  :classic:
Usually, when the Bricklink ID doesn't match the official LEGO ID, the piece either doesn't have the part number printed on it or has the part number very hard to read. This is the case with the BIONICLE eye piece, as well as a lot of other small and irregularly-shaped pieces. I'm surprised that the 1x1x3 with two clips doesn't have the correct number, though.

Another condition where Bricklink ID doesn't match up with LEGO ID is when a new version of an existing piece is released. Often, Bricklink will just add a "B" to the older part number. In some cases this is justified, as a new version of an older part sometimes won't have a new part number if the changes are minimal enough. But other times it is an error on Bricklink's part.

Posted Image recommends the following sites:
Posted Image Posted Image Posted Image


#1272 Superkalle

Superkalle

    Posts: 5552
    Joined: 21-December 08
    Member: 4755
    Country: Sweden

Posted 11 December 2010 - 10:53 AM

View PostBasOne, on 11 December 2010 - 12:27 AM, said:

I used the codes in the instructions and bricklink to search for them in LDD with the 'search' fuction, both came up blank  *huh*


Edit:
Found them, different code and discription from BL and instructions.....
Post updated
You can use LDD Manager to find parts. I've made this mapping between LDD and BrickLink ID's.
Eurobricks Digital Design Forum - for all your LDD and Ldraw cravings

#1273 Superkalle

Superkalle

    Posts: 5552
    Joined: 21-December 08
    Member: 4755
    Country: Sweden

Posted 11 December 2010 - 12:33 PM

View PostBasOne, on 10 December 2010 - 11:37 PM, said:

Set # 7632
Name: Crawler Crane
Theme: City, Construction


Errors:
Technic, Pin Long without Friction Ridges Lengthwise does not fit all the way through.
Strangely enough I managed to attach the peg by doing like this:
1) Remove the wheel
2) Remove one of the black 3176 COUPLING PLATE
3) Place the technic peg (it will connect to the remaining 3176)
4) Put back the other 3176 COUPLING PLATE  (notice how the technic pge now connects to both plates)
5) Place the wheel
6) Done

I have now clue why it will work when done in this "reversed" order, but it does.
Eurobricks Digital Design Forum - for all your LDD and Ldraw cravings

#1274 bischen

bischen

    Posts: 1
    Joined: 17-January 10
    Member: 9153

Posted 11 December 2010 - 01:20 PM

Set #: 5938-1
Name: Oasis Ambush
Theme: Adventurers (Desert)


Posted Image

LDD-File


the model isnt in the index yet, but its already uploaded a few pages before

i hope ive uploaded everything correctly, please tell me if it does not work (its my first post here)

Edited by bischen, 11 December 2010 - 02:20 PM.


#1275 legolijntje

legolijntje

    Posts: 2065
    Joined: 06-June 10
    Member: 11214
    Country: The Netherlands

Posted 11 December 2010 - 01:35 PM

View Postbischen, on 11 December 2010 - 01:20 PM, said:

Set #: 5938-1
Name: Oasis Ambush
Theme: Adventurers (Desert)

LDD-File

i hope ive uploaded everything correctly, please tell me if it does not work (its my first post here)

Welcome to Eurobricks!
The post is almost correct, but you only have to say if it's already in the index or not. And I think the picture is a little too big. You can resize it, or cut all the white edges off.





Also tagged with one or more of these keywords: LDD, Digital, Official sets

7 user(s) are reading this topic

0 members, 7 guests, 0 anonymous users