42043 - Mercedes-Benz Arocs 3245 Rating  

425 members have voted

  1. 1. How do you rate this set?



Recommended Posts

15624317003_e8eb01e330.jpg

REVIEW - 42043 - MERCEDES-BENZ AROCS 3245

19200282962_09f25877ac_c.jpg

INTRODUCTION

So here we are, finally. Last year the Volvo review was published at the beginning of June, so you all needed to wait a little bit longer for this one. Rumors started early December of a licensed Mercedes set. What could it be, a truck, a car? Christmas Eve revealed the LEGO Technic 42043 Mercedes-Benz Arocs 3245.

The eager anticipation of news about a new model always has its special moments. This time Paul (Boratko) had seen a first glance of the model. This resulted in one or two questions being asked. What's the color scheme? Does it have pneumatics? Does it have new pneumatic parts? Does it have double wheels on the rear axles? Does it have front suspension? Does it have this, does it have that?

Was I excited at the moment? Hmmm not really. To be honest; I figured this would be the Unimog all over again. It's a public secret that I am not the biggest fan of the Unimog. A pneumatic crane that doesn't work too well, flaws in the steering mechanism and the model is leaning to one side, because of the battery box. Don't get me wrong; it is a decent model, and it definitely looks great, but it just doesn't cut it for me. So my initial thought was "will this be better than the Unimog?". We will find out at the end of this review :wink:

The model is designed by Markus Kossman, who is lead designer at TLG and is known for some other flagship sets (among other models):

It's safe to say that Markus has some experience when it comes to designing trucks.

At the beginning of each stage, I state how long it took me to finish it. Mind you, that when I'm building for a review, I lose a lot of time shooting pictures. So your building time will probably be 70% to 80% of my time.

Note: Pictures, taken with a Canon 70D with 50mm Canon prime lens, can be clicked for hi-res versions.

SET INFORMATION

Number: 42043

Title: Mercedes-Benz Arocs 3245

Theme: Technic

Released: 2015

Part Count: 2793

Box Weight: 4455 gr

Box Dimensions: 57,8 cm x 47,8 cm x 12,2 cm

Model Dimensions: 54 cm x 23cm/51cm x 15cm (wo crane/w crane)

Set Price (MSRP): Approximately € 200

Price per Part: Approximately € 0,072 per part

Links: Brickset

THE BOX

The box is the same size as last year's 42030 - Volvo L350F (review). It's huge and it's heavy. Weighing in at almost 4,5kg, this actually does feel like the biggest Technic set ever. Unfortunately my box was severly damaged upon delivery. Even the outer box was damaged, and looked like someone had opened it. Luckily, the actual box was only damaged, instead of opened, so all the parts where still there.

18876720149_19db955d3e_c.jpg

FRONT SIDE

The front of the box shows the model (nothing new here), the Power Functions logo AND the new Pneumatics V2 logo. Hopefully we will see the last logo more often in future sets. Under the Pneumatic logo, all new pneumatic parts are shown. Three of the five parts are simply redesigned parts, but the two 11L cylinders (1x1 and 2x2) are brand new.

18875179830_fcf106ef45_c.jpg

INSIDE

The inside of the box shows most of the features and functionality, combined with some fun facts about the real Arocs. The model will measure 54 cm upon completion.

19042255699_7fab26d0b0_o.jpg

SIDES

One of the sides shows the model and the two logos, while one of the other sides shows all the Pneumatic V2 and Power Functions parts.

18440369414_228c0591ba_c.jpg

19062897335_3b1b8f254a_c.jpg

CONTENT OF THE BOX

Being the biggest Technic set to date, means lots of parts. 2793 to be precise.

  • 2 bags with 6 wheels
  • 1 bag with instructions and stickers
  • 1 bag with pneumatic parts
  • 1 bag with L motor
  • 1 battery box unbagged
  • 4 bags #1
  • 2 bags #2
  • 5 bags #3
  • 2 bags #4
  • 6 bags #5
  • 2 bags #6

SQUARE BOUND BOOK

Like the 42039 - 24 Hours Race Car (some of them) this set has a square bound book sealed in a bag together with the sticker sheet. I really do like a single bound book, but when TLG divides the build into 6 stages, providing 6 booklets also makes sense. This would make building with your children a great deal easier.

18442223523_0e40e4d8c4_c.jpg

The instructions for the A-model count 105 steps, covering a whopping 471 pages!

19062897015_e4ae56a646_c.jpg

The sticker sheet with stickers for the A-model and two stickers (#25) for the B-model, apparently a Mercedes-Benz Actros 1845.

18440360974_d71eed9881_c.jpg

For the first time (to my recollection) the 62.4mm D. x 20mm Tires are packed in bags. Normally they are scattered between the sealed bags.

18875177950_cf99cdffe4_c.jpg

The new Pneumatic (V2) parts have been neatly packed together in a single bag. The hoses are cut to length, which makes assembly more straightforward. There's no need to measure and cut the hoses yourself.

18875177770_8b244b6029_c.jpg

The L-motor comes in a bag, while the battery box doesn't. Normally the battery comes in a bag too. Since it has a slightly different color than the previous version, maybe the manufacturer or manufacturing process has changed.

19066098101_c77c849af1_c.jpg

NUMBERED BAGS

A total of 21 numbered bag, divided over 6 build stages. You can click on the bag to show a hi-res version of the picture.

19036662606_9a0a6bcdd8_m.jpg 18875170350_947f9ca6e1_m.jpg 19036662416_d290a19b89_m.jpg

19062894585_1cbbc34402_m.jpg 19036661876_7d2899f6f8_m.jpg 18440360114_dcd2a8d0de_m.jpg

18876724869_74c7e25e13_m.jpg 19062893875_558a481091_m.jpg 19066095621_9fc5fc759a_m.jpg

19062888185_2af1a33824_m.jpg 18440365444_af2d831169_m.jpg 18875175250_ff83c3460b_m.jpg

18442219163_98db43fd87_m.jpg 18875174840_ce96848bc1_m.jpg 18875174700_c3a54e3580_m.jpg

18442214343_f9aa4e39b0_m.jpg 19036660196_2bfc48a539_m.jpg 18440364314_d770c6b172_m.jpg

19066093991_969ca02c91_m.jpg 19036659546_95684ec360_m.jpg 18440363764_7f249fc3c7_m.jpg

HIGHLIGHTED PARTS

This chapter describes the interesting and/or new parts in this set.

BATTERY BOX

The color of the new battery box is slightly different than the old one. The dark bluish grey is much darker and the light bluish grey seems to be slightly different too.

18876727279_0c8ab0ccee_c.jpg

VERY SMALL SMOOTH PANELS IN WHITE

For the first time a set comes with very small white panels (#21) and very small white panels (#22). These two panels complete the range of white panels available.

19206129855_01426cb8e5_n.jpg 19180020296_2c32a252b7_n.jpg

WHITE PANELS

Four other types or white panels are used in the cabin.

19180020206_59089be41c_c.jpg

NEW 60T TURNTABLE

That kinda looks like a new turntable under the crane.

Allanp was absolutely right about the introduction of a new 60 teeth turntable, resembling its smaller brother (bottom and top).

19209795421_63b0cd7dbb_n.jpg 19200288052_445485fa04_n.jpg

19200281972_c77898a460_n.jpg 19018573678_1c88e92fbe_n.jpg

As you can see in the comparison shot below, it's not much bigger than the old version. The design is much better, resulting in a smoother operation. The potential downside is that the new turntable doesn't have teeth in the inside, which can be limiting. That being said; I still think that this design is better than the old one, so thanks to TLG for bringing us this new turntable! Hopefully TLG will some day release an XL version with this design.

19206136135_71c3a4e31c_c.jpg

TIRES

Nothing special about these tires, besides coming in a sealed bag. So, why am I showing these tires anyway? It has nothing to do with the tires itself, but with the quantity. For the first time an official LEGO set contains more than 10 of these tires. The 42009 - Mobile Crane Mk II counts 10 of them and the same goes for the 8285 - Tow Truck from 2006. The latter also had double wheels on both rear axles, but it only had two front wheels.

18875208428_c3d656b261_c.jpg

CRANE AND OUTRIGGER LIFTARM BRACKET AND GEARRACK

I'm not sure what the part names will be, but crane arm outside and crane arm center are used for similar parts in the City theme. I will stick to Liftarm Bracket and Gearrack. These two new parts are perfect for outriggers and crane sections, but I am eager to see what MOC-ers come up with. I do see an application for Mindstorms Robots or TC7 Contest entries. The red section, containing the gear rack, is 15L. The gear rack itself is 14L.

18875198878_7c6b2c6723_c.jpg

19057294412_8d89647060_c.jpg

CLAMSHELL BUCKET

Two clamshell buckets are introduced in this set. After the Grabber Arm Claw, this is welcome addition for crane enthusiasts.

19209788571_7df94d4f21_c.jpg

19200287922_99dc5c3d04_n.jpg 19180022696_6398f2403c_n.jpg

PNEUMATIC V2

Save the best for last, the new Pneumatic parts! Some people like pneumatics, some people don't. Nonetheless, it's great that TLG hasn't abandoned Pneumatics in favor of Lineair Actuators. They have redesigned some of the existing parts and even designed brand new ones. Some people on this forum will be so thrilled with these new parts.

The outlets of every element have been redesigned in a way that the hose will be easier to attach. This means the existing elements do have new moulds too.

19062888695_7f38a64ab9_c.jpg

SMALL PNEUMATIC CYLINDER

The Small Pneumatic Cylinder isn't a new part, but it has been redesigned with new outlets. On the right you can see a comparison between the old (right) and new (left) cylinder

19066097571_bbb6d85290_n.jpg 18440367784_052af6aab6_n.jpg

SMALL PNEUMATIC PUMP 6L

Like the small cylinder, the Small Pneumatic Pump 6L has also been redesigned. And TLG has used blue again, instead of the Unimog pump, where they used grey. I do like the blue version better, although you will probably not clearly see the pump in the finished model. The right pictures shows the three different versions of the pump.

18442221913_53dfd826d1_n.jpg 19066097421_d8904d8e9e_n.jpg

NEW 2x2 11L PNEUMATIC CYLINDER

The new 2x2 11L Cylinder is 4 studs longer than the old Pneumatic Cylinder. I wonder if TLG will release a new version for the 7L cylinder as well. The picture on the right shows the 7L (right) and new 11L cylinder (left).

19066090001_517b4ba927_n.jpg 19036663196_85961f8c0a_n.jpg

NEW 1x1 11L PNEUMATIC CYLINDER

When you do need length, but not a lot of power this new 1x1 11L will perfectly fit your needs.

18442214773_c2505b8b26_n.jpg 19057299132_39d0f693b9_n.jpg

PNEUMATIC SWITCH

The new version of the switch is simply a redesign of the old Pneumatic Switch with modified outlets. The pictures on right shows the comparison.

19057298902_316285999e_n.jpg 18876725949_701482eea7_n.jpg

PART LIST

The part list, spreading over 3 pages, counting 2793 parts.

18875209138_4a895bd92d_m.jpg 18876727599_b173f5e513_m.jpg 18875170900_727c357731_m.jpg

THE BUILD

The build consists of 6 stages:

  1. Front-end of the chassis
  2. Outriggers and gearbox
  3. Rear-end of the chassis
  4. Crane
  5. Cabin
  6. Tipping bed

STAGE 1: FRONT-END CHASSIS

Bags: 4

Duration: 120 minutes

You start by building the front section of the chassis, with a small part of the cabin. No new parts are introduced in this stage, except for some newish parts from 1H 2015 and 2014, like Pin and Pin Hole and 3L Axle Pin with 1L Axle.

19062887845_90ca38c018_c.jpg

The Arocs has a 6 cylinders inline fake engine. Of course the piston will move when you drive the vehicle.

18876722459_45f1cf7cf0_c.jpg

Here's a picture of the actual engine, used in the new Arocs.

18638431944_4b87875d95_z.jpg

New 6-cylinder in-line engines with a particularly robust design and a longer life.

An 88003 - PF L Motor is placed behing the fake engine, facing backwards. This motor is connected to a gearbox, which we will build in the next stage. This single motor will power all the motorized functions.

19036659006_8369472e82_c.jpg

Below you see the first front axle, with suspension. The 9L Technic Link is used to steer the front wheels. The front suspension uses the yellow Hard Spring Shock Absorbers, resulting in pretty stiff suspension.

18876722219_aea26d918b_c.jpg

When the assembly is connected to the chassis, the 9L Technic Link is connected to a pivot point. Rotating the pivot point will move the link back and forth causing the front wheels to steer.

19036655226_312c6359f2_c.jpg

The second axle is connected to the chassis. This axle uses a 6L Technic Link for steering. Using different links results in different steering angles for both axles. I did notice a strange anomaly; the front axle does have 1L Round Pin Connectors, while the second axle doesn't. The leftover parts only show one extra?!

18876721909_3c73510f36_c.jpg

The video below shows how the steering mechanism works.

Make sure the 12 Teeth Bevel Gear on the right is placed properly. I placed the gear in the same position as the one on the left, resulting in one of the lights making the model steer to the left side when turned right, and vice versa.

19066088961_68ef8b40aa_c.jpg

The two pictures below show the model after stage 1. The build is okay so far. The most interesting thing about this stage is obviously the steering mechanism, attached to the pendular suspension. The mechanism is unlike steering mechanisms found in other models, so this required some out of the box thinking.

19057294662_95c41edda1_n.jpg 18442216953_aa73db843b_n.jpg

STAGE 2: OUTRIGGERS AND GEARBOX

Bags: 2

Duration: 45 minutes

The first step of the second stage starts with the new bracket and gear rack. The outriggers could easily have been designed without this new gear rack, but since TLG designed it for the crane (probably); why not use it here.

18442216553_f3d4b46508_c.jpg

The stabilizers on the outriggers are operated manually. It would have been great to have motorized pads too, but it's not a big deal.

18442213593_4cd7f0c4f7_c.jpg

The two outriggers are linked together in opposite directions. The new parts provide a compact solution, but there are no fixed mounting points for the driving gears.

18440362234_b2ee537e33_c.jpg

The gearbox consists of two layers with gears. The lower part of the gear box contains the Pneumatic Pump, much like the one found in the Unimog. Two black 12T Bevel Gears are driving the gear racks.

18875202098_0cafaf6aed_c.jpg

The upper layer of the gear box contains the white Clutch Gear. This gear prevents the motor from stalling and overheating when the end of a function has been reached.

19062889885_4218ffe837_c.jpg

At the end of stage 2 the gearbox and outriggers are connected to the front-end of the chassis. The truck is slowly taking shape. At this stage I was still not 100% convinced what I would think of the complete model.

19062889515_6748f695ef_c.jpg

STAGE 3: CHASSIS REAR-END

Bags: 5

Duration: 135 minutes

With 135 minutes, the second longest stage in the build. In this stage you will build the rear-end of the chassis, with suspension and drive train.

19062887085_a92a48fbab_c.jpg

Four Flexible Rubber Axles are used in the base of the chassis. I am not entirely sure why TLG used these parts, since you will lock the assembly using liftarms. Possibly, it's a construction used in the real Mercedes, or these parts will be used in the B-model. I would love to hear your thoughts.

19200289082_e90cb65104_c.jpg

The tilting mechanism for the bed uses a Linear Actuator, instead of Pneumatics. I have made a mistake by placing two of the Pin Connectors in a wrong angle. Won't be the last error with these connectors.

18588023563_f99d8a37ac_c.jpg

The Rear suspension on the real Mercedes is actually a leaf spring suspension. TLG is mimicking this suspension type, by using the relatively new Steering Arms found in the 42021 - Snow Mobile and 75060 - Slave 1.

19202745842_c86f8e530c_c.jpg

Picture of the real rear suspension.

19073294060_347745d396_z.jpg

The steel suspension on the Arocs impresses in every situation with its robust, solid construction, high performance and loadability.

Two differentials are linked together using a small turntable. Although being linked together, the two axles still have the ability to move independently.

19200288742_9e8f830245_c.jpg

The model will have two live axles, linked together by a drive train through the small turntable.

Live axle vs Dead axle

A live axle is a type of beam axle in which the shaft (or shafts, since live axles, while connected to move as a single unit, are seldom one piece) also transmits power to the wheels; a beam axle that does not also transmit power is sometimes called a dead axle. While typically used in vehicles with Hotchkiss drive, this suspension system can also be used with other types of power transmission.

Or, to quote Allanp, who was right again:

The rear axles are a single unit (suspended by 4 springs) that pivots longitudinally to allow the two axles to twist independently from each other by means of a 28t turntable piece allowing full suspension and both rear axles to be connected to the engine whilst all fitting between the dual rear wheels. Simples!

18585563353_94cdf91cfc_c.jpg

Here's a video showing the rear suspension and drive train.

WARNING

We've all been there, a model with two differentials and one of them is turning the wrong way. TLG has published an explicit warning in the building instructions. Pay attention to the position of the differentials!

18583621374_fedeb3a579_c.jpg

After building the rear-end of the chassis, you will be merging it to the front-end of the chassis. This was the point where I needed to move my camera backwards a lot. The model is growing big.

Double rear wheels on both axles, suspension and two live axles is quit a feat, especially regarding the limited available space. For me this stage was the turning point in the build. From now on you actually see the impressiveness of the model.

19018574028_8aa7492b7d_c.jpg

STAGE 4: CRANE

Bags: 2

Duration: 120 minutes

Only two bags are provided for this stage, but it still took me quite some time. Connecting the pneumatic hoses does take more time than simply adding connectors. This stage did offer a variety of new parts, like the Pneumatic V2, new Turntable and the two Clamhell Buckets.

19180022536_127c373ea8_c.jpg

Pre-cut hoses are quite convenient. The instructions clearly show which length you will be needing. There's little difference between 216mm and 240mm so watch out.

18583620384_f61ba18bca_c.jpg

The new 60 Teeth Turntable is mounted on the base of the crane. It turns a lot smoother than the old version. TLG really nailed this one!

19018495250_6de894faeb_c.jpg

Normally I build in my LEGO room, but this time I was building in the living room. I was building, combined with reading topics on Eurobricks. At that moment I was reading Drakmin's response in the Technic Photography topic. He stated that he'd like to see making of pictures, combined with the end result. This made me take the next picture, where you can see my working place. And as you can see, sometimes a LEGO model needs a little spicing up :wink:

19206135945_cc3cc960da_c.jpg

The bottom view of the crane shows lots of tubing, which will add difficulty when you connect the crane to the chassis. The tubing is touching one of the gears, so you need to push the hoses aside. There's quite some stress on the hoses, so it can be difficult to get everything into place.

19209788481_c2cf6f6a28_c.jpg

A lot of Pneumatic Hose Connectors are used to guide the various tubes alongside the jib and booms. Instead of using a single longer hose, the sections are linked together using these connectors.

19018573138_31b575c66e_c.jpg

The picture below shows the complete crane assembly. Normally I am not the biggest fan of pneumatics or building the crane on a truck, but I had a lot of fun building this one. Not sure why, but the size of the crane is very impressive and the techniques/parts used are pretty cool.

18583619574_049273c2df_c.jpg

STAGE 5: CAB

Bags: 6

Duration: 150 minutes

Stage 5 is the longest stage in the build. And it's probably the most rewarding, since you will see the truck come to life.

19206133045_09d59e2ed6_c.jpg

You start by building the front bumper. The rear view shows how the slanting grill is achieved.

19200286742_71ea0d4e20_c.jpg

The name Kossmann is clearly visible on the plate, making no mistake that Markus Kossmann designed this model.

19019996579_be7a9a485f_c.jpg

The front bumper is connected to the chassis by simply using connectors. The axles with the gears are sliding into the 7L liftarm, keeping them in place.

18585561113_04f191075a_n.jpg 19200281502_b496148ce6_n.jpg

At this point the chassis with crane is mostly done. You only need to add the rear bumper, before you can start building the cabin.

19206134925_c92c742263_c.jpg

The cabin grill is comprised of lots of Perpendicular Double Split Axle and Pin Connectors.

19018489100_d8d213b559_c.jpg

I really like the design of the seats, because of its simplicity. The printed Mercedes logo adds a lot of value to the cabin. Here you can see another mistake I made with the pin connector. No way the steering wheel will fit like this.

19206134475_d485f43609_c.jpg

The Mercedes introduces two new white panels. They are used as "cab side edge turning vanes", which improve aerodynamics. There was some discussion about the looks of the cabin, but seeing it in real life, I can only draw a single conclusion; this cabins is one of the most beautiful cabins LEGO has ever designed/released. The front view is stunning!

Here you can clearly see that I accidentally moved the head rests and didn't return them to the proper position. You will see this discrepancy returning in multiple photo's.

19019995519_5dde25fa7f_c.jpg

I found a mistake in the manual, which can be somewhat confusing. I didn't look at the image when connecting the cab to the chassis, but when I did take a look when I was shooting pictures, I noticed this small flaw. The circle with the arrow, doesn't match the outlined image on the right. The circle with the arrow needs to be placed lower than its current position.

19206132535_ed81147e6e_n.jpg 19200280932_c9f08b2827_n.jpg

Here you can see the tilting mechanism on the actual model.

19019991119_96a8f47b19_c.jpg

Front view of the cabin and grill. It does make you wonder whether this could have been the right moment to introduce a Dark Bluish Grey 11x3 Curved Panel.

19019994739_24851b4a85_c.jpg

The front is instantly recognizable as a Mercedes. Obviously the Mercedes emblem helps a lot, but without the star it would have been clear too. At first I wasn't too happy with the white and dark bluish grey color scheme, but seeing it in real life makes a world of difference.

18586137413_45d68687db_c.jpg

Here's a picture of the actual cabin. The main difference is that the LEGO version only has three bars, instead of 4. I can live with this. The bottom front section of the cabin seems to be some sort of metal, so maybe Markus was right by using the light bluish grey panel.

19260878515_fb233b4912_z.jpg

The radiator grille designed in a bucket tooth look lends the Arocs a striking, unmistakeable face and underlines its power and robustness.

The leftover parts, I forgot to add to the previous shot.

19206132885_6e00195f1d_c.jpg

STEP 6: TIPPING BED

Bags: 2

Duration: 30 minutes

This is by far the easiest stage of the build, consisting of mainly grey panels and liftarms.

18585558413_99cf76bb8f_c.jpg

The intersection shows the simple construction of the tilting bed.

18583617874_a7507827f4_c.jpg

The finished bed looks....well uhhmm grey. A cool thing about the tipping bed is the lock at the end. This locks the tailgate of the bed to prevent cargo falling out.

19209791241_e44fffdc3c_c.jpg

FINISHED MODEL

After 10 hours of building the model is finally finished! I reckon most of you will do this in 8 hours (or less), if you don't rush the build. Markus delivered a great looking model, which is even more impressive in real life, than in pictures. As you can see in the picture below, there is quite some strain on the base of the crane assembly, where the pneumatic switches are mounted. Some of the hoses at the base can probably be cut a little shorter, to save space.

19206952036_361061cda9_c.jpg

BOTTOM VIEW

The bottom view shows the entire chassis, with suspension, steering and drive train.

19236792311_12b5dd650c_c.jpg

Some of you said the wheels are too small and there's too much space between the wheels and the arches. Looking at pictures of the real Arcos, the second front arch, could have been placed a stud lower.

18639537114_0b74878bed_z.jpg

Those minor details set aside, the finished model resembles the Arocs a lot!

19180017986_3be3888abf_c.jpg

Even the rear view gives you the feeling you are looking at a real truck.

19019072200_36d2556f38_c.jpg

With extended outriggers and stabilizers and operating the crane. I forgot to put the wheel chocks between the rear wheels for extra safety.

18587823803_80273a6a91_o.jpg

My reviews always contain pictures taken in a photo studio. Unfortunately, this doesn't do this model real justice. That's why I left my comfort zone and went out to shoot some pictures at a local construction site. A friend of mine is the manager of the site and he happens to be building his own new house over there as well. There's no better excuse to take the Mercedes for a drive in his natural habitat. And while we are at it, why not let the Volvo tag along for the ride.

19052377458_29b09ef720_c.jpg

19052344630_5264c3d7ae_c.jpg

18619389653_86f39bef06_c.jpg

19243730241_4539f775d4_c.jpg

19239956085_634d26f4a0_c.jpg

FEATURES AND FUNCTIONS

This set has quite a few features and functions. Controlling them is done by a combination of using the L-motor as a pump for the Pneumatic functions or by switching it to control three other functions. Switching is done by moving the levers on either side of the model. Reversing the function is done by the switch on the battery box. In the beginning this can be quite confusing. Since you are used to using a lever to switch between back and forth, I ended up switching between functions, instead of reversing the current function.

19227507115_ef1491a87d_c.jpg

19201421166_91b6cb988f_c.jpg

MOTORIZED FUNCTIONS

The Mercedes uses a single L-motor to motorize 4 functions:

  • Rotating the crane
  • Extending/retracting the outriggers
  • Tilting the bed
  • Compressor pump

PNEUMATIC FUNCTIONS

When the motor is driving the compressor, again 4 functions can be operated (as shown in the two images above):

  • Opening and closing the bucket(s)
  • Lowering/raising lower boom section
  • Lowering/raising upper boom section
  • Extending/retracting the jib

MANUAL FUNCTIONS

There are also quite some manual functions on this model:

  • HoG Steering
  • Tilting cabin
  • Working fake enginge
  • Wheel chocks
  • Opening doors
  • Stabilizers
  • Tailgate tilting bed lock

FEATURES

Below is a list of the most important features:

  • Double wheels on both rear axles
  • Leaf sprung suspension on rear axles
  • Two live rear axles
  • Independant pendular suspension on front wheels

OPERATING THE FUNCTIONS

The long list of functions and features is great, but the most important question is "do they work properly?". Operaring the functions takes a little getting used to. Maybe it's just me, but I tend to get confused on whether to move the switch on the battery box or the lever on the side. For example; when you extend the outriggers and you want to retract them, you need to switch the battery box, instead of the lever, resulting in rotating the crane. Actually, I know that I am not the only one, since the guy demonstrating the model, didn't quite get it right too. Of course, after making the same mistake several times, you get used to it :wink:

It helps a lot when you manage to use the right switches and levers. All the motorized functions work perfectly. The pneumatic functions do work a lot better than the crane on the Unimog, with a side note that movement can be a bit jerky sometimes. This is caused by gravity or strain on the pneumatic hoses. Besided the incidental jerky movement, you can actually fully operate the crane, which is something you'd expect from a flagship like this.

Before we go any further, let's take a look at a video I shot demonstrating the functions:

The video seems to be slightly out of focus. Sorry for that. As you can see in the video, I still need to find my way around the functions. The jerky and sometimes slow movement of the pneumatic functions is also visible. However, I still think the crane is as good as you will get using LEGO and Pneumatics. Lifting the entire crane simply requires a lot of power. All in all I am very pleased with the playability of the model.

Here's an extra image, showing the truck with the cabin and bed tilted.

19045414490_e2c07be722_c.jpg

B-MODEL

Since the building instructions are not available yet, I couldn't build the B-model. This appears to be a Mercedes-Benz Actros 1845, as you can see on the back of the box. The cabin has more or less the same design, but the chassis is different.

18606937993_172ca74ba2_c.jpg

SUMMARY

Here we are, at the end of this review. The main question I posed at the beginning of this review "Is this set better than the Unimog?" can be answered with a loud "Yes!". Your milage may vary, but the pneumatic crane is more advanced and it is working better than the one on the Unimog. There's no problem with the model leaning to one side and steering, although not perfect on this model either, works better than the Unimog.

Which brings us to the obvious next question. Is this set also better than the 8258 - Crane Truck? The 8258 is absolutely a fantastic set (probably the most highly acclaimed truck to date), but to be honest; I think the Mercedes just kicked it from the throne. Without stickers, the 8258 doesn't look nearly as good as the Mercedes. Add the ongoing list of functions to the mix and the only possible conclusion is; the Mercedes is the best LEGO Technic Truck TLG has ever released.

Aren't there any negative remarks? Of course there are, but they are minor. Because the steering mechanism uses more gears than usual, there's more torsional strain on the axles. Pneumatic control of the crane can be a bit jerky or slow. There are a lot of hoses between the switches and underneath the base of the crane, which requires applying some force when you attach it to the chassis. You also need to be mindful that the gear on the chassis doesn't touch one of the hoses.

Here's a complete list with Pros and Cons:

PROS

  • The model looks awesome
  • Biggest Technic set to date
  • New Pneumatic (V2) parts
  • 4 Motorized functions
  • 4 Pneumatic functions
  • The crane actually works
  • Double wheels on rear axles
  • Leaf sprung rear suspension
  • Pendular front suspension

CONS

  • Steering causes torsional strain on axles
  • Pneumatic controls can be a bit jerky (or slow)
  • Lots of hoses underneath the base of the crane

The last question I need to ask myself, is this set better than the Volvo L350F or the 8043 - Motorized Excavator? I'm not sure about that, but I will conclude this review by saying that the Mercedes did land a spot in my Top-3.

SCORE

How do I grade this set?

9 DESIGN

16218294336_cc3a1c982b_m.jpg

Resembles the real deal a lot.

9 BUILDING EXPERIENCE

16218294336_cc3a1c982b_m.jpg

The model grew on me during the build.

9 FEATURES

16218294336_cc3a1c982b_m.jpg

Packs a ton of features.

9 PLAYABILITY

16218294336_cc3a1c982b_m.jpg

The model offers lots of playability

9 PARTS

16218294336_cc3a1c982b_m.jpg

Pneumatics V2 and lots of other interesting parts.

9 VALUE FOR MONEY

16218294336_cc3a1c982b_m.jpg

You get a lot of Mercedes for your money.

9 BEST TRUCK TO DATE

Thanks for reading and feel free to ask questions! More pictures can be found on my Flickr page.

FINAL WORDS

For those of you who are interested, I have tracked the time working on this review. I ended up putting around 35 hours in it, divided over:

  • 2 hours of unboxing and taking pictures of contents
  • 10 hours of building
  • 3 hours of photo processing
  • 18 hours writing the review
  • 2 hours on construction site

Share this post


Link to post
Share on other sites

Okay, here we go! Hope you enjoy this review.

Share this post


Link to post
Share on other sites

Photos are beyond amazing, as usual, Jim :)

This set really reminds me of 42008 in how the functions work together.

Edited by Sariel

Share this post


Link to post
Share on other sites

I only want its new pieces, It is awesome but I have bricks enough.

Edited by jorgeopesi

Share this post


Link to post
Share on other sites

Really nice review. Outstanding photos, and while I appreciate the studio shots for their detail, I think the truck looks better in the outdoors shots. The steering system looks really clever, especially because it's so simple yet ( seems) very reliable. My attempts at building link-steering systems for a truck did not fare so well.

Overall, I'm very, very pleased with this set and will be a day 1 buy for me. Just beautiful :wub:

Also Jim, the purpose of those flexible rubber connectors is to allow the upper pivot points of the 4 steering arms to slightly move in towards each other when the suspension is compressed. I don't know if that made sense, I'm not very good at explaining. The rear suspension would not work with completely rigid pivots.

Share this post


Link to post
Share on other sites

Arrghh I NEED THIS NOW :laugh: I'm pretty sure that they're releasing this set in September here so I have to wait for another two months yet, but it will we worth it when I walk into Toyworld and put in an order for two of them :classic: Good review Jim, you have confirmed all my hopes in this set.

Share this post


Link to post
Share on other sites

When's your review coming?

Sariel is posting his reviews at midnight California time and if I remember correctly that's in 6 hours and 15 mins.

EDIT: It's 8 hours and 15 mins.

Edited by Kiwi_Builder

Share this post


Link to post
Share on other sites

Absolutely fantastic I cannot wait to get this set. Great photos as well :thumbup: .

P.S. thanks for the name dropping :blush: . It's hard being right all the time :laugh:

Edited by allanp

Share this post


Link to post
Share on other sites

Fantastic review of obviously a fantastic set. You truly mastered that reviewing business! I really like the comparison with the actual parts of the real truck! Thanks a lot, now a loooong wait once more, until it hits the stores...

Edited by MajklSpajkl

Share this post


Link to post
Share on other sites

Absolutely amazing review! The time you put into it really shows/reads! The photos are beyond superb!

The set seems to be pretty much as expected, will definitely buy a copy, mostly for the parts! Then to wait for the pneumatic parts to be available in the online Lego store!

Great work Jim! :thumbup:

Share this post


Link to post
Share on other sites

Your reviews never cease to amaze, incredible job as always Jim! Quick question: How sturdy is it? Obviously, being from TLG, the chassis is ridiculously sturdy, but are there any parts, like the bumpers or the cabin that feel a bit loose? I just want to know, even though I'm probably not getting the set (way out of my budget).

Share this post


Link to post
Share on other sites

I don't understand why the Lego Design Team keep doing this thing where you build something awesome... And then have to end that experience with the dullest part of the build.

Chances are that truck bed could have been done before the cab was build. (I'll probably start my build with that truck bed)

Share this post


Link to post
Share on other sites

this will be a 1st day buy for me. hope i can find it locally :look: great review!

Share this post


Link to post
Share on other sites

Thanks for the review Jim! Great review and fantastic pictures.

This set looks amazing! I'm looking forward to building this. It looks like the suspension design has some compromises, but considering the small amount of space, I'd say it turned out nice.

The new turntable will come in handy, and I really like the longer pneumatics. Those will be useful on one of my current projects.

Share this post


Link to post
Share on other sites

Friggentastic! I honestly was on the fence about this one, but it looks like it's going to make (another) hole in my wallet.

When will it be available in stores?

Share this post


Link to post
Share on other sites

Nice review and, of course, really nice pictures :thumbup: I like your pro style to take care of business with these reviews :classic: Really cool and nice set with lots of cool functions and new pneumatics :thumbup: I still think though at this stage of my Lego Technic hobby, maybe I dont buy it just yet but don't get me wrong it is at least a 9/10 :laugh: Thank You Jim, you are the man!

Share this post


Link to post
Share on other sites

WHOA. Fact is, it took me a second reading just to let the model's greatness sink in. Now for a few things...

  1. I so do want to use the 1/11 cylinder in a 4-wide heavy-equipment model (16-axle mobile crane) and the 2x2/11L in a 6-wide model (a mix of this one and this one, but with more axles), but I worry about the integration of the cylinders, the valves, and the pump, especially in 4-wide. Do these cylinders work on their own? And will they break when they do so?
  2. Those new turntables. They'll be some most-wanted parts, but if they show up in more sets... well, why not?
  3. Pure intimidation on the last construction-site shot. Would be mistaken for the real thing.
  4. It rocks. Expensive, yes (I need more scratch cards!), but seriously, Jim, make this a family heirloom, one that can be passed to future generations.

Share this post


Link to post
Share on other sites

I have been waffling on this model since the initial pictures were released. Upon seeing them I was excited to get it, but recently the excitement has waned. This review spiked it again, and I will definitely get this set. Thanks for spending so much time and effort on this presentation; it's excellent.

Share this post


Link to post
Share on other sites

Can I be a moderator too :laugh: :laugh:

Another fantastic review Jim. Your quality is some of the best out there and I love reading these reviews.

Regarding the model, I think TLG really outdid themselves with this one. Honestly in some ways this model could pass for a MOC as its attention to detail is very good, and it gives every previous legendary set a run for its money. I was planning to get the new Ferrari creator set, but I think this will have to replace it. America will probably get it late :hmpf_bad:

Share this post


Link to post
Share on other sites

Great review.

It seems like the rubber connectors over the rear axles were used to allow for the fore/aft flex of the steering arms as they move through their travel. Since the two rear axles are connected together something had to allow for this flex.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.