Posted 22 April 2011 - 04:36 PM
This is my first review of a new set on Eurobricks, I hope you enjoy it.
Set Number: 4183
Set Name: The Mill
Theme: Pirates of the Caribbean
Sub-Theme: Dead Man's Chest
Release Date: April 2011
Price: £40.99 UK
From the Lego Shop@Home description:
Capture the key to the Dead Man’s Chest!
The battle is raging for the key to the Dead Man’s Chest! Captain Jack Sparrow, Will Turner and Admiral Norrington are dueling to the death when the mill wheel suddenly shakes loose and sends the sword fight spinning out of control! Stay on your feet and clench control of that key before Hadras flees back to the Flying Dutchman with it!
The boxes for the Pirates of the Caribbean line are a lot smaller than previous licenced sets and do struggle to live up to their hefty price tag, however The Mill does have a box that shows off the features nicely.
In the Box:
The set is divided into four numbered bags with two instruction booklets and a poster showing a video-game-esque rendering of the set. The booklets, poster and sticker sheet were baggied up with a piece of cardboard to protect them from being crumpled.
There was no playing card with my set, which did surprise me. Perhaps they did not include one for this price point.
[Later note from comments below] It has been pointed out that only the sets taken from the upcoming "On Stranger Tides" film have the playing cards, it's not a price point issue at all. It's a shame that all sets in the line don't come with a card though. This would have been Norrington's time to shine! Although with the Admiral's luck, Hadras would have been chosen! He's on the side of the box, after all...
Here's a shot of all the pieces together, torn from the safety and comfort of the numbered bags.
The Mill contains four absolutely stunning minifigures.
The level of detailing is incredible and there is leg and back printing and alternate heads for all figures except Will, who doesn't get leg printing.
Captain Jack Sparrow appears in every set, but that's not too bad as his LEGO representation is a real winner. The difference for this version is that he comes with a big key, used to open the titular Dead Man's Chest which holds the heart of Davy Jones.
Will Turner is a pivotal character in the 3 POTC films, and this is a good representation of him. Love the hairpiece and the shirt detailing! He is also available in set 4182 Cannibal Escape.
Admiral James Norrington vies for the affections of Elizabeth Swann along with Will. Here, at this stage of the film he is a desperate pirate, but still showing off some very stylish (albeit slightly ragged) threads. Love the detail on the print! He uses Dastan's hairpiece from Prince of Persia, which is a reasonable reuse. The expression on his face is perfect, so hangdog. It's heartbreaking to see a LEGO figure so downcast. Definitely my favourite of the four. He is exclusive to this set.
Hadras is one of Davy Jones' mutated crew, due to his long service of the Flying Dutchman he is now more sea creature than human. His LEGO representation has tons of detail, and he's so cute! The shell piece on the head has been sculpted really well, and it even features printing! It is great to see one of Davy Jones' henchmen, would love to see more in future waves as I thought they were all visually very interesting. At the moment though, Hadras ought to be able to hang out with some of the Atlantis minifigs as he'd fit in well with those. Hadras is exclusive to this set.
Parts of Interest:
I found more as I was making the set, but these are all pretty cool. You get two copies of the key, and they are attached to a sprue like the Atlantis flippers or the gold coins are.
Here's a special shot of what's in the chest:
Lovely printing on the heart, the idea well executed by the designers.
First up you make the figures and Mill itself using bags 1-3, then the wheel gets to be made using bag 4.
It's a nice build, easy to do but the wheel gets a bit repetitive because of the number of sections you have to build.
You have to fold up the wheel around the central piece and slot the poles into the holes in the round part. This was actually a fun part of the build after building so many slat pieces.
The part I found hardest was attaching the rope to the bell at one end and the handle at the other. Sausage fingers!
It's a wee bit smaller than I'd like, especially at the price point, but it does look good.
These were the extra pieces:
See the next post for lots of action shots and a final summary.
 Changed pics to Flickr, added some more descriptive text.
Posted 22 April 2011 - 04:44 PM
Posted 22 April 2011 - 04:51 PM
First up, the fight and chase in the Mill itself:
It's a bit cramped, as the structure obviously isn't as big as the one in the film, but it is playable. Jack can use the rope holding up the bell to launch himself upwards. This play feature isn't great as there is too much slack in the line, but it does the job adequately:
The wheel can be knocked off its rest and roll off:
Push down on the lever to raise the wheel off its mooring:
Weeeeee! The wheel gains a lot of momentum and will travel quite a long way before stopping.
This adds so much fun and play value as the fight on the wheel was one of the best parts of the film. However if you have anyone on top of it before you launch they will fall off when you launch it, so beware!
Norrington and Will duel on the top of the wheel! However Jack chases up to them and manages to swipe the key:
But wait, because they're fighting each other, Hadras now has the Dead Man's Chest!
This is a set featuring great minifigures and a fun playset. The price is high, but as a licensed set, it's to be expected. However I think the level of detail the figures have make up for it slightly, as they are just gorgeous. The set contains lots of the same parts to build the wheel,and I guess the Mill parts perhaps aren't too exciting to all you Castle enthusiasts who have already built lots of grey towers, but this set does have some nice bonus stuff like the bottle and the heart of Davy Jones, as well as the key to the chest.
The Mill itself is quite small, but does have some real playablity with the wheel. I certainly had a lot of fun posing the figures and recreating the fight scene from the film whilst taking the pictures for the review. I think this is a license that fits extremely well into LEGO form and it should be a big success.
So, to put all the above into number form, and using Cloney's rating areas as a guide:
Parts: 7/10 - Mainly grey, brown and tan, some excellent new pieces.
Minifigures: 10/10 - Four absolutely superb minifigs, two of which are exclusive to the set.
Design: 8/10 - A good design for the piece count and price point. It is a good representation of the scene from the film.
Price: 6/10 - No beating around the bush here, it's expensive for what you get.
Playability: 9/10 - A very playable set.
Thank you for reading! Also see my full Flickr image gallery.
 Changed pic locations to Flickr and added in full ratings
Edited by Rumble Strike, 25 April 2011 - 12:48 AM.
Posted 22 April 2011 - 05:06 PM
It'll be on out blog in the next day, with so many reviews, we actually are all booked up for a while.
Do you love Classic-Pirates.com? Subscribe! to the new mailing list!
How to download LEGO instructions from LEGO.com
Visit my about me page for all of my Set reviews, and info about me!
Please read the Members Guidelines and check the Index of Tutorials (including re-sizing images)
Posted 22 April 2011 - 05:27 PM
Edited by Blackicep8ntball, 22 April 2011 - 05:28 PM.
Posted 22 April 2011 - 05:41 PM
I think it's a toss up betwen which pirate set I get, this one or cannibal escape. I still don't know.
Posted 22 April 2011 - 07:06 PM
Posted 22 April 2011 - 10:25 PM
The play features and minifigs are what sells the set though the tower walls are just panel built....what else is new for Lego....it's called short cuts !
In any case it's a cool set and really can't wait to bring this and the rest of POTC in to our collection.
Brick On everyone on the high seas !
Posted 22 April 2011 - 11:00 PM
Convicted on Day 5 playing as Town member Geert Rotterdam in Sandy's Escape from Isla Paradisa
Posted 22 April 2011 - 11:20 PM
This set has a lot of great parts which feature in almost all of the other sets as well, like the bucket, the bottle and the compass.
But the special things of this MOC are awesome as well, like Hadras his shell, Norrington and the wheel of course.
I think this set is also very useful for MOCing so I would have given it 4 out of 5. The price is a bad point again.
Read the site guidelines
Index of helpful tutorials
Posted 23 April 2011 - 02:37 AM
Currently playing as the Sheriff Kenneth Emanuel in Tamamono's Silver City Mafia
Posted 23 April 2011 - 04:49 AM
<Insert computer-editted picture here>
<Insert cool links here>
Posted 23 April 2011 - 06:05 AM
Posted 23 April 2011 - 10:06 AM
I was very skeptical about the interior and the patchiness of the building when I saw the first pictures of it. I'm more convinced about the details: they're good enough for a set like this, but I still think the building looks too patchy. Even for a ruined mill I find it a bit lacking. Overall I find this one of the weakest in the PoTC line, but the figs and the parts selection still make it a fairly good set.
Posted 23 April 2011 - 10:15 AM
Lord Of The Dark Isle
Posted 23 April 2011 - 11:36 AM
Posted 24 April 2011 - 03:23 AM
Posted 24 April 2011 - 07:06 AM
I have noticed, though, that the only sets that come with the card are the sets related to POTC: On Stranger Tides. I didn't get one in The Cannibal Escape, but did in both The Captain's Cabin and Fountain of Youth.
Posted 25 April 2011 - 12:05 AM
I am pleased with how my photos came out and I hope it comes across how much fun I was having in taking them.
Regarding the lack of playing card, thanks Santhor and colethegeek, I hadn't noticed it was just for On Stranger Tides sets. A shame. I have amended the review with a note to that effect as well as adding in more descriptive text and a proper ratings system.
Canada 7, I got the London Escape along with this set as in the UK TRU was doing a 3 for 2 offer. I also got the X-Wing from Star Wars as it was closer in price to the two POTC sets I got. I think I wanted The Mill more simply because I'd seen the film that it was relating to. With the reviews of the On Stranger Tides sets some of the play features are not clear as to what they are for or why they appear, at least until we get to see the films.
Edited by Rumble Strike, 25 April 2011 - 12:11 AM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users